Genisis LV and Box Kronos

[emonty]

Full power is the power that the battery holds...just a wild guess.....

It is indeed VV, and lets you set it to between 60 and 100% of full power via PWM. What full power is however, I am not quite sure.

sent from my HTC genisis using Tapatalk

 

[kcos]

Well it's to bad that we need to have (wild guesses)

 

[eyebrook]

The little I understand is its software driven and being PWM is very economical with batt life

 

[emonty]

My wild guess is correct plus what eye stated.......

 

[ukeman]

my impression (since i am non tech minded) is that "regulated" and with PWM, that the voltage will be "true"; not like a typical "3.7" pv. The voltage will be true to setting during life of battery charge cycle.... no?
Whether it's adjustable (3.4, 3.7, 4.0) or not, the above is great imo, given you can match your atomizer with the resistance you want and get a consistent vape, and if we are talking genesisLV, well the resistance is going to be set, obviously.

With some juices, and atty types, a lower setting is desirable. With the LV, you will set resistance to power. I'm good.

 

[Quick1]

Well it's to bad that we need to have (wild guesses)

There is a very specific description (a couple actually) back in the middle of this thread somewhere. I clarified (re-worded) what Tai-pan said in that description in a subsequent post but I've forgotten now (I didn't plan on ordering one).

The main idea is that you get *constant* performance through a battery usage. It doesn't gradually taper off from freshly charged to depleted. You get the same vape all the way through. In addition it will allow you to reduce the (constant) voltage of a standard LiIon battery. Many people prefer those eGo and the likes batteries that produce something like 3.1v. A regular LiIon will start out somewhere close to 4.2v and gradually run down to 3.6v. vaping on a fresh battery will be much different than when it's half used. This eliminates that.

 

[asdaq]

I don't recall either what was stated. I think it is one 18650, but not absolutely sure. Also, what other electronics are in there to define the 100% are still unclear.

 

[kcos]

I don't recall either what was stated. I think it is one 18650, but not absolutely sure. Also, what other electronics are in there to define the 100% are still unclear.

exactly my thoughts !!

 

[eyebrook]

Yep 1 batt I asked that question

 

[kcos]

I'm just asking what are we getting not when.

 

[emonty]

I ordered 2, must have been for a reason, i don't remember.... A well whatever, I trust the guy knows what he is doing....

 

[asdaq]

It was only post #18 deep

Box Kronos

A lot of mails and PN reached me and therefore here some answers:

The box is in the production state. The construction is ready for calculation and we will do the layout and PCB now. When the PCB is ready the constructor will change his design to optimize the size of the box. Than we go in production.
Time Frame: about three month

Features:

Box body out of aluminum powder coated in this colours:
- transparent (polished and transparent coating)
- RAL 9005 - jet black
- RAL 5017 - traffic blue
- RAL 6026 - opal green

- 18650 unprotected battery in a battery holder with protection circuit
- PCB in SMD
- micro processor controlled
- main switch on the PCB
- battery connector holder where the connectors can easily be changed
- polished brass ring around the atomizer hole 21/19,5 mm
- reduction ring out of polished brass for the eGo users, 21/14,5 mm
- Mini USB connector for charging the battery
- charger 5V/500 mA with Mini-USB

Program
- PWM
- regulateable voltage between 50% and 100%
- low battery warning at 3,4 V
- electronic lock by software
- red and green LED for status indication

 

[ukeman]

I like it... regulated, and low batt warning (!) love that. This is not your eGo batt by any means.

 

[kcos]

That's all German to me

 

[eyebrook]

Its sophisticated vaping and being an European the quietness of the Coop does not surprise me, we wait thats the way it is

 

[MXBNW]

That's all German to me

Making a Funny: Hope this helps LOL

Box Kronos

Viele Mails und PN erreichte mich und deshalb hier einige Antworten:

Die Box ist in der Produktion Zustand. Die Konstruktion ist bereit für die Berechnung und wir werden das Layout und PCB jetzt tun. Wenn die Leiterplatte fertig ist der Konstrukteur ändert sein Design, die Größe der Box zu optimieren. Als wir gehen in Produktion.
Zeitrahmen: ca. 3 Monate

Features:

Kastenaufbau aus Aluminiumpulver in dieser Farbe beschichtet:
- Transparent (poliert und transparente Beschichtung)
- RAL 9005 - Tiefschwarz
- RAL 5017 - traffic blau
- RAL 6026 - opalgrün

- 18650 ungeschützten Batterie in eine Batterie-Halter mit Schutzschaltung
- PCB in SMD
- Mikroprozessorgesteuerte
- Hauptschalter auf der Platine
- Batterie-Stecker Halter, wo die Anschlüsse leicht verändert werden kann
- Messing poliert Ring um den Zerstäuber Loch 21/19, 5 mm
- Reduzierung Ring aus poliertem Messing für die eGo Benutzer, 21/14, 5 mm
- Mini-USB-Anschluss zum Aufladen der Batterie
- Ladegerät 5V/500 mA mit Mini-USB

Programm
- PWM
- Regulateable Spannung zwischen 50% und 100%
- Batterie-Warnanzeige bei 3,4 V
- Elektronische Sperre per Software
- Rote und grüne LED zur Statusanzeige

 

[emonty]

Google translated: good shiit!

 

[MXBNW]

That's all German to me

Do not feel bad even after over 18 months of vaping I can get confused as well. I try to suck up as much as I can but electronics is just not my thing. I understand just enough to know if it will work for me or not the rest I leave up to a few trusted ECF member to fill me in and put there stamp on it.

Standing Buy

 

[jdubious]

Do any mainstream mods use PWM?

 

[mj64]

I'm sure it will be pretty slick device. But, being a super picky American I could not deduce if it was the correct device for me from the descriptions and dialogue so I did not order any. However, if it turns out to be not to the liking of any of you that ordered one I imagine you'll have no problem turning it over at cost.