Tilemahos Armed Eagle (TAE) 23mm
12*2 (1) cap
20*1 (1) cap
19*1 (1) body upper section
19*1,5 (1) body lower section
14*1 (2) feeding base
18*1 (1) under feeding base
3*1,5 (1) 510 pin
4*1 (1) 510 center pin
3*1 ad center pin 1,5mm + 2,00mm
6*1,5 (1 or 2) drip tip
Tilemahos Armed Eagle (TAE) 25mm
3x1,5 (1) 510 center pin
4x1 (1) 510 center pin
6x1,5 (1 or 2) drip tip
12x2 (1) cap
22X1 (1) cap
20x1 (1) body upper section
21x1,5 (1) body lower section
16x1 (2) feeding base
20X1 (1) under feeding base
Tilemahos Armed
13*1 (2) base
14*1 (1) clear tank
15*1 (1) alternative for clear tank
16*1 (1) alternative for clear tank
17*1 (1) alternative for clear tank
10*3,5 (1) cap
6*1,50 (1) center post extension
6*1,50 (1 or 2) drip tip
3*1,5 (1 or 2) ad center pin
Cybrillion
11x1 (2) between body and button (the one of them is spare)
17x1,5 (1) lock
16x1,5 (1) negative plastic and for lock as spare
17x1,5 (1) atomizer cap
Proteus
0,75x1 (1) button
8x1,50 (2) atomizer center post
1,5x1 (1) skylight
14x1,5 (2) AD ring
Penelope V4 mini
3x1 (3) around AD center pin
3x2,5 (1) around center post extension
11x1 (1) around base's threads
9x3 (1) inside refilling cap
Tilemahos V2
3x1 (3) around AD center pin
5x2 (1) around center post extension
14x1 (1) around base's threads
14x1 (2) or 16x1 (2) around base where AD ring sits. (You put 16x1 if your AD ring doesnt sit as tight as you want to the base)
10x3 (1) inside refilling cap
Tilemahos V2
3x1 (3) around AD center pin
5x2 (1) around center post extension
14x1 (1) around base's threads
14x1 (2) or 16x1 (2) around base where AD ring sits. (You put 16x1 if your AD ring doesnt sit as tight as you want to the base)
10x3 (1) inside refilling cap
GG4S
17x1,5 (1) inside the main brass body
1,78x1,78 (1) around button center pin
16x1,5 (1) inside the regular cap
15x1,5 (1) around AD cap's plastic
14x1 (1) around AD cap (where AD ring sits)
Tilemahos V1
3x1 (2) around center pin
4x2 (1) around center pin
18x1,5 (1) inside AD ring
14x1 (1) around base
9x3 (1) inside refilling cap
Tilemahos's mouthpiece drip tip: Mouthpiece drip tip needs the new refilling cap that takes 10x2,5 o-ring
Esterigon
18x1,5 (2) ad ring
8x1,5 (4) around atomizer center post (2) and around battery center post (2)
10x1 (1) around negative battery insulator
16x1 (1) around venting cap
4x2 (1) around locking cap
2x1 (1) button
Penelope V3
10x1 (2) housing and base
9x3 (1) inside refilling cap
3,5x2 (1) under the center post
Ithaka new rebuildable part
3,5x2 (1) under the brass center pin
14x1 (1) around the housing
Penelope V2
12x1,5 (1) base
9x3 (1) inside refilling cap
3x2 (1) under the center post
5x1,5 (2) around the AD mouthpiece tip
6x1,5 (1) spare o-ring to replace one of the 5x1,5, in case you want a more steady mouthpiece tip
New JustGG
7x1,5 (2) or 8x1,5 (2) around the center post of collector tank (8x1,5 makes the center post tighter on collector tank)
3x1,5 (2) around the center post of the 510 connection
20x1,5 (1 or 2) inside the air control ring (2 o-rings makes ring tighter)
14x1 (1) around the external threads of the Lid (optional)
JustGG
6x1,5 (1) around the axis that is attached on venting cap
7x1,5 (2) or 8x1,5 (2) around the center post of collector tank
3x1,5 (2) around the center post of the 510 connection
21x1,5 (2) or 20x1,5 (2) inside the air control ring
14x1 (1) around the external threads of the Lid (optional)
Telescopic mouthpiece
5x1 (1) around the external threads of the small upper external body
3x1,5 (1 or 2) on the neck of the polygonal internal body
Ithaka
9x2,5 (1) inside small top cap
3x2 (1) under the center post
21x1,5 (1) inside control ring
14x1 (1) around the basic feeding
16x1 (2) around both sides of steel or clear window
17x1 (2) around the base and around the upper body
Penelope V1
11x1,5 (1) base
8x3 (1) inside refilling cap
1,78x1,78 (1) under the center post
Odysseus
15x1,5 (5) fat Odysseus base, between refilling cap and body, on the 2 sides of the clear window, GGTS Odysseus base
1,78x1,78 (2) around the small slot in the base of the pin (UFS mode only) and under center pin (all modes exept UFS mode)
9x1,5 (1) inside 510 cone
6x1,5 (1) top of the CE2 adapter
11x1 (1) thin Odysseus base (dripping mode)
9x2 (1) between caps
Odysseus short mode
15x1,5 (2) Odysseus base, between refilling cap and body
1,78x1,78 (1) under the center pin
9x2 (1) between caps
Odysseus short mode (new rebuildable style)
15x1,5 (2) Odysseus base, between refilling cap and body
1,78x1,78 (1) under center pin
9x2 (1) between caps
3x2 (1) under the center post's top nut
Iatty
13x1,5 (1) base of the connector
3x1,78 (2) around ceramic
4x2 (1)under mouthpiece
13x1,5 (1) GGTS native base
GGTS
2x1 (2) inside connector
15x1,5 (1) between connector and CT
21x1,5 (1) inside CR
14x1 (1) outside of the lids
9x1,5 (1) inside 901-510 lid
11x1,5 (1) inside 801 lid
UFS
9x1,5 (2) connector
15x1,5 (2) connector, lower part of steel window
2x1 (2) inside connector
21x1,5 (1) CR
16x1,5 (1) upper part of steel window
5x1,5 (1) extension 510
9x2 (1) under mouthpiece
14x1,5 (1) base of UFS
4x1,5 (1) under the pin
16x1 (1) upper body
AVS
8x2 (1)base of 901 atomizer inside AVS
9x2,5 (1) between 2 caps
16x1,5 (1) big refill cap
5x1,5 (1) 510 atomizer extension
AFS
8x3 (1) base of 901 atomizer inside AFS
15x2,5 (1) base of the tank where it meets the CR
19x1,5 (1) inside CR
9x3 (1) between 2 caps of the AFS tank
16x1,5 (1)big refill cap
12x1,5 (1) base of the connector
For more info:
GGTS on Wiki GGTS - E-Cigarette Wiki
UFS on Wiki AVS v3 - E-Cigarette Wiki
AVS on Wiki AVS - E-Cigarette Wiki
AFS on Wiki AFS v2 - E-Cigarette Wiki
12*2 (1) cap
20*1 (1) cap
19*1 (1) body upper section
19*1,5 (1) body lower section
14*1 (2) feeding base
18*1 (1) under feeding base
3*1,5 (1) 510 pin
4*1 (1) 510 center pin
3*1 ad center pin 1,5mm + 2,00mm
6*1,5 (1 or 2) drip tip
Tilemahos Armed Eagle (TAE) 25mm
3x1,5 (1) 510 center pin
4x1 (1) 510 center pin
6x1,5 (1 or 2) drip tip
12x2 (1) cap
22X1 (1) cap
20x1 (1) body upper section
21x1,5 (1) body lower section
16x1 (2) feeding base
20X1 (1) under feeding base
Tilemahos Armed
13*1 (2) base
14*1 (1) clear tank
15*1 (1) alternative for clear tank
16*1 (1) alternative for clear tank
17*1 (1) alternative for clear tank
10*3,5 (1) cap
6*1,50 (1) center post extension
6*1,50 (1 or 2) drip tip
3*1,5 (1 or 2) ad center pin
Cybrillion
11x1 (2) between body and button (the one of them is spare)
17x1,5 (1) lock
16x1,5 (1) negative plastic and for lock as spare
17x1,5 (1) atomizer cap
Proteus
0,75x1 (1) button
8x1,50 (2) atomizer center post
1,5x1 (1) skylight
14x1,5 (2) AD ring
Penelope V4 mini
3x1 (3) around AD center pin
3x2,5 (1) around center post extension
11x1 (1) around base's threads
9x3 (1) inside refilling cap
Tilemahos V2
3x1 (3) around AD center pin
5x2 (1) around center post extension
14x1 (1) around base's threads
14x1 (2) or 16x1 (2) around base where AD ring sits. (You put 16x1 if your AD ring doesnt sit as tight as you want to the base)
10x3 (1) inside refilling cap
Tilemahos V2
3x1 (3) around AD center pin
5x2 (1) around center post extension
14x1 (1) around base's threads
14x1 (2) or 16x1 (2) around base where AD ring sits. (You put 16x1 if your AD ring doesnt sit as tight as you want to the base)
10x3 (1) inside refilling cap
GG4S
17x1,5 (1) inside the main brass body
1,78x1,78 (1) around button center pin
16x1,5 (1) inside the regular cap
15x1,5 (1) around AD cap's plastic
14x1 (1) around AD cap (where AD ring sits)
Tilemahos V1
3x1 (2) around center pin
4x2 (1) around center pin
18x1,5 (1) inside AD ring
14x1 (1) around base
9x3 (1) inside refilling cap
Tilemahos's mouthpiece drip tip: Mouthpiece drip tip needs the new refilling cap that takes 10x2,5 o-ring
Esterigon
18x1,5 (2) ad ring
8x1,5 (4) around atomizer center post (2) and around battery center post (2)
10x1 (1) around negative battery insulator
16x1 (1) around venting cap
4x2 (1) around locking cap
2x1 (1) button
Penelope V3
10x1 (2) housing and base
9x3 (1) inside refilling cap
3,5x2 (1) under the center post
Ithaka new rebuildable part
3,5x2 (1) under the brass center pin
14x1 (1) around the housing
Penelope V2
12x1,5 (1) base
9x3 (1) inside refilling cap
3x2 (1) under the center post
5x1,5 (2) around the AD mouthpiece tip
6x1,5 (1) spare o-ring to replace one of the 5x1,5, in case you want a more steady mouthpiece tip
New JustGG
7x1,5 (2) or 8x1,5 (2) around the center post of collector tank (8x1,5 makes the center post tighter on collector tank)
3x1,5 (2) around the center post of the 510 connection
20x1,5 (1 or 2) inside the air control ring (2 o-rings makes ring tighter)
14x1 (1) around the external threads of the Lid (optional)
JustGG
6x1,5 (1) around the axis that is attached on venting cap
7x1,5 (2) or 8x1,5 (2) around the center post of collector tank
3x1,5 (2) around the center post of the 510 connection
21x1,5 (2) or 20x1,5 (2) inside the air control ring
14x1 (1) around the external threads of the Lid (optional)
Telescopic mouthpiece
5x1 (1) around the external threads of the small upper external body
3x1,5 (1 or 2) on the neck of the polygonal internal body
Ithaka
9x2,5 (1) inside small top cap
3x2 (1) under the center post
21x1,5 (1) inside control ring
14x1 (1) around the basic feeding
16x1 (2) around both sides of steel or clear window
17x1 (2) around the base and around the upper body
Penelope V1
11x1,5 (1) base
8x3 (1) inside refilling cap
1,78x1,78 (1) under the center post
Odysseus
15x1,5 (5) fat Odysseus base, between refilling cap and body, on the 2 sides of the clear window, GGTS Odysseus base
1,78x1,78 (2) around the small slot in the base of the pin (UFS mode only) and under center pin (all modes exept UFS mode)
9x1,5 (1) inside 510 cone
6x1,5 (1) top of the CE2 adapter
11x1 (1) thin Odysseus base (dripping mode)
9x2 (1) between caps
Odysseus short mode
15x1,5 (2) Odysseus base, between refilling cap and body
1,78x1,78 (1) under the center pin
9x2 (1) between caps
Odysseus short mode (new rebuildable style)
15x1,5 (2) Odysseus base, between refilling cap and body
1,78x1,78 (1) under center pin
9x2 (1) between caps
3x2 (1) under the center post's top nut
Iatty
13x1,5 (1) base of the connector
3x1,78 (2) around ceramic
4x2 (1)under mouthpiece
13x1,5 (1) GGTS native base
GGTS
2x1 (2) inside connector
15x1,5 (1) between connector and CT
21x1,5 (1) inside CR
14x1 (1) outside of the lids
9x1,5 (1) inside 901-510 lid
11x1,5 (1) inside 801 lid
UFS
9x1,5 (2) connector
15x1,5 (2) connector, lower part of steel window
2x1 (2) inside connector
21x1,5 (1) CR
16x1,5 (1) upper part of steel window
5x1,5 (1) extension 510
9x2 (1) under mouthpiece
14x1,5 (1) base of UFS
4x1,5 (1) under the pin
16x1 (1) upper body
AVS
8x2 (1)base of 901 atomizer inside AVS
9x2,5 (1) between 2 caps
16x1,5 (1) big refill cap
5x1,5 (1) 510 atomizer extension
AFS
8x3 (1) base of 901 atomizer inside AFS
15x2,5 (1) base of the tank where it meets the CR
19x1,5 (1) inside CR
9x3 (1) between 2 caps of the AFS tank
16x1,5 (1)big refill cap
12x1,5 (1) base of the connector
For more info:
GGTS on Wiki GGTS - E-Cigarette Wiki
UFS on Wiki AVS v3 - E-Cigarette Wiki
AVS on Wiki AVS - E-Cigarette Wiki
AFS on Wiki AFS v2 - E-Cigarette Wiki
Last edited: