Penny has smaller room between body and mouthpiece and also shallow channels (but wider). Solution is very simple Jes. Just cut wick totally flash to the channels (dont put wick on channels at all)
GG Tilemahos V2 and Penelope V4 mini official thread
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Also this procedure (with toothpaste) makes clear tank totally clean, like a glass. Thats what Vasilis told me the other day. Is Vasilis right Ariel?
I remember imeo said one day that he didn't want to make clear tank for penelope because it makes thick juice harder to wick. I don't remember if it was penny 1 or 2 or 3 or 4 
. But he did it anyway because of many requests. Maybe sellers should put a warning on the item that it might not perform well with thick juices.
Nothing wrong about that.
. But he did it anyway because of many requests. Maybe sellers should put a warning on the item that it might not perform well with thick juices.Nothing wrong about that.
So if I understand well, polishing the plastic inside the tank will make the surface smoother and reduce the friction ... correct?
I'll try the toothpaste with a brush ... peny is definitly too tight for my fingers (no pun intended ... promise).
I'll try the toothpaste with a brush ... peny is definitly too tight for my fingers (no pun intended ... promise).
That's the theory, I think it could help, but I haven't tried it on the Penelope v4 Clear Tank because I haven't received it yet.
Been a while since I was on, but I wanted to stop by and post pics of a coil I have been using with the T1 and now with the T2. Lots of flavor, fairly easy after you make it a few times, and lots of clouds. It's a Vertical Dual that draws air THROUGH the coil instead of around it. I had to remove the long post from the negative side to mount, but its an easy modification (unscrew and store safely).
The coil is Dual 28g, 7 wraps at .6 Ohms. I use a jig made from a drill bit that fits snugly into the air hole and I coil it right on the atomizer.
Coil made ready to test.
Reassembled to test for hot spots.
Disassembled to insert wick. You can do this while it is assembled, but this is much easier.
Insert wick between coil and positive post.
Fold one leg around the bottom of the chamber, make sure it stays in contact with the coil. Do Not pack cotton in, keep it as loose as you can for good juice flow.
Fold other leg around, make sure it comes high enough to cover wick channels.
Gives great flavor and clouds as well as lung hit air flow.
The coil is Dual 28g, 7 wraps at .6 Ohms. I use a jig made from a drill bit that fits snugly into the air hole and I coil it right on the atomizer.
Insert wick between coil and positive post.
Gives great flavor and clouds as well as lung hit air flow.
VERY interesting Darkreign. I'm putting aside my dripper and taking apart my tilemahos to try this right now.
Before I do any damage, how exactly did you remove the long post from the negative post?
Apologies Thanasis, where would be the best place to post this?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Sent from my SAMSUNG-SM-N900A using Tapatalk
Soul, I carefully unscrewed the post using needle nose pliers. Mine are dipped in rubber so no marks, but regardless, the post is screwed in so removal isn't complicated. And the wire retaining screw uses the same thread pitch.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Sent from my SAMSUNG-SM-N900A using Tapatalk
Thanks that is what I thought as well. I've been trying carefully with my regular pliers but it seems it is screwed in quite well.
Use your left hand and keep the negative post with pliers, take a towel on your right hand, keep the negative base by its cuts and do a strong and quick turn Seek
You want it screwed in pretty tight, because when it's not it might come apart when removing the base from the deck.
Sent from my Nexus 6 using Tapatalk
And here I am waiting to purchase a Pen-4 only when it's clear tanks are available! Gotta see ma juice ya know
You just need to pull the trigger Q, the P4 is an awesome atty, it goes to work with me every day, I absolutely love the little guyAnd here I am waiting to purchase a Pen-4 only when it's clear tanks are available! Gotta see ma juice ya know
THE WGU CLUB
- Status
