GGTS + Odysseus missing piece
- Thread starter ChuckP
- Start date
- th_trl_thread_readers 0
- Status
You will need to take of the connector and Stealth cap will screw on your telescope tube. Have you tried that?
you posted just before me. I have that collector tank but the Odysseus doesn't seem to come down enough to make thread contact. It just sits above the brass top. It's not deep enough to connect, if that makes sense?
Did you try both threaded ends on stealth cap with vaseline? But dont force it.
You can take off your top cap and use the Rethreader and 901-510 adapter if you have one. You can also use a 510-510 shorty and 510-510 regular adapters if you plan to use your top cap.
Edit to add: LOL blondie
Let me elaborate a little... If you want the shortest possible setup, use your Stealth cap instead of the connector/collector tank. If you want to keep the airflow control feature and have the shortest possible setup, use the Rethreader and a 901-510 adapter.
So with the 510/901 and 901/510 it will make it rise through the collector tank to the Odysseus? Apparently the Stealth Cap and Telescopic barrel are not the same threads on this. There's a video VapeGirl did on the GGStealth discussing the threads on the SS being different.
I'm having the same issues using my telescope with the SS stealth cap. However, if I turn the telescope the "wrong" way (shorter threads in the bottom tube), then it works. Can you try it to see if it will work for you?
Edit to add: Is your ssggts a low number, under #300? If so, PM Bruce and he will take care of you.
Last edited:
I'm not sure I understand correctly... Does it screw all the way in but you can almost see the bottom thread?
As long as you are able to turn your telescope the other way and screw it into your stealth cap, you can at least use your ODY the right way. It just something you will do until you receive the new telescope. I know it not going to look as perfect as you want it to for a few days but at least you'll be able to fully enjoy your ODY.
Like has already been posted...remove the connector in the picture. Screw on the collector tank and then....
The Ody will sit on top of the end cap and won't connect to anything unless you either:
Stack adapters
Make a one piece adapter
Either way, it will look like this and THEN you attach the Ody
And Chuck, in case you haven't seen this video... Imeo has made a new ODY base specifically for GG users. It will screw into the top of the collector tank (on the threads where you top cap goes now) and you won't need any adapters either. This should become available in a couple of weeks hopefully.
Thank you all so much! I'll contact Bruce and inform him I have a first 300 run GGTS. I'll purchase this new base when it arrives.
Can someone provide the URL for the threaders? I looked at COV under parts, then under adapters and could not locate them?
Can someone provide the URL for the threaders? I looked at COV under parts, then under adapters and could not locate them?
- Status
