-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
Giveaway - Wotofo Profile RDTA, 3 Winners
- Thread starter vapbig
- Start date
- th_trl_thread_readers 0
-
- Tags
- giveaway healthcabin wotofo
- Status
1.
Cool design. And I like the versatility of the deck with options for single coil, dual coil and mesh.
Cool design. And I like the versatility of the deck with options for single coil, dual coil and mesh.
1. Very innovative juice distribution system, I also like the ability to switch between mesh and regular coils - very very interesting decision. Would be nice to try it.
Post #1
Anyway, having a 6.2ml capacity would sure be great! The Kylin M RTA only holds 4.5ml with the Bubble Glass Tube. Having 4 Stainless Steel Wires to feed the wicking looks like another interesting (but potentially troublesome) design. Back to the days of constantly Tilting to Vape.
And I love the red Resin Drip Tip that's accented with a silvery metal band on the Black Profile RDTA, which is the one I would select.
Having the same Side Airflow as the Profile RDA like it does should pretty much make it leak-proof, unless maybe laid on a side for too long. Plus having the addition of Clapton mesh is interesting indeed! The reviewer I watched says it works great at 75W. He said it's even better than the included nexMESH. For most of my other atomizers, I'm using 0.9mm x 0.1mm Flat Wire now, so it's also great that the Profile RDTA can also handle Flat Wire in both Single Coil and Dual Coils, too. With the 4 Stainless Steel Wires feeding the juice from the bottom, the coils are up top in a shallow top section and very close to the Drip Tip, much like the Profile RDA, if not exactly the same, so the flavor should be just as great as either Profile RDA, if not better by making it more shallow, if they did. To round it all out into a complete atomizer package, the Profile RDTA can also be converted to an RDA with the bottom screw-on piece that's included in the box, and it even comes with a Squonk pin.
x
Way to go, Wotofo and Mr.JustRight1!!!
The only downside, and it's not much of one, is that the Top Cap has to be removed to fill the RDTA tank, but as said, that's a fairly minor thing. It doesn't look like they forgot much of anything and included lots of new and thoughtful features in this design.
The only thing that I don't see mentioned is a Bubble Glass Tube for it in RDTA mode. Having that, though without the protective metal frame in another bottom piece, if the frame's cage glass cover can't be removed, the juice capacity could be 8ml or more. It might look funky with a Bubble Glass Tube on the bottom of the 52.7mm tall atomizer (52.7mm without the Drip Tip or 510), but I bet it would sell. And I love that it's a 25mm diameter.
x
All of this for only $39.99.
Do you get the idea that I like this one a lot?
I have an original Profile RDA and a Profile v1.5, both on Squonk Mods, and a Kylin M RTA because I just love Mesh! I don't use nexMESH, but instead I use Vandy Vape 200mesh wire to make my own. I trim it to the same length and width by using a nexMESH strip of the size I need as a guide. The original Profile RDA and the v1.5 use different widths of nexMESH and the Kylin M RTA uses the original size, but I can make my coils for all three. The Profile RDTA uses the same nexMESH width as the Profile v1.5 RDA, so I'd still be set there. Funny that a flat strip of mesh is called a wire or a coil. It's a punched sheet of metal used in an arc.
Having the same Side Airflow as the Profile RDA like it does should pretty much make it leak-proof, unless maybe laid on a side for too long. Plus having the addition of Clapton mesh is interesting indeed! The reviewer I watched says it works great at 75W. He said it's even better than the included nexMESH. For most of my other atomizers, I'm using 0.9mm x 0.1mm Flat Wire now, so it's also great that the Profile RDTA can also handle Flat Wire in both Single Coil and Dual Coils, too. With the 4 Stainless Steel Wires feeding the juice from the bottom, the coils are up top in a shallow top section and very close to the Drip Tip, much like the Profile RDA, if not exactly the same, so the flavor should be just as great as either Profile RDA, if not better by making it more shallow, if they did. To round it all out into a complete atomizer package, the Profile RDTA can also be converted to an RDA with the bottom screw-on piece that's included in the box, and it even comes with a Squonk pin.
x
Way to go, Wotofo and Mr.JustRight1!!!
The only thing that I don't see mentioned is a Bubble Glass Tube for it in RDTA mode. Having that, though without the protective metal frame in another bottom piece, if the frame's cage glass cover can't be removed, the juice capacity could be 8ml or more. It might look funky with a Bubble Glass Tube on the bottom of the 52.7mm tall atomizer (52.7mm without the Drip Tip or 510), but I bet it would sell. And I love that it's a 25mm diameter.
x
All of this for only $39.99.
- Status
Similar threads
- Locked
