DV has the Lr Go go dual coil cartos but personaly I like the regular cartos best but others love the duals.
Go-Go Specific: Thread for All things Go Go
- Thread starter Devonmoonshire
- Start date
- th_trl_thread_readers 0
- Status
DV has the Lr Go go dual coil cartos but personaly I like the regular cartos best but others love the duals.
They have the clear plastic tube and I had problems with mine cracking due to the juice I was using so mine didn't last as long but maybe someone that uses them will chime in.
I know that on the polycarbonate tanks that cinnamon killed those tanks. I had some Clearomizers I used for a while with my Mega Ego they seemed fine but more fragile than the steel ones. I know they won't be as durable for those whom put them in their pocket.
Unfortunately, not even close. I tried them, they were OK i guess as far as vape. I just got tired of constantly topping them off to keep the top coil saturated and breaking them in my pockets...lol. The ones that survived breaking only lasted 3 to 4 days at the most. I didn't like them good enough to buy more.
Marty
Just checked my Go-Go carts....I have about 20 black ones left. They came in about 2.7 OHMS. I have had a carto that lasted 3 months. Marty maybe that batch from that supplier was off? I know it sounds like you ordered a bunch too!? But have you tried ordering from a different supplier? I have not heard of that high an Ohm rating on a Go-Go yet..4.2....Wow!!!
well you can get a 510 to GoGo adapter and vape at 7 volts now....lol
well you can get a 510 to GoGo adapter and vape at 7 volts now....lol
If the CE4's are 510 connectors than either a device with a 510 connection can be used or any adapter that allows the use of 510 attys and cartos will work, including Go-Go to 510 adapters. You would have to use a Go-Go to 510 adapter with a Go-Go to connect it to any other 510 atty,carto or other feeding system that itself is a 510 connection.
Hope that's clear?
NC-FOG the carts that you got the high reading from were they black or stainless
Yes, it is clear PaulieD. I do know this yet with the way the CE4 is constructed at the battery end I am not sure if a GOG0/510 connector would raise it high enough for the flange to be able to screw it on. Hope this makes sense.
Thank you.
Thank you.
madmach
I know you are addressing NC-FOG. The ones I got my readings on yesterday were black. I do not see how that would make any difference as far as the color goes unless one color is from one supplier and the other from another.
I know you are addressing NC-FOG. The ones I got my readings on yesterday were black. I do not see how that would make any difference as far as the color goes unless one color is from one supplier and the other from another.
The GoGo to Ego may be a different story. You might want to ask Eric at Discount Vapers.
Possibly someone here might know. I found it was much easier to go ego to gogo than gogo to ego. The adapters MAY fit ego...the gogo to 510 adapters I believe.
The carts I got the readings from were from both black and stainless(11black/34stainless). They were purchased about 3mos. apart from 2 different vendors. The thing is I can't seem to remember which particular ones I go where. PaulieD, Good idea! I have a friend who vapes at 6volts who is getting some(probably all)of the carts to try out. When I first started checking the ohms I though maybe my meter(Fieldpiece)was acting up, so I got the Fluke, same reading.
Some of the best dripping I've done has been done with the Go-Carts. I would take one and cut it to where it is flush with the cone, ream the cut edge, snatch out the tube and filler with needle nose pliers, pop in a drip tip, 4 to 6 drops of your favorite juice, Great!!!
Marty
Some of the best dripping I've done has been done with the Go-Carts. I would take one and cut it to where it is flush with the cone, ream the cut edge, snatch out the tube and filler with needle nose pliers, pop in a drip tip, 4 to 6 drops of your favorite juice, Great!!!
Marty
Last edited:
You could also put a GoGo adapter on your 510 device and get a Cyclone tank...for Go-Go's. Then maybe your device allows battery stacking and voila...full use of them high ohm cartos with very little work.
You are deducting the internal resistance of the meter itself from the readings you get right?
I.E. When I set my meter to the lowest ohms setting (which is 200) and then touch the leads together I get .7 ohms. This.7 is the internal resistance of the meter itself. I then check the cartos which came in at 3.4 ohms...then subtract .7 from that to arrive at 2.7 ohms for the carto itself.
I.E. When I set my meter to the lowest ohms setting (which is 200) and then touch the leads together I get .7 ohms. This.7 is the internal resistance of the meter itself. I then check the cartos which came in at 3.4 ohms...then subtract .7 from that to arrive at 2.7 ohms for the carto itself.
The reason i asked i got some stainless one a while back and just got around too trying them and the taste was way off so i put a meter on them ohms were high on them check the black ones i have and they are fine
I'm still using my gogo with the punched cart and tank mod. Its been very easy to use however I'm noticing that the vapor isnt the same as it was when i first started. I get vapor but its not very strong and it doesnt give me the same throat hit. The juice is still the wow apple from vapor4life.
Going to try new carto's and see if it makes a difference but sometimes I have to go puff an analog to get satisfied.
ps.....the cartos im using are the punched cartos from discount vapors.
Well it is not a big deal i only had 10 of them so i well just strip the filler out of them and use the in the one that work good.But as for the gogo that is all that i use these days just can not beat the no fuss with them.I did try a 510 tank i got from dv but it is not the same as the try and true use of the gogo.
- Status
Similar threads
