Go-Go Specific: Thread for All things Go Go

Status
Not open for further replies.

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
I took a gogo and used a bench grinder to bring it down to bare metal and then blued it with Brownells gun bluing. For comparison, the slide on the Hungarian PPK is perfect bluing. What looks faded is really glare. The gogo came out pretty good but not 100%. I'd like to see them hot dip the cone and battery case and give a deep gun blue. I'll bet they'd sell.
 

Attachments

  • boboalbum1.jpg
    boboalbum1.jpg
    19.5 KB · Views: 89
Last edited:

Kobudo

Super Member
ECF Veteran
Jan 16, 2010
399
18
Evansville, IN
Hey all, came up with a variant of les017's clean/repack method tonight, that makes getting the filler back in super easy. :) The only change I made was to cut the iller into 1/4" to 3/8" wide strips, and starting from the center of the strip, push down between the center straw and side of the cart with a straightened paper clip. Wiggle one side down, then the other, so it wraps evenly around the center straw. Push down towards the bottom, and repeat with the remaining strips. Got the whole thing back in, flush with the top of the straw this way.

I don't know if anyone has tried this or mentioned it yet, but I cleaned a cart tonight using this method and held 2.5ml of liquid filling with a syringe. I also ditched the inner wrap and dry burned before re-inserting the "rinsed and dried" filler.
 

txtumbleweed

Resting In Peace
ECF Veteran
Dec 7, 2009
6,418
9,433
Walla Walla
Yes same manufacture , so they will be gogo campatable , you would be blown away by how many manufactures there actually are. And okay billb maybe I will skip the logo.There are just so many new things out there, kanger is making really nice stuff these days, and I wont be like other sellers and try to rename stuff just to make it sound exclusive. although i like the bloog maxfusion , the new dripper carto's from nhaler are exactly the same and they are kanger, so is that where the maxxfusion is being made, it is really hard to try and get the best there is , I have bought so many samples over the past couple of months it is getting expensive. And believe me i cant even count the number of companies making the same exact items.

I know there are alot of similar ones that also use the Go-go name and can be confusing vgo, igo, go-go V-1 V-2 V-3 and echo are all similar. I was going to buy 10 at one time but could never get the straight scoop and trying to correspond with the Chinese can be difficult at best. Did you say you are dealing with Kanger?
 

johnnybass

Unregistered Supplier
ECF Veteran
Apr 9, 2010
246
20
61
nevada USA
www.coolvapes.com
I am waiting on an IGO sample from kanger, the GOGO samples I have are from banktown trading, I am hoping these are the right ones , i have pulled apart a cartomizer and it is bottom coil and i don't see any difference from the cigeasy gogo.and they have them in both gold band and chrome just like nhaler and cigeasy so I think this is the right one.
 

txtumbleweed

Resting In Peace
ECF Veteran
Dec 7, 2009
6,418
9,433
Walla Walla
I am waiting on an IGO sample from kanger, the GOGO samples I have are from banktown trading, I am hoping these are the right ones , i have pulled apart a cartomizer and it is bottom coil and i don't see any difference from the cigeasy gogo.and they have them in both gold band and chrome just like nhaler and cigeasy so I think this is the right one.

That is interesting and they have the same threads as the Go-Go?
 

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
I am waiting on an IGO sample from kanger, the GOGO samples I have are from banktown trading, I am hoping these are the right ones , i have pulled apart a cartomizer and it is bottom coil and i don't see any difference from the cigeasy gogo.and they have them in both gold band and chrome just like nhaler and cigeasy so I think this is the right one.

The Biggest question is not whether or not the Cartomizers you got "Look Like" the same, the question is "Do the Go Go Samples you got fit the Cigeasy Go Go?"

Nate aka Darth Vapor

 

Devonmoonshire

Vaping Master
ECF Veteran
Verified Member
Mar 22, 2011
6,750
7,969
San Diego, CA
Okay, you said that you see no difference in the Cigeasy gogo, now that tells me that you have a Cigeasy Go Go to compare them to. Do the parts in question actually fit the Cigeasy Go Go and Vise Versa.

I am very very suspicious as to whether you are being scammed or not, because Kanger is the manufacturer of the Go Go. Pretty much everyone who has either a Cigeasy or NHaler Go Go is a little suspicious of any company that claims to be making a "Go Go" as there is a huge possibility that they could be knock offs that are of a lower quality.

I would really hate to see you order a bunch of these only to find out that they are not the real deal.

Nate aka Darth Vapor

 

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
quick question...do u guys wrap the go carts with foil before putting inside the oven to dry?

No. I put a cookie sheet on the middle rack in the oven. Spread a layer of tinfoil on the cookie sheet and stand the gocarts on end with the battery side down on the tin foil. I make sure they are separated from each other. Bake at 250 to 300 degrees for an hour. Let them cool and remove them.
 

johnnybass

Unregistered Supplier
ECF Veteran
Apr 9, 2010
246
20
61
nevada USA
www.coolvapes.com
okay to clarify , the samples i got from the one trading company are a perfect match, and the batteries under no load measure at 4.2 volts and are 1300 mah, i should have my sample from kanger this week, I have about 6 different ones coming from them. and I have compared my sample so far to date directly to a nhaler model.I know what you are saying as far as being scammed , I have spent the past couple of months with my pulse on the ECF , trying to see the bigger demand and try to help out so to say with a higher demand product.I have had samples from many suppliers to date , there is one that I personally really like and that is the ECHO , and I might carry that one as well , that supplier was quick to respond and very fast in delivery to me. I know it is hard to separate the good ones from the knock off's. I wish I could just talk to Drew at nhaler and get the skinny on who to talk to at kanger to get it simplified .they list a gogov2 and a gogov3 both those are on there way to me as we speak
 
Last edited:

txtumbleweed

Resting In Peace
ECF Veteran
Dec 7, 2009
6,418
9,433
Walla Walla
okay to clarify , the samples i got from the one trading company are a perfect match, and the batteries under no load measure at 4.2 volts and are 1300 mah, i should have my sample from kanger this week, there site is difficult to tell the difference between all their models , so I have about 6 different ones coming from them. and I have compared my sample so far to date directly to a nhaler model.I know what you are saying as far as being scammed , I have spent the past couple of months with my pulse on the ECF , trying to see the bigger demand and try to help out so to say with a higher demand product.I have had samples from many suppliers to date , there is one that I personally really like and that is the ECHO , and I might carry that one as well , that supplier was quick to respond and very fast in delivery to me. I know it is hard to separate the good ones from the knock off's. I wish I could just talk to Drew at nhaler and get the skinny on who to talk to over there to get it simplified .

Doesn't the Echo use an automatic battery? It does look good in the pictures. I heard Drew tried it when he was in China but chose the iGo instead. I don't know his reasons for making the choice. How does it vape?
 
Status
Not open for further replies.

Users who are viewing this thread