Goodejuice 808D XL Clearomizers

[GuyInAZ]

Well..... I thought I'd give clearomizers a try. Got these from Goodejuice. Terrible, taste like burnt wick and vape was lousy

 

[dormouse]

What PG/VG did you put in them? And I wouldn't buy them there - they don't even say exactly what clearomizers and rev they are. If they are CE2 those often need the inner seal modded or reversed to wick right. And here's a hint about ecig stuff - if it looks like the coolest thing ever it may still work like crap or require mods or tinkering to work, especially if it's clear.

And I recommend not ever buying cartos without knowing exactly what they are and what ohms they are. On a slim ecig you should be using no lower than 2.5 ohms. Anything lower is for fat batteries 450mah+ and mods.

And clearomizers work best with 30% VG or less

 

[BluSwatch]

Noooo, say it isn't so! I think I have 510 CE2s coming from them .....

 

[dormouse]

And you may need to tinker with them. Some people adore them. But most of those who adore them are willing to mess with the inner seal.

Read some of this - see the second post about how to enlarge the notches in the inenr seal. And I think some just flip the inner sel.
http://www.e-cigarette-forum.com/fo...-ce2-mod-eliminate-dreaded-slug-o-liqued.html

Some other suggestions
Problems with xl ce2 fluxomizers' atty coil (and wicking) burning - V2 Forum

And more
http://www.e-cigarette-forum.com/forum/gotvapes/237204-new-ce2-wierd-burnt-taste.html

etc

 

[BluSwatch]

I didn't order XL ones, and I did see a vid where they raised the top seal/plate a bit ....... I can do that much. I hope they work, my Boge cartos are getting to be a pain.

 

[GuyInAZ]

What PG/VG did you put in them? And I wouldn't buy them there - they don't even say exactly what clearomizers and rev they are. If they are CE2 those often need the inner seal modded or reversed to wick right. And here's a hint about ecig stuff - if it looks like the coolest thing ever it may still work like crap or require mods or tinkering to work, especially if it's clear.

And I recommend not ever buying cartos without knowing exactly what they are and what ohms they are. On a slim ecig you should be using no lower than 2.5 ohms. Anything lower is for fat batteries 450mah+ and mods.

And clearomizers work best with 30% VG or less

Don't know PG/VG, Halo Prime 15 and they won't reveal the ratio. Doesn't say how many ohms.

 

[dormouse]

Read the threads I posted above which include ways people make them work

 

[GuyInAZ]

And you may need to tinker with them. Some people adore them. But most of those who adore them are willing to mess with the inner seal.

Read some of this - see the second post about how to enlarge the notches in the inenr seal. And I think some just flip the inner sel.
http://www.e-cigarette-forum.com/fo...-ce2-mod-eliminate-dreaded-slug-o-liqued.html

Some other suggestions
Problems with xl ce2 fluxomizers' atty coil (and wicking) burning - V2 Forum

And more
http://www.e-cigarette-forum.com/forum/gotvapes/237204-new-ce2-wierd-burnt-taste.html

etc

Thanks but that's a lot of research I would have to do and they still might not work.
$13 and 6 ml of good juice wasted, lesson learned.

 

[hairball]

You'll have to remove the inner silicone ceramic cup seal and cut the wick openings bigger to allow for juice to wick faster. That's the only way these things work correctly.

 

[GuyInAZ]

Update: Got a call from Nick Orlando @ Goodejuice. Gave me some tips on using the clearomizers and is sending me a pack of 5 blank 808 cartomizers to make up for it. Thanks Nick

 

[dormouse]

That's nice of him since it's not his fault most clear cartos have problems

 

[kittiemarie2003]

Great! Im glad he helped!

 

[GuyInAZ]

Ya,he actually called me on the phone and shipped the blank cartos 5 minutes after our phone conversation.
Goodejuice is awesome