- Status
If i were a guessing man, I would assume the issue is wthin your switch. As the button being brass is going pocess the lowest resistance thus heating up faster. Disassemble the switch, examine and clean contact points and spring, even if brand new, as partcles may have settled.
I have heard of the issue with other high end mechs but not with the PAPS. I chain vape all of mine and they hit hard, never having this issue.
I have heard of the issue with other high end mechs but not with the PAPS. I chain vape all of mine and they hit hard, never having this issue.
Mine has no spring....
I was wondering when I got it if I was supposed to have one, but thought nothing of it since it worked so well. I use aw imr nipple top batteries exclusively...350 and 650 modes. Should there be a spring in there? All there is in the bottom cap is the switch and a nut it screws into inside of the polished ss cap.
I was wondering when I got it if I was supposed to have one, but thought nothing of it since it worked so well. I use aw imr nipple top batteries exclusively...350 and 650 modes. Should there be a spring in there? All there is in the bottom cap is the switch and a nut it screws into inside of the polished ss cap.
Unscrew that middle nut and the button with pin attached will fallout the bottom revealing a spring.
Yeah, just did it, no spring. :/ And the first time I took it apart when I got it, there wasn't one. I was surprised to not see one at first, but didn't say anything because of the quality of the device and how well it was working, and still is working. The button has always felt a little wonky, but it's my first bottom fire button mod. I guess I should talk to perseas about this?
Com is right. The nut its a reverse thread also. The spring is a beech to find in carpet, so don't let it shoot across the room. Order spares also.
There is a spring guaranteed. Otherwise the button would not recoil. If you don't have one now....check the carpet. The switches are all tested before shipping.
The spring is inside the switch providing resistance to the button for engagement and disengagement.
The spring is inside the switch providing resistance to the button for engagement and disengagement.
Last edited:
Man I really can't see how I lost that spring. I unscrewed everything on my desk, under an observation light, without anything else around. I'll talk to Pers and see what they can do, but would a spring from say, my Natural, fit? going to test this now, I want to see how much better it will make this PAPS.
Doubt it. PAPS springs are much more delicate for the best and smoothest operation. He also has perfected the resistance within the switch to include the spring as one of the variables . I have some for spares I think and can send one out potentially. Did you unscrew the center nut so the switch was in 3 pieces? Button, button housing and locking ring?
Last edited:
Yeah, many times now...no springy. The same thing I did when it first arrived.
I swear there wasn't a spring but I believe that if they're tested before leaving the shop (and I'm sure they are) that I was at fault and somehow lost it. Bad part is, I vacuumed yesterday, so there is no chance of finding it if it WAS on my floor.
I swear there wasn't a spring but I believe that if they're tested before leaving the shop (and I'm sure they are) that I was at fault and somehow lost it. Bad part is, I vacuumed yesterday, so there is no chance of finding it if it WAS on my floor.
I'll send you a replacement part for the switch, send me please a pm with your address detail. These parts are under production right now, in 15 days I'll have hem ready.
Yeah, many times now...no springy. The same thing I did when it first arrived.
I swear there wasn't a spring but I believe that if they're tested before leaving the shop (and I'm sure they are) that I was at fault and somehow lost it. Bad part is, I vacuumed yesterday, so there is no chance of finding it if it WAS on my floor.
Give me your order number mate, I'll send you a new spring, the units are checked before shipping, but a human error or omission once in a while could happen.
Perseas, my order # was 2690. I really appreciate your offer pers, just more proof of your amazing customer service.
As I said, it works great right now, which is why I didn't immediately say something right away. Don't think I would have honestly known a spring was missing until someone said it.
Thank you again sir.
edit - Will be ordering a few springs and another switch after I get paid next week. Can't hurt to have extras, should have went ahead and got them in the first place!
As I said, it works great right now, which is why I didn't immediately say something right away. Don't think I would have honestly known a spring was missing until someone said it.
Thank you again sir.
edit - Will be ordering a few springs and another switch after I get paid next week. Can't hurt to have extras, should have went ahead and got them in the first place!
Last edited:
Already have my shipping invoice for the spring...how much better can a company get in terms of customer service?
Truly amazed...
Truly amazed...
Perseas makes all other companies look like they simply want your money. Honestly Perseas has the patience a lot of people lack to handle his customers and take care of them. He truly doesn't just want your money, he wants you to be happy, he wants to take care of you and that to me is more important than the product itself. Just so happens the products he sells are of the same caliber he is. Match made in heaven.
Perseas=King
-TCAD
Perseas=King
-TCAD
Welp my package arrived today, and I'm currently polishing everything so I can really see this baby sparkle and work CORRECTLY now that I have the spring.
I am mainly writing this though, because when I had a problem (possibly my own fault) Perseas made it his DUTY to fix it for me. He, within a few hours after posting here, had a DHL tracking number for me with a new spring on the way! Well today it got here, and I know springs aren't expensive or anything....I mean it's just a spring. When I opened the package, there were 4 springs in there. I am continually amazed by this man and his company.
As I said before, it was just a few springs, but I have NEVER had a company do something like this for me before, and it completely made my day.
Perseas, you are the absolute BEST vendor I have EVER bought anything from. It's no wonder why your fans love you so much...it's hard not to!
I am mainly writing this though, because when I had a problem (possibly my own fault) Perseas made it his DUTY to fix it for me. He, within a few hours after posting here, had a DHL tracking number for me with a new spring on the way! Well today it got here, and I know springs aren't expensive or anything....I mean it's just a spring. When I opened the package, there were 4 springs in there. I am continually amazed by this man and his company.
As I said before, it was just a few springs, but I have NEVER had a company do something like this for me before, and it completely made my day.
Perseas, you are the absolute BEST vendor I have EVER bought anything from. It's no wonder why your fans love you so much...it's hard not to!
A new batch of SS GP Spheroid v2 atomizers with brushed and polished finish is coming on Saturday 20 April at 09:00 p.m. Local Time in Athens, Hellas.
The orders will be posted from Monday 22 April till Wednesday 24 April.
The tracking numbers will be sent on the shipment.day by DHL.
The orders will be posted from Monday 22 April till Wednesday 24 April.
The tracking numbers will be sent on the shipment.day by DHL.
Last edited:
- Status
Similar threads
- Locked
