GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2
- Thread starter perseas
- Start date
- th_trl_thread_readers 0
- Status
I'm mature enough to not be overly jealous by this....just don't tell me how many spheroids or piccolos you own.Nice mail day layout there bro! Here's mine:
My GP setups today. A little DYI Ecto Cooler in the 350, DYI Peach in the 500 V2.5 and some nice GVC in the 500 V3 with new Heron.
I think it's Newf.....He better not be taking any of them for granted
Read vapourarts twitter. As soon as they send out all pre-orders, they will be releasing the remaining V3 on their web for the people like me that missed out.
Oh what a happy day. Gp vape mail puts me in such a good mood.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Thanks Idaho for the Spheroid v3 update and teaser. I was already in the market for another so I had might as well wait and make it a v3. 
Experimenting with the adjustable draw on the Heron. I found 3 holes a little too airy, 2 holes a smidge too airy, 1 hole a little too tight and 1.5 holes perfect. How simple and easy to find the perfect draw for your own build 
Every time I see the insignia it reminds me of this
but thats as beautiful as ur stingray setup trusound
Sent from my Nexus 5 using Tapatalk
Our insignia:
Comes from:
With Perseas blessing, I was honored and delighted to receive and test the prototype version of the upcoming GP Spheroid V3 and am excited to share a few pictures and thoughts.
First of all, I tip my hat to Perseas for listening to the many GP Fans that loved the Spheroid but, wanted a bit more airflow to go along with it. Many including myself would rate the Spheroid as the top atomizer in our vaping world. Now, the rest that needed more air will make it theirs.
At first glance, you will notice there are two very adequate air holes on the exterior base. I will tell you that with the new edition of the air holes there is plenty of air circulating up through the chimney to keep lung hitters alike with a permanent smile.
Breaking the Spheroid down and comparatively inspecting it with the previous version, I noticed a few changes. One of them was the taller air chamber rise on the top of the base under the coil and wick. I see benefit in that any juice on the deck from over wicking or over filling will less likely drain into the base. I also suspect being closer to the coil will allow a better flavored vape(this seems impossible as it is awesome already).
I remember Perseas often instructing builders to keep their coil/wick 1mm-1.5mm from the center hole for a better experience.
When I received the V3 I immediately took it apart to inspect...I struggled with the top cap as it would not unscrew. Finally, after staring at it and willing it off it hit me. It is press fitted with an oring! I must say it is a PERFECT fit! I love it!
I find it is quite easy to push it off from the bottom bell. The o-ring size is perfect and the tolerance fit could not be better. Most of us Spheroid lovers know that on the previous version the top cap often took some work to unscrew. Now it installs and removes like a dream.
The vapor production is incredible and the airflow is amazing. I can not wait for the release.
I, once again am ever impressed by Team GP as all of their devices move forward in advanced design. I also find it very refreshing that Perseas cares enough to always listen to his fans trying to satisfy every group of vapors and he nails it every time.
GP you nailed it with the V3. Thank you for thinking of us. Love you Brother!
*Note - the prototype shown may not depict the final design or release. Photos are property of Idaholandho and GP.
honestly, I am not sure how anyone could add a single thing to that post.
superb oh, except, please send me one
All pre orders have been sent. If we missed any, we'll send it tomorrow, but I believe we send them all.
We are going to Sofia the day after tomorrow to finalise the design of GP Spheroid v3. The unit will retain the bottom air holes of v2, unlike the prototype which Idahobro showed a few post before, because we found the flavour to be somewhat muted compared to v2. The small size of the atty doesn't permit us to make an AFC ring. There is another change not pictured in the prototype and I will post about when we finish. The 510 bottom cap is threaded without the external lip of v2, the same as the shown prototype.
We are going to Sofia the day after tomorrow to finalise the design of GP Spheroid v3. The unit will retain the bottom air holes of v2, unlike the prototype which Idahobro showed a few post before, because we found the flavour to be somewhat muted compared to v2. The small size of the atty doesn't permit us to make an AFC ring. There is another change not pictured in the prototype and I will post about when we finish. The 510 bottom cap is threaded without the external lip of v2, the same as the shown prototype.
Verrrry good vape mail day.
V3 ss
650 v3 lux
Heron
X convertor
pnb tool
fluff
4 Sony vtc5's
But I DO need a bit of HELP. I opened the package and am in awe. So I want to build the heron and I start to do a take down and cleaning. I open up the tank from the bottom and inside is the "cap" where the wick goes up through. How do I get that out? I do not want to force anything as I have been extremely gentle in the little I have touched it. Am I missing something? Thanks
V3 ss
650 v3 lux
Heron
X convertor
pnb tool
fluff
4 Sony vtc5's
But I DO need a bit of HELP. I opened the package and am in awe. So I want to build the heron and I start to do a take down and cleaning. I open up the tank from the bottom and inside is the "cap" where the wick goes up through. How do I get that out? I do not want to force anything as I have been extremely gentle in the little I have touched it. Am I missing something? Thanks
The cap is held in by an oring so I was able to slowly get it out with my nail. You can also use a small screw driver to take it out from the hole.
Sent from my Galaxy Note 3 using Tapatalk 4
- Status
Similar threads
- Locked
- Sticky
- Locked
