Hana connection problem

[JetEuphoria]

My hana 30 clone says: check atomizer at my Aerotank. At my Lemo it says: shorted. <br />
<br />
My Aerotank works well at another device. Cannot check my Lemo at another device because of the low ohm. <br />
<br />
Can anyone help?<br />
<br />
Thx in advance. <br />
<br />
Regards, Jet<br/>

 

[Smann245]

Check the positive pin insulator on the hana. Since the pin is fixed its easy to over tighten an atty and cause the pin to short against the ground. The best modification you can do to a hana type box is replace the stock connector with a fatdaddyvapes 510. You might be able to just pry the pos pin up a little and get it working.

 

[JetEuphoria]

Check the positive pin insulator on the hana. Since the pin is fixed its easy to over tighten an atty and cause the pin to short against the ground. The best modification you can do to a hana type box is replace the stock connector with a fatdaddyvapes 510. You might be able to just pry the pos pin up a little and get it working.

It won't and the ring become loose and I cannot get to tightened it right.