good to know and consider, for myself I actually ordered the SS version of the hcigar Nemesis. So much to think about before it actually gets here! If only USPS actually worked as intended lol.
Hcigar nemi clone.... where?
- Thread starter Jonathan Rizo
- Start date
- th_trl_thread_readers 0
- Status
good to know and consider, for myself I actually ordered the SS version of the hcigar Nemesis. So much to think about before it actually gets here! If only USPS actually worked as intended lol.
All my nemmie worked out of the box. I did the mods later to fine tune operation. Inspired by severe FT SS nemmy crunch.
Thanks to everyone who posted in this thread, got my vape mail today (nemesis clone and magnet and switch upgrade) today and holy hell, I'm about to throw my genuine 69 in the trash! The difference is phenomenal, literally unbelievable for clone vs genuine. Goodbye genuine mods, hello clone world! Will probably stay with genuine attys but man what a difference in power!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Obviously your order has already been made and received, BUT I just had to ask. People speak so highly of the caravela and don't get me wrong, I LOVE the looks of it, and the button. Even with a flat top 650 batt it won't screw all the way together....and no atomizer except my kayfun 3.1 and omega v2 screw down flush. So the variations of it are VERY limited. Just a little peeve I still can't get over...why make a mod that barely can fit a flat top LOL
So is there any kit that would make it fit my atty's in a hybrid mode or any tips even for putting this evil metal thing together?
*Pics of top and bottom for help*
Top is adjustable with then pin.
The bottom button however can't be changed. If I loosen it any it just unscrews when I vape and falls apart lol
So is there any kit that would make it fit my atty's in a hybrid mode or any tips even for putting this evil metal thing together?
*Pics of top and bottom for help*
Top is adjustable with then pin.
The bottom button however can't be changed. If I loosen it any it just unscrews when I vape and falls apart lol
Last edited:
Glad to hear that you like your new Nemmy! Post a picture of what your setup looks like!
That 69 is about to become a decoration lol! I can say that a 6/7 wrap with 26g micro coil is no longer going to work on my kayfun... The wicking can not keep up hehe.
Sent from my iPhone using Tapatalk
Obviously your order has already been made and received, BUT I just had to ask. People speak so highly of the caravela and don't get me wrong, I LOVE the looks of it, and the button. Even with a flat top 650 batt it won't screw all the way together....and no atomizer except my kayfun 3.1 and omega v2 screw down flush. So the variations of it are VERY limited. Just a little peeve I still can't get over...why make a mod that barely can fit a flat top LOL
So is there any kit that would make it fit my atty's in a hybrid mode or any tips even for putting this evil metal thing together?
*Pics of top and bottom for help*
Top is adjustable with then pin.
The bottom button however can't be changed. If I loosen it any it just unscrews when I vape and falls apart lol
No idea, maybe upgrade from fat daddy? I'm thinking of ordering the vela next week when I get paid hehe. I used fatdaddyvapes for the upgrade kit on the nemesis so now I use the kick ring with no kick. Quad coil in my igo w-3 is now insane!
Sent from my iPhone using Tapatalk
Replace top pin with a dual adjustable pin(good luck)
Use nylon washers with large center hole to secure battery at negative end. Bottom cap should hold them in place.
Keep the Switch screw tight. Don't want it coming loose and shorting the Mod.
Switch screw may be spaced with a small washer, then tighten.
Take the switch to Lowes/ Home Depot / Hobby store/ etc. to locate washer that will fit.
Use nylon washers with large center hole to secure battery at negative end. Bottom cap should hold them in place.
Keep the Switch screw tight. Don't want it coming loose and shorting the Mod.
Switch screw may be spaced with a small washer, then tighten.
Take the switch to Lowes/ Home Depot / Hobby store/ etc. to locate washer that will fit.
Last edited:
To flush my ehpro and FT velas I cut some custom length pins from M4 screws. Have my first vela fitting all toppers but I need to cut some more pins cuz I bought more velas. Kind of a pain to cut those tiny pins and clean up the threads so they don't damage the nylon/delrin.
My nemesis clone should arrive tomorrow. Can anyone tell me the popular mods/tweaks to do to make this mod even better?
Definitely the button, I fired it maybe twice with the spring and it was super crunchy, did not like it at all. Put magnets in and it's a dream!
Sent from my iPhone using Tapatalk
I like magnets in the switch . Also I found original Nemmy pins and they seem to make mine hit harder.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
That's what I thought. I didn't want to just clip a new pin and it be jagged and sharp. damn, I really need to stop procrastinating and get a dremel.
After the tweaks I mentioned earlier in the thread my China nemesie work like a well oiled machine w/ small lock ring gap. A true luxury to vape.
You just adjusted it for less throw or you actually done some kind of lock ring modification?
I made half a dozen hot pins of different lengths. I used M5-0.8 bolts. Here is a ready to vape nemmie with a short throw switch:
Ordered a nemesis clone the other day, still studying up to be ready to get into the ecig mod world, so I do have a few questions about this! I tried figuring these things out but I am a bit confused 
Sorry for the noobness!
1. What does getting magnets do? What is their purpose?
2. What is the "switch upgrade/wobble switch" that is recommended for this mod? What is its purpose as well?
3. What are extended pins/fatdaddy pins? What is their purpose?
Sorry for the noobness!
1. What does getting magnets do? What is their purpose?
2. What is the "switch upgrade/wobble switch" that is recommended for this mod? What is its purpose as well?
3. What are extended pins/fatdaddy pins? What is their purpose?
IMO getting original Nemmy pins did wonders for my Nemmy clone . You do want to at least get the FD pins
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Ordered a nemesis clone the other day, still studying up to be ready to get into the ecig mod world, so I do have a few questions about this! I tried figuring these things out but I am a bit confused
Sorry for the noobness!
1. What does getting magnets do? What is their purpose?
2. What is the "switch upgrade/wobble switch" that is recommended for this mod? What is its purpose as well?
3. What are extended pins/fatdaddy pins? What is their purpose?
Magnets provide a consistent 360 degrees pressure to the button.
Magnets can be shimmed to increase button firmness.
Springs work ok if satisfactory tension but some springs cause angled button because they exert force unevenly.
Nemy deal extreme magnets were cheap and work great.
Wobble switch is result of loose switch clearances and I don't like. Many could care less if button has excess play. High end mods report 0.002" switch clearance. One of my mods measured 0.015" which is wobble switch in my book.
Different pin lengths allow different batts to fit while maintaining small lock ring gap. I like small gap. Others may not mind large gap. In some cases longer pin may be required for mod to function if batt is short and topper connector is short. There are other reasons for long pins, say if you like beauty ring, etc.
This... I ordered the pins and magnets from fat daddy and couldn't be happier. It definitely shortened the throw and made everything much smoother. It works like a dream and I'm vaping with it everyday, I've put the 69 mod in the drawer and it's been there since I got my nemi clone.
Sent from my iPhone using Tapatalk
- Status
