Heather's Heavenly Vapes - THE BIG THREAD

[Jourelem]

Right now I'm vaping P. Booty, Huntsman, H. tobacco and D. Horse. I've got nothing
going on here. The only thing that has any flavor so far is the Huntsman, and I don't
like it. I know it, and the others, will get better after steeping for a while longer, but
they have been steeping now for 12 days. The Gandolph, on the other hand, is doing a mighty fine job.

If you're not getting flavor after 12 days, then something else is going on. That's not to say you will like the flavor, but no flavor? What are you vaping it out of?

I'm vaping those on a hybrid 501/306 atomizer. My other flavors are fine on the atomizer, including
Gandy, but I'm getting no love from the others I mentioned. The P Booty may be coming around. I
detected the birth of some flavor last night.

Gandy graduated from the atomizer test scene to it's own clearo. It was a proud affair for both of
us.

I'm vapin pirates booty right now on an empiremods 901 LR atty and its great on flavor. Even tried it on a empire 510 SR atty and flavor is still amazing.

 

[MikeJA]

Received my first order today. Now I know what all the fuss was about. Gandalf really is a great vape. Haven't even tried the other flavors I ordered yet, but what a great start!

Dripping 12mg, 100% VG Gandalf with an iAtty on a Provari...wonderful. Thank you Heather! And greetings to Newnan, GA from Southern California! A co-worker of mine grew up in Newnan.

 

[gthompson]

I'm considering moving to Newnan.

 

[Jourelem]

Received my first order today. Now I know what all the fuss was about. Gandalf really is a great vape. Haven't even tried the other flavors I ordered yet, but what a great start!

Dripping 12mg, 100% VG Gandalf with an iAtty on a Provari...wonderful. Thank you Heather! And greetings to Newnan, GA from Southern California! A co-worker of mine grew up in Newnan.

What resistance and voltage you running on your provari? How's the vape experience like with your setup on 100% vg?

 

[MikeJA]

What resistance and voltage you running on your provari? How's the vape experience like with your setup on 100% vg?

My current reading for the atty is 3.9 ohms and I'm @ 5 volts on the Provari. Higher ohms than I'd prefer, but I'm a newbie at building my own coils. I think I did too many wraps around the wick and the resistance wire is not the optimal gauge. But cranking the provari up to 5+ volts generates a really great vape with the 100% VG.

 

[bappo]

Shadowfax in a VMOD 1.5ohm hybrid, CC HB in a CE3, similar volts. Similar flavor! HB is dryer and S is creamier. S wins 17-13.

Provari: 100% VG Boba's, mini nova is at 4.2v. Gandalf (all HHV) is 30/70 and I am at 4.0 or 4.1v in a nova/mini. CE3's and Vision Eternity RBA at 3.8v.

 

[Z_Ghost]

You might have sold two before long. Next time I pummel the mailman I'm gonna check his pocket to see how much money he has. If there's enough, I'm going to place my order for a new one myself.

You keep doing that and the mailman will just throw your mail at you, as he drives by at 60 mph.
Can a mail truck go that fast?
I had to build a mail truck trap to slow my mailman down so I can catch him...

 

[Calico1964]

Shadowfax in a VMOD 1.5ohm hybrid, CC HB in a CE3, similar volts. Similar flavor! HB is dryer and S is creamier. S wins 17-13.

Thanks bappo! I knew I wasn't crazy...well, kinda. Shadowfax wins!

 

[Bronze]

You keep doing that and the mailman will just throw your mail at you, as he drives by at 60 mph.
Can a mail truck go that fast?
I had to build a mail truck trap to slow my mailman down so I can catch him...

A brick wall will work too.

 

[Jourelem]

What resistance and voltage you running on your provari? How's the vape experience like with your setup on 100% vg?

My current reading for the atty is 3.9 ohms and I'm @ 5 volts on the Provari. Higher ohms than I'd prefer, but I'm a newbie at building my own coils. I think I did too many wraps around the wick and the resistance wire is not the optimal gauge. But cranking the provari up to 5+ volts generates a really great vape with the 100% VG.

Ic, my atty is 1.5 ohm, still trying to find the volt range.

Shadowfax in a VMOD 1.5ohm hybrid, CC HB in a CE3, similar volts. Similar flavor! HB is dryer and S is creamier. S wins 17-13.

Provari: 100% VG Boba's, mini nova is at 4.2v. Gandalf (all HHV) is 30/70 and I am at 4.0 or 4.1v in a nova/mini. CE3's and Vision Eternity RBA at 3.8v.

How's the throat hit with 100% vg?

I recently moved to 50/50 pg/vg with my second hhv order, previously was 70/30. I definately enjoy 50/50 more and am trying to figure out just how low I can bring down the pg further.

 

[Bronze]

Aside from my provari, I have a lavatube as well. When you get tired of polishing it you can just do what I did. Spray it with a plastidip color of your choice.

Nice job. Where do they sell plasti dip? Did you pull the guts out and spray or did you just mask and spray?

 

[Jourelem]

Hey bronze, you see the picture I posted of my lavatube?

 

[Jourelem]

Aside from my provari, I have a lavatube as well. When you get tired of polishing it you can just do what I did. Spray it with a plastidip color of your choice.

Nice job. Where do they sell plasti dip? Did you pull the guts out and spray or did you just mask and spray?

Homedepot or Lowe's. The only thing I covered was the top piece, didn't even cover the buttons. The spray won't get in it and that's that.

 

[gthompson]

Lowes, Home Depot, EBay, Amazon.

 

[gthompson]

Homedepot or Lowe's. The only thing I covered was the top piece, didn't even cover the buttons. The spray won't get in it and that's that.

Did you not cover the display?

 

[Jourelem]

Homedepot or Lowe's. The only thing I covered was the top piece, didn't even cover the buttons. The spray won't get in it and that's that.

Did you not cover the display?

Nope didn't cover it. Due to the nature of the liquid its easy to remove when its dry. Just used an exacto to kind of give it a line on the edges so when you peal it it has a route to follow.

 

[Bronze]

Nope didn't cover it. Due to the nature of the liquid its easy to remove when its dry. Just used an exacto to kind of give it a line on the edges so when you peal it it has a route to follow.

You got balls!

 

[Jourelem]

Go to the lavatube specific forum. I made a thread about how I accomplished this. If you still need answers, just ask.

 

[Bronze]

Go to the lavatube specific forum. I made a thread about how I accomplished this. If you still need answers, just ask.

Got a link to it? I'm thinking way beyond the lavatube. I got a 7-year old slippery neighbor kid I'd like to coat with the stuff. Not sure if I'd want to cut the eye holes out or just leave them covered.

 

[Jourelem]

Nope didn't cover it. Due to the nature of the liquid its easy to remove when its dry. Just used an exacto to kind of give it a line on the edges so when you peal it it has a route to follow.

You got balls!

The spray won't get into the internals with the lavatube. I assure you.

When you see what the material is like you'll understand. Search plastidip on youtube. You'll see how the car modifiers use it and get the idea why I didn't bother covering the buttons or LCD. And the display is actually inside the LT. What you see on the exterior is just a plastic screen where you can view the actual LCD inside.