Hello and perhaps you could help me?

[rostislav]

First of all, a big hello to everyone!

I would be really happy if you could help me

I have just bought a Kanger EMOW starter kit, charged the battery, but I have a problem... I charged the battery overnight, put in the liquid, but when I put the whole thing together, turn on the battery with 5 presses on the button (it blinks 3 times to confirm that) - I cannot get the vapor out. When I press the button 3 times - the voltage changes (green, red, or white LED blinks 3 times), but when I simply press and hold the button - the led of correct voltage lights up for a brief moment and then all three of them blink again. And no vapor comes out.

I actually can get a drag after the e-cig lies on the table for like 10 minutes. But then it just goes back to blinking 3 times with no vape output...

Can you help a newbie please?

 

[twgbonehead]

Not familiar with the EMOW but it sounds like you have a short.

Take the head off the battery, and look carefully at both pieces to make sure there isn't a shard of metal or something like that which is shorting out the connector.

Good luck, and Welcome to ECF!

 

[Razorback]

Yes, clean both connection points with a dry paper towel or something and try again...

Welcome Rostislav!

 

[mekavap]

is your coil well screwed in? can you try with another tank? is there a lock? ive had this type of problem with itaste pieces, was mainly because the button was loose and was pressing multiple times when i thought i was pressing once. but have no personal experience with EMOW. not my type of machine.

 

[Warpigs]

Welcome to ECF!