Hello to all

Status
Not open for further replies.

Blitzkrieg

Full Member
May 30, 2010
51
0
41
Connecticut
I have been using this forum for a while now to help me conduct research on products and it wasn't until recently i started to really take vaping seriously and become a more active member within the e-cig community.

To start off i have been vaping on and off for about a year and now i am looking to completely drop the analog habit. I have tried a few products like the vaporking, original bloog and the smoking everywhere. I just as of yesterday ordered the new bloog fusion in hopes that it it will fulfill my vaping needs better then other products i have tried in the past. I am really trying to find a product that truely simulates the analog experience/sensation, I am open to trying new product and open to suggestion any advice or opinions are greatly appreciated. Thanks in advance to all.
 

mondotoker760

Ultra Member
ECF Veteran
Verified Member
May 11, 2010
1,148
177
47
Escondido/North county San Diego CA
Try a 5volt devise...The vapor is warmer and theres atot more of it too.I used 3.7 volt ecigs to stop smoking but still felt something missing.It wasnt in tell I got my 5volt passthrough that I felt no urge to want or smoke a analog. I vap 5v at home and 3.7v on the go....it works 4 me.
 

Blitzkrieg

Full Member
May 30, 2010
51
0
41
Connecticut
I don't know anything about that system, but welcome aboard and hang in there. I've been analog free since I got my eGo and I'm not going back although I have been tempted.

the ego was one of my considerations for purchase before i went with the bloog fusion, i decided against it cause i hold a preference to cartomizers and read that converting it over led to a lot of draw issues, but from what i have seen it is an awesome well made product.
 

Blitzkrieg

Full Member
May 30, 2010
51
0
41
Connecticut
Try a 5volt devise...The vapor is warmer and theres atot more of it too.I used 3.7 volt ecigs to stop smoking but still felt something missing.It wasnt in tell I got my 5volt passthrough that I felt no urge to want or smoke a analog. I vap 5v at home and 3.7v on the go....it works 4 me.

i have seen this said alot, im going to look for a 5v pass through just to try it out, you have any suggestions on a good 5v passthrough to try?
 

mondotoker760

Ultra Member
ECF Veteran
Verified Member
May 11, 2010
1,148
177
47
Escondido/North county San Diego CA
I use a kr808 passthrough I got from litecigusa. You can get one in any model you have but get a pass that dont have a battery on it...Sum have them and if it does then it regulates the volts to only 3volts. go to cigliteusa....I know they have them without the battery.I also know vaporking has them but ive never used them.Hope this helps...happy vaping
 

Blitzkrieg

Full Member
May 30, 2010
51
0
41
Connecticut
I use a kr808 passthrough I got from litecigusa. You can get one in any model you have but get a pass that dont have a battery on it...Sum have them and if it does then it regulates the volts to only 3volts. go to cigliteusa....I know they have them without the battery.I also know vaporking has them but ive never used them.Hope this helps...happy vaping

i checked out both sites and i dont see a pass without the battery.
 

stubear62

Ultra Member
ECF Veteran
Verified Member
Sep 27, 2009
2,712
8
Myrtle Beach, SC
I would suggest the VP-PT as a 5v Pass thru. This is the only one I know of that there is no battery involved. Also, if you use the adaptor for the outlet its almost a true 5v (4.85 to 4.90v)
and if you use it in your usb port (must be 2.0 to use or won't work well) it is around 4.75 to 4.80 volt.
Just go to vaprlife [dot] com and check out what they have to offer.

Another thing I would like to say has to do with the eGo. I use the 808 carto's on it from V4L and these work the best. No taking off the label or anything. Also I use the 510 (batt) to 901/808 (atty & carto) adaptor. Not bad for the price (2.95 I believe or lower).
I get a sligh bit harder drawer but its fine to me and no problems what so ever..
 

Blitzkrieg

Full Member
May 30, 2010
51
0
41
Connecticut
I would suggest the VP-PT as a 5v Pass thru. This is the only one I know of that there is no battery involved. Also, if you use the adaptor for the outlet its almost a true 5v (4.85 to 4.90v)
and if you use it in your usb port (must be 2.0 to use or won't work well) it is around 4.75 to 4.80 volt.
Just go to vaprlife [dot] com and check out what they have to offer.

Another thing I would like to say has to do with the eGo. I use the 808 carto's on it from V4L and these work the best. No taking off the label or anything. Also I use the 510 (batt) to 901/808 (atty & carto) adaptor. Not bad for the price (2.95 I believe or lower).
I get a sligh bit harder drawer but its fine to me and no problems what so ever..

sweet thank you. The kit that i have on order currently is kr808 threaded and i also ordered some of the wow vapor cartos from V4L to try them out. i think in a week or 2 after i my fusion comes in and i get a chance to really see how it performs im gonna put in a order for the ego. the ego seems to be a vapor producing machine and i am very drawn to the quality and design of it. I was very concerned about converting it over and have a terrible draw on it. I am still somewhat new to all this and i know there are several methods out there for vaping and my opinion on the cartos might change after i play around with newer methods. There is still alot to learn and lot to try im just trying to find my perfect e-cig.
 
Status
Not open for further replies.

Users who are viewing this thread