Help me with a boxmod for Eleaf Lemo(23mm)

[Ozzybozzy]

Hello I am looking for a box mod that looks good with Lemo.

The watt range should be max 30watt, if it looks good and have more watt I will buy it

Ohm range 1-2 ohm.

Price range 50-130 dollars.

Battaries should be changable, I have Efest 18650 3100mah 10A, are these good enoug for safe vaping around 1.4 ohm/10-15watts????


I have been looking at a few but want to here your opinions and experiences

 

[thekraut]

Hi, i have my Lemo's running on the IPV Mini and a Hana DNA 30 Clone and I'm very satisfied with both Mods so far. They are both in the 60,- range and perform well. I would prefer the IPV Mini because of the adjustable 510 connector thou. The Battery you have in mind isn't total crap but i really would go for another one. I run Samsung INR 25R in my Mods and never had any trouble with them. You might look for some VTC4 or LG HE2 as well. If you aren't sure about a battery beeing safe have a look over here: Mod range | Steam Engine | free vaping calculators

 

[Ozzybozzy]

Nice thank you very much. Actually Im really into the ipv mini and have looked at some reviews.

The Aspire Atlantis(22mm) fits on nicely but still looks like there are some room about 1mm more for the Lemo, what do you say about that is it nice with no gaps between???

Another important thing is my safe vaping. If I vape with about 15watts on 1.4ohm will it be safe enough with the efest 18650 3100mah 20A(10A)??

And when you put the mod on the table, does it stand stable, ipv mini??

 

[Ozzybozzy]

I also have ksd hana clone in mind. Is it better than Clouper clones?

 

[jayholweck]

Hi, i have my Lemo's running on the IPV Mini and a Hana DNA 30 Clone and I'm very satisfied with both Mods so far. They are both in the 60,- range and perform well. I would prefer the IPV Mini because of the adjustable 510 connector thou. The Battery you have in mind isn't total crap but i really would go for another one. I run Samsung INR 25R in my Mods and never had any trouble with them. You might look for some VTC4 or LG HE2 as well. If you aren't sure about a battery beeing safe have a look over here: Mod range | Steam Engine | free vaping calculators

From my research he us correct...those batts are better than the efest....if u can find the genuine vtc5-get them... Are respected as best by many...but are no longer in production so are hard to find that arent clones.

Have you considered this - Sigelei 100w - 100 Watt Box Mod

Have seen this in action (co-worker who has been vaping for 3 +years) and enough couldnt be said about it.... He has many...many mechs, vv/vw devices and likes this one best by far.

 

[Cory Troutman]

Hello I am looking for a box mod that looks good with Lemo.

The watt range should be max 30watt, if it looks good and have more watt I will buy it

Ohm range 1-2 ohm.

Price range 50-130 dollars.

Battaries should be changable, I have Efest 18650 3100mah 10A, are these good enoug for safe vaping around 1.4 ohm/10-15watts????


I have been looking at a few but want to here your opinions and experiences

I actually just picked up an Eleaf Lemo and a Cloupor DNA30 box mod, the Lemo fits the mod perfectly and the combo is a dream. I typically vape on a .6 to 1.0 ohm coil build in my Lemo and usually vape around 10-15 watts. I personally use a Sony VTC5 battery in mine because im typically Sub ohm. Only downside so far to my Cloupor DNA30 is that with my brass monkee RDA It reads too hot easily because it heats up fast and i chain vape a lot. I just got a Vulcan RDA 22mm that i can actually chain vape on and im assuming is due to the heatsinks on the bottom of it, have yet to try my Tobh 22mm atty on it though. If your main focus is the Lemo i highly recommend the Cloupor DNA30. I picked it up for 60 dollars at Elev8 Vape (Google it). Shipped out and got here in about a week (Wouldve been sooner had it not been a holiday) Hope this helps!

 

[ahmadmfz]

Is the one on elev8 same as the one on fasttech? Regarding the hana clone

 

[Ozzybozzy]

Do you know where the authentic hana mod is made? I mean if it is chinese quality like every other mod I dont see why the price is so expensive.

But if it is real quality like the provari made in USA, I might order the authentic because I really dont want to pay the half for a clone.

Is the cheapest 250dollars?

 

[MonkeyTokes]

I agree the Hana Modz or Cana Modz (dif.manufacturers) DNA 30 box mod would look good, or the cloupor t6 or t8 though I think they take 1 26650 battery not 18650. On the plus side they are originals and not clones. Another cool device I just came across is the Aspire sub ohm (I think that's the name of it?) Its not a box mod but its still pretty sweet.

Your batteries should be safe, I don't think the draw would be nearly what the batteries are rated for if you stay around 1.4ohms

 

[thekraut]

The Lemo sits totally flush on the IPV Mini! No gaps at all.

 

[thomas l]

the lemo and IPV Mini are nice together. got mine a couple weeks ago for work .useing lg he2 battery

 

[DaniB]

Here are some pics of the Lemo on various devices

Lemo on IPV Mini



Lemo on Hana Clone 30W



Lemo on Sigelei 50W



Lemo on Sigelei 100W

 

[Ozzybozzy]

I agree the Hana Modz or Cana Modz (dif.manufacturers) DNA 30 box mod would look good, or the cloupor t6 or t8 though I think they take 1 26650 battery not 18650. On the plus side they are originals and not clones. Another cool device I just came across is the Aspire sub ohm (I think that's the name of it?) Its not a box mod but its still pretty sweet.

Your batteries should be safe, I don't think the draw would be nearly what the batteries are rated for if you stay around 1.4ohms

The Lemo sits totally flush on the IPV Mini! No gaps at all.

I actually just picked up an Eleaf Lemo and a Cloupor DNA30 box mod, the Lemo fits the mod perfectly and the combo is a dream. I typically vape on a .6 to 1.0 ohm coil build in my Lemo and usually vape around 10-15 watts. I personally use a Sony VTC5 battery in mine because im typically Sub ohm. Only downside so far to my Cloupor DNA30 is that with my brass monkee RDA It reads too hot easily because it heats up fast and i chain vape a lot. I just got a Vulcan RDA 22mm that i can actually chain vape on and im assuming is due to the heatsinks on the bottom of it, have yet to try my Tobh 22mm atty on it though. If your main focus is the Lemo i highly recommend the Cloupor DNA30. I picked it up for 60 dollars at Elev8 Vape (Google it). Shipped out and got here in about a week (Wouldve been sooner had it not been a holiday) Hope this helps!

From my research he us correct...those batts are better than the efest....if u can find the genuine vtc5-get them... Are respected as best by many...but are no longer in production so are hard to find that arent clones.

Have you considered this - Sigelei 100w - 100 Watt Box Mod

Have seen this in action (co-worker who has been vaping for 3 +years) and enough couldnt be said about it.... He has many...many mechs, vv/vw devices and likes this one best by far.

Here are some pics of the Lemo on various devices

Lemo on IPV Mini

View attachment 400798

Lemo on Hana Clone 30W

View attachment 400799

Lemo on Sigelei 50W

View attachment 400803

Lemo on Sigelei 100W

View attachment 400805

Thank you very much. This gave me a good idea. Lemo just looks big on anything

 

[DaniB]

You could always get the Lemo Drop instead. It holds about 2.5 ml. If I remember right the Lemo holds 5 ml.

 

[Ozzybozzy]

I will be the drop later for now I rock the lemo because I hate changing liquid all the time .....I vape alot...LOL!!

I have started to like the ACE50 alot and have seen one good review on it about the voltage range and watt range are perfect on this one.

it also looks pretty good.

So I have to choose between these:

Sigelei 50w version 2 (magnetic battery plate)
IPV mini (Easy screw off cap for battery)
Clouper t6 (magnetic battery plate)
ACE50( 2 screws for the plate)
IPV2s 70watt( 2 screws for the plate)

So between these the only downside of ipv2s and ACE50 is the backplate which I know Im going to use alot because of the battery. The others have magnetic which I like alot. The ipv mini looks really cool it has a retro look which I like and it is the best price here in Denmark.

The Sigelei 50W also have this retro look I like and even a atty with 24mm kan sit nice on it.

So maybe Im stuck between these two.

What would you choose?

 

[Cory Troutman]

Is the one on elev8 same as the one on fasttech? Regarding the hana clone

Similar but no. The one on fast tech is a much lower quality. I considered it when looking at box mods myself and read reviews on fast tech and I guess some of them come with missing screws as well as just a sloppier inside. Cloupor is one of the better Hana clones out there

 

[Cory Troutman]

I would go with the cloupor for price quality and 30 watts but it's a good thing for the person posting pictures of it on mods

 

[DaniB]

I will be the drop later for now I rock the lemo because I hate changing liquid all the time .....I vape alot...LOL!!

I have started to like the ACE50 alot and have seen one good review on it about the voltage range and watt range are perfect on this one.

it also looks pretty good.

So I have to choose between these:

Sigelei 50w version 2 (magnetic battery plate)
IPV mini (Easy screw off cap for battery)
Clouper t6 (magnetic battery plate)
ACE50( 2 screws for the plate)
IPV2s 70watt( 2 screws for the plate)

So between these the only downside of ipv2s and ACE50 is the backplate which I know Im going to use alot because of the battery. The others have magnetic which I like alot. The ipv mini looks really cool it has a retro look which I like and it is the best price here in Denmark.

The Sigelei 50W also have this retro look I like and even a atty with 24mm kan sit nice on it.

So maybe Im stuck between these two.

What would you choose?

As you can tell from the pictures I posted - I have a hard time choosing ! I have tried to move away from anything that requires screws to get to the battery (unless there is a usb port for charging) so that would eliminate the ACE50 and IPV2s for me. Any of the others would work well with the Lemo.

The only thing to keep in mind with the Clouper t6 is that it takes 26650 batteries rather than 18650s. That's not a problem as long as you don't mind buying two types of batteries. The Clouper t8 takes two 18650s and would also work for the Lemo. Because of the size of the battery the t6 is a little thicker than other box mods.

 

[Ozzybozzy]

Similar but no. The one on fast tech is a much lower quality. I considered it when looking at box mods myself and read reviews on fast tech and I guess some of them come with missing screws as well as just a sloppier inside. Cloupor is one of the better Hana clones out there

I would go with the cloupor for price quality and 30 watts but it's a good thing for the person posting pictures of it on mods

Do they come with authentic evolve dna chip?

 

[Ozzybozzy]

Actually batteries dont matter because I know Im going to buy alot of them anyway

I just want quality and it can atleast be used for 2 years or so