Help new to eCig's and have Joyetech eVIc!!!

[nuckandcup]

Not too familiar with ecigs at all and bought the eVic and read the manual and watched a few videos but when I vape i don't get any smoke? What could be the problem?

 

[phish]

Give us a rundown of your process. What atty/clearo/carto (thing the juice goes in) are you using? What is the resistance? What voltage are you using?

 

[nuckandcup]

3.6 v is a clear cartridge the gave me when i bought. resistance? not sure about that. Under switch there are a few options and it it on vv.

 

[nuckandcup]

would he resistance be 2.4 is listed under atomizer detecting

 

[phish]

This is from the eVic manual:

2.8.1
Atomizer Ω
：
Select “Atomizer Ω” and click enter button to show the current atomizer condition, then click the enter button and return the submenu

It should give you a x.x reading.

 

[phish]

Ok 2.4

Check out this chart.

https://s3.amazonaws.com/data.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

According to the chart, you should be between 3.2 and 4.5 volts. Is your wick fully saturated? Tilt it a few times. Then slowly up the voltage to the 4.5 mentioned and see if that helps things.

 

[nuckandcup]

turning up the volts helped and there is some smoke, do you think i should get cartridge with higher resistance? This one is 2.4

 

[crxess]

eVic power on
Reads Ohms - yours=2.4
reads suggested wattage? 5.2
Enters main screen

Will not operate until fully loads system, like booting a a computer

From main screen
Press fire button while drawing breath from tank/atomizer/etc.
Slow smooth draw for 4-6 seconds.
Vapor = working
No Vapor = not working.

Please attempt to find your Device/Firmware Version from the menus - 5 clicks to enter selection screens.

2.4ohms set Volts to 4.0 and test there.

 

[phish]

turning up the volts helped and there is some smoke, do you think i should get cartridge with higher resistance? This one is 2.4

I believe that is a standard resistance head. That's what I use on my Protank at around 4.5 volts and it works great.

 

[bboff]

turning up the volts helped and there is some smoke, do you think i should get cartridge with higher resistance? This one is 2.4

Vapor, not smoke