Hey all!

Status
Not open for further replies.

Ninjette707

Full Member
Apr 10, 2018
8
11
39
Can anyone help me figure out why juice keeps leaking out the bottom into the battery?
 

Attachments

  • 20180410_080843.jpg
    20180410_080843.jpg
    815.6 KB · Views: 8
  • Like
Reactions: stols001

Ninjette707

Full Member
Apr 10, 2018
8
11
39
Mine did that, too. Just a guess here: Either the coil isn't tightly screwed in or the juice is super thin.

I make sure the coil is tight every time I refill the tank because I learned early on that was causing it to leak out the air flow holes, maybe I'm tightening it too much? My juice does seem pretty thin as well though.. Do you think it's dangerous that it's doing this? Mostly after sitting overnight is when I notice this happening.
 
  • Like
Reactions: stols001

Ninjette707

Full Member
Apr 10, 2018
8
11
39
What device do you use? What is the PG/VG of the juice? I had it happen twice and was not quite sure why, either. I took it all apart and cleaned everything out. Both times for me, I used a thin sample juice. I assume that was my issue.
Just a simple Aspire K4 is what I use. They came together in a kit. 80vg 20pg juice.. This happens at least once a day.
 
  • Like
Reactions: stols001

Storm52

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jan 27, 2014
2,149
4,994
Shreveport, LA
Vanessa - You might be overtightening coil, deforming the o-ring at the bottom of the coil. One of the o-rings on the tank may have moved out of place and cause a lack of vacuum. Check all of your o-rings. Another suggestion would be to remove the tank overnight.
 

Ninjette707

Full Member
Apr 10, 2018
8
11
39
Vanessa - You might be overtightening coil, deforming the o-ring at the bottom of the coil. One of the o-rings on the tank may have moved out of place and cause a lack of vacuum. Check all of your o-rings. Another suggestion would be to remove the tank overnight.
Thank you, I'll look it over and see if anything is out of place.
 
  • Like
Reactions: stols001
Status
Not open for further replies.

Users who are viewing this thread