Hi, need an ID and some suggestions please

[PinkEgoTUser]

A friend of mine on here sent me 2 of these (in photo) and then I promptly put lots of glitter nail polish on them!

I like these because the base is textured and it's easier to remove. I also have some fake Kangar's I was sold off Ebay and they were not advertised as such, and got my money returned.

I also LOVE the Kangertech Mini Protank 2.

Yesterday was quite the day as my Husband bought me some new juice so I had about 4 of the above filled to try out. Well, 3 of them were destroyed, lol 2 Evod, 1 of the Unidentified and another EVOD that I was able to repair. Just the usual, extreme money shortage right now but am down to 2 now and need to get a couple more. Just don't know where to turn. I wish I could afford the Kangertech, they are the best. I do have the parts left to 2 of them (still looking for the other bones to one) and then the one in the photo.

Can anyone rec some inexpensive rebuildable ones, the EVOD I didn't like b/c they didn't hold much juice at all. I don't know if it's b/c they were fakes?? Or do the real ones have issues too? I'd like to do a "one stop" shop and get a few. I use 510 and rebuild my own coils and wicks and do like a grippy bottom as I don't have much strength in my hands.

I know, a lot of questions but I'll take what I can get Thank you!

 

[Dissonance]

Try the Kanger T3S... It's fairly cheap (~$5.00), Pyrex glass, kanger coils can be rebuilt, and it has the knurled bottom. The drip tips however are built in, so you can't change them out... Prolly not an issue since it seems you like to decorate your tanks, just figured I'd mention it

As far as actual rebuildables go... Unless you wanna fasttech it and wait a month or two, you'd be looking at atleast $20, prolly closer to the $30-40 range.

 

[twgbonehead]

You made this a lot harder with the glitter! Would be easier to answer if you took it apart and showed the insides.

If they have long wicks coming from the top, (and they fill from the top) they're a CE4 or similar. Pretty sure that's what they are, unless you added that gold band around the top yourself.

If the wick is on the bottom and very very short, (and they fill from the bottom) they are something like an H2, H5 or a CE4-R

The knurling makes it look more like an H2/H5. Does this use the same kinds of coils as the evods?

 

[twgbonehead]

As for where to get new heads, FastTech is great if you can wait for 3-4 weeks.

Otherwise, check out:
Kanger Protank II - 101 Vape

 

[PinkEgoTUser]

Yes, they are exactly like the the EVODS and the Kangertech.... if I recall correctly, I think they were a light gray plastic with measure marks on it, they are silver as well, not gold... the lighting was funky.

You made this a lot harder with the glitter! Would be easier to answer if you took it apart and showed the insides.

If they have long wicks coming from the top, (and they fill from the top) they're a CE4 or similar. Pretty sure that's what they are, unless you added that gold band around the top yourself.

If the wick is on the bottom and very very short, (and they fill from the bottom) they are something like an H2, H5 or a CE4-R

The knurling makes it look more like an H2/H5. Does this use the same kinds of coils as the evods?

 

[PinkEgoTUser]

Actually for the 2 busted Kanger Protanks, I just need the glass part, as they cracked... I still have the rest of the parts. I know I've seen them around and they were cheap, so I'll do that eventually. Thanks!

As for where to get new heads, FastTech is great if you can wait for 3-4 weeks.

Otherwise, check out:
Kanger Protank II - 101 Vape

 

[twgbonehead]

So something like this?:

https://www.fasttech.com/products/0/10007168/1589105-h2-bottom-coil-clearomizer-2-0ml

BTW, I like these heads, and they're very cheap if you buy them like this:

https://www.fasttech.com/p/1594202