High Desert Vapes Friday Night Free E-Liquids Giveaway!!
- Thread starter Brewtus
- Start date
- th_trl_thread_readers 0
- Status
Yeah I twisted the positive center pin wire and it snapped off. the KGO by the way has a hot glued in PCB. Talk about problematic...
300 charges very good! After 300 charges the average lithium ion battery loses .1v permanently as well as capacity in the form of length of usage before recharging. In reality a lithium battery can go thousands of charges but because we charge/discharge them so fast we are ruining them.
Yes the PCB was hot glued in I had to pry the center post out and push the PCB out with a TORX (star shaped) screwdriver to get it out to work on it. Talk about punks!
if it went swimming taking it apart and letting it dry (as long as you weren't vaping it at the time it went swimming) it should be ok.
ive been lucky and the wire was still attached to the board and broke lose of the pin. i just re soldered it
most egos last 10 months each. if you have 2 that's 1 year 8 months if you charge every other day.
So at 4.8v what is the recommended resistance in ohms that your atomizer should be (within .5ohms which is huge)?
3.0 ohms is as close as you're going to get in reality. So what is it close to at 3.2v the minimum of the Twist?
- Status
Similar threads
- Locked
- Locked
