-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

Vapourz_411 · Aug 3, 2014

The Skeleton Key mod Presentation....pictures tell the story best

Sorry about the long post, just want to share this with my High End family :toast:

The box...

Lid off showing cleaning cloth with logo....

After removing cleaning and case protection cloth...

The presentation case....

After opening the case...

Skeleton Key with kayfun....Now I need a high end genisis atty for this thing... I'm thinking about an OZ-22; they have one at my local vape shop...

Skeleton Key with Venturi RDA and Stillare V2i

I thought this was interesting, I have never seen this on a mod before???

jpcwon · Aug 4, 2014

^^^That's a beaut, Vapourz!! I don't know much about those mods, other than they look amazing! How does she perform?

Vapourz_411 · Aug 4, 2014

jpcwon said:
^^^That's a beaut, Vapourz!! I don't know much about those mods, other than they look amazing! How does she perform?

Thanks a lot jpcwon...she performs at least as good as an MCR or GP mod, very good indeed. The switch is so unique and unlike anything I have ever tried, definitely a different action for sure...but smooth as silk when firing! I have not yet tried 650 mode so I haven't fired a sub ohm build yet...but so far I am very pleased

I am really thinking a high end genisis mod is needed to complete the setup on this one...

Kudos to the manufacturer for thinking outside of the box...this one is definitely different in a really good way. I haven't pulled apart the switch but the owner of the shop I purchased it from did, and he says it is a brilliant design concept.

SINphul · Aug 4, 2014

Vapourz_411 said:
Thanks a lot jpcwon...she performs at least as good as an MCR or GP mod, very good indeed. The switch is so unique and unlike anything I have ever tried, definitely a different action for sure...but smooth as silk when firing! I have not yet tried 650 mode so I haven't fired a sub ohm build yet...but so far I am very pleased I am really thinking a high end genisis mod is needed to complete the setup on this one...

Kudos to the manufacturer for thinking outside of the box...this one is definitely different in a really good way. I haven't pulled apart the switch but the owner of the shop I purchased it from did, and he says it is a brilliant design concept.

Now I'm even more angry at myself for not filling out the VapeRev payment form faster

Beautiful setup, dude! Hopefully I can snag one myself in the near future. Your pics have alleviated any concerns I had over that engraving comment.

Vapourz_411 · Aug 4, 2014

SINphul said:
Now I'm even more angry at myself for not filling out the VapeRev payment form faster Beautiful setup, dude! Hopefully I can snag one myself in the near future. Your pics have alleviated any concerns I had over that engraving comment.

Sorry you missed this run, it's happened to me several times too

...I will look around and if I find one I'll send you a message ASAP :toast:

jaxgator · Aug 4, 2014

Jelly here!

Nice addition Vapourz. She's a beaut. :thumb:

Wishbone1965 · Aug 4, 2014

18350 Hybrid Mode

Every chess player should have one...

Vapourz_411 · Aug 4, 2014

Wishbone1965 said:
18350 Hybrid Mode

Every chess player should have one...

Very nice looking mod Wishbone, I almost got one but I waited too long, how do you like it?

Wishbone1965 · Aug 4, 2014

Vapourz_411 said:
Very nice looking mod Wishbone, I almost got one but I waited too long, how do you like it?

Thank you Vapourz! It's my favorite mod to date. The craftsmanship is just superb. Running micro coils and cotton in auto drip mode at the moment.

Vapourz_411 · Aug 4, 2014

jaxgator said:
Jelly here!

Nice addition Vapourz. She's a beaut.

Thank you jax

Vapourz_411 · Aug 4, 2014

Wishbone1965 said:
Thank you Vapourz! It's my favorite mod to date. The craftsmanship is just superb. Running micro coils and cotton in auto drip mode at the moment.

Does it leak when you run a genesis mod with that setup...I am thinking about getting a OZ 22 genesis atty and doing the same thing

Wishbone1965 · Aug 4, 2014

Vapourz_411 said:
Does it leak when you run a genesis mod with that setup...I am thinking about getting a OZ 22 genesis atty and doing the same thing

Not unless you just turn it upside down for a while lol

MattyB1503 · Aug 4, 2014

Vapourz_411 said:
Does it leak when you run a genesis mod with that setup...I am thinking about getting a OZ 22 genesis atty and doing the same thing

Works perfectly fine with mesh, running 200 inside of 500 and wicks every drop w/o a single dry hit.

Wishbone1965 · Aug 4, 2014

MattyB1503 said:
Works perfectly fine with mesh, running 200 inside of 500 and wicks every drop w/o a single dry hit.

Is that a micro coil setup?

MattyB1503 · Aug 4, 2014

Wishbone1965 said:
Is that a micro coil setup?

No, went old school. Dual 4/4 wrap, 2mm bit, 27awg K.

To answer your other question though; the Oz does not leak unless you hold it upside down for a long time . Has 0.7mm holes (3X) so I doubt juice could even get through there unless your on 100% pg.

Vapourz_411 · Aug 4, 2014

Wishbone1965 said:
Is that a micro coil setup?

I don't think so...but I plan on using dual micros with cotton if I get one

Vapourz_411 · Aug 4, 2014

MattyB1503 said:
No, went old school. Dual 4/4 wrap, 2mm bit, 27awg K.

To answer your other question though; the Oz does not leak unless you hold it upside down for a long time . Has 0.7mm holes (3X) so I doubt juice could even get through there unless your on 100% pg.

How do you like it Matty...is it worth the big price tag? How about the draw, those are some pretty small holes.

MattyB1503 · Aug 4, 2014

Vapourz_411 said:
How do you like it Matty...is it worth the big price tag? How about the draw, those are some pretty small holes.

Lets just say I had it posted but rather than updating from "2 tanks ran" to: 4 tanks, 6 tanks, 15ml, 30ml... I just closed it.

Vapourz_411 · Aug 4, 2014

MattyB1503 said:
Lets just say I had it posted but rather than updating from "2 tanks ran" to: 4 tanks, 6 tanks, 15ml, 30ml... I just closed it.

Lol, so it grew on ya...how is the flavor? Do you have any other high end genny's to compare it too?

MattyB1503 · Aug 4, 2014

Vapourz_411 said:
I don't think so...but I plan on using dual micros with cotton if I get one

I wouldn't get one if your not specifically looking for a tight draw high end genny, but they do have a very nice draw and incredible flavor.

After emailing back and forth with Nuccio a bit I would say if that's what you're looking for and can afford one I think you'll be pleased.

-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

Super Member

Ultra Member

Super Member

Senior Member

Super Member

Vaping Master

Senior Member

Super Member

Senior Member

Super Member

Super Member

Senior Member

Super Member

Senior Member

Super Member

Super Member

Super Member

Super Member

Super Member

Super Member

Similar threads

Users who are viewing this thread