-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

[Tinkiegrrl]

This thread has me itching to open my wallet again... I've got stuff coming in the mail though, so hopefully I can hold off for a bit! My first, genuine, high end, mech mod should be arriving in another day, and hopefully I can add a pic of my own soon.

 

[crazyarms]

So once I got my Tobh I thought that getting an Odin too was a bit of a waste since the tobh is such an awesome dripper but I am glad I didint cancel the order!
The odin has a much smaller chamber and produces some great flavor. The airflow is super easy to adjust as well. I am really enjoying the vape from this rda. It is for sure my new favorite. I also really like the function of being able to have a single coil setup as well as a dual. I set it up with some 24g micro coils metering at .3 and it is flavor monster. It is a seriously good dripper for the price!

 

[Tbev]

BCV surfrider/xxix buttons will work perfectly on any paps tube or any other 20x1 tube.

Thanks bud! BCV buttons are just recessed and don't have any safety ring of any kind to worry about right?

 

[chadsmo]

TOBH V2 came today.

 

[alkaiser]

Thanks bud! BCV buttons are just recessed and don't have any safety ring of any kind to worry about right?

it can be 'locked'. if you feel you need to lock it, you can spin the firing button up into the housing until it can't fire anymore. i used to 'lock' it when putting it into my pocket when it had stuff inside just in case it might fire (recessed buttons have fired in my pocket before).

 

[jpcwon]

TOBH V2 came today.

Very nice! Yeah I was recently able to score a V2 w/Tobh drip tip...should be delivered tomorrow....

 

[Coldpunk]

I've been seriously considering picking up the odin. It's that or the quasar.

 

[chadsmo]

I love the drip tip. They look great together.

 

[Tbev]

it can be 'locked'. if you feel you need to lock it, you can spin the firing button up into the housing until it can't fire anymore. i used to 'lock' it when putting it into my pocket when it had stuff inside just in case it might fire (recessed buttons have fired in my pocket before).

I see now, way cool I hate how even the lux 2.5 switch I hit it sometime and it won't fire BC it spun the safety on, what I really don't like and want to get away from is the ugly gap when the safety ring is on.

 

[crazyarms]

I've been seriously considering picking up the odin. It's that or the quasar.

I am really enjoying the Odin. Especially matched with the Loki Lab tip. Looks awesome and it vapes great.

 

[chadsmo]

My first time using 24g. Came out to .21


Wasn't too hard to just tweak the coils a bit to line up with the holes. Pretty easy build really.

 

[alkaiser]

I see now, way cool I hate how even the lux 2.5 switch I hit it sometime and it won't fire BC it spun the safety on, what I really don't like and want to get away from is the ugly gap when the safety ring is on.

hehe, you're in the opposite situation as me.
i actually love the locking mechanism of the paps v2 (except that it's not reverse threaded) and v3 switches. that's what made me get the mcr-101.

i can't stand not being able to lock a switch easier with a flick since i'm always in weird situations that require me to lock my mods. i also treat my mods like crap and throw them around in places where objects can set the mod off (i like a really light and smooth throw).

the only reason i sold my xxix/surfriders is the lack of a quick locking feature. it had the smoothest threads out of any mod i've ever used and the mod was just great in everyway. perfect keep at home next to my computer mod for me.

 

[StrikeIII]

So once I got my Tobh I thought that getting an Odin too was a bit of a waste since the tobh is such an awesome dripper but I am glad I didint cancel the order!
The odin has a much smaller chamber and produces some great flavor. The airflow is super easy to adjust as well. I am really enjoying the vape from this RDA. It is for sure my new favorite. I also really like the function of being able to have a single coil setup as well as a dual. I set it up with some 24g micro coils metering at .3 and it is flavor monster. It is a seriously good dripper for the price!

Nice! I'm loving the same setup. Did you re-finish the X or is it just he photo? It looks like a light polished finish than a brushed finish. Oh, and I'm not asking because it looks bad or anything just wondering.

 

[crazyarms]

Nice! I'm loving the same setup. Did you re-finish the X or is it just he photo? It looks like a light polished finish than a brushed finish. Oh, and I'm not asking because it looks bad or anything just wondering.

It has been refinished. I purchased this from a fellow member who had it refinished in Vegas by a machine shop. It is a semi polished finish. It is shinier than the stock X finish but not a full shine (no fingerprints) I kind of like it. Although I would like to someday own a new GP Paps X to compare the finishes.

 

[jpcwon]

My first time using 24g. Came out to .21


Wasn't too hard to just tweak the coils a bit to line up with the holes. Pretty easy build really.

I like how you did that to circumvent the AFC tabs....gives me ideas for when I get mine!

 

[Tbev]

hehe, you're in the opposite situation as me.
i actually love the locking mechanism of the paps v2 (except that it's not reverse threaded) and v3 switches. that's what made me get the mcr-101.

i can't stand not being able to lock a switch easier with a flick since i'm always in weird situations that require me to lock my mods. i also treat my mods like crap and throw them around in places where objects can set the mod off (i like a really light and smooth throw).

the only reason i sold my xxix/surfriders is the lack of a quick locking feature. it had the smoothest threads out of any mod i've ever used and the mod was just great in everyway. perfect keep at home next to my computer mod for me.

That sounds about right I hate having to lock them, granted the paps 2/3's are about as easy as it gets it still pisses me off, It seems do stupid to me that is still standard practice, but I'm recovering from a broken neck so I don't do much out n about so I see your point.

You notice any difference in vdrop between the stainless or sr, and the brass or copper, I'd prefer stainless, but don't wanna give up vdrop. .

 

[alkaiser]

i had the XXIX with the brass housing and copper switch/contacts. The difference between using the copper and stainless steel tube was not noticeable for me. The tolerances are awesome enough that the voltage drop for the complete stainless steel setup is really low.

 

[Tbev]

Sweet, I have a brass and a stainless tube currently and I couldn't imagine polishing it enough to keep it nice looking, I wrapped it with clear vinyl the first day I got it and it's working great, looks brand new, no patina at all. I wrapped the stainless tube too and it works fantastic keeping nics n scratches off.

 

[wonkeypickle]

Meh, not to offend anyone that has them as I will probably end up with one at some point, but Tobh needs to go back to the old logo stat.

imo the new logo is fine, but i think it would've been best had he just cnc engraved the old logo.

 

[SINphul]

imo the new logo is fine, but i think it would've been best had he just cnc engraved the old logo.

^ This. And I'd rather a legit serial number engraved, instead of the snarky (but justified) #notaclone hash tag at the bottom of the base. Keep the hash tags to Twitter and Facebook, and off my vape gear please