-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
High-End Mechanicals Chat, Tips, and Pics
- Thread starter b0redagain
- Start date
- th_trl_thread_readers 0
- Status
Lol...I started on v2 then went volt x2 then ego then evic then legacy then the rest of this madness
v2 was like $100 a month in carts.
I like my mechs unrelated. Of course that's easy for me to say, being that I'm never without a Provari... My current practice is to run a fresh battery in a mech until it gets down to about 3.5 volts and then move it to a Provari to finish it off. It's been months since either of them has seen a freshly charged battery.
That said, if I had moved into mechs before the Provari, I'd definitely have a Kick or two...
That said, if I had moved into mechs before the Provari, I'd definitely have a Kick or two...
VW Nemesis with polished short Loki and Matte medium Loki. Using a carto with a Kick until my Diver arrives.
I lucked up. There was a local B&M in town (found it after I found the V2) that sold cartos and juice by the bottle. After my initial purchase, I never made another purchase from them again. The B&M even had a flavor that was pretty close the V2's Saraha, which I really liked.
As for the madness... Perfect word for it. The Super-T ELA was supposed to be my one and only mech that would round out my vaping gear and be the last "high end" pv id have to purchase... Blahahaha... Pre-ordered in February of this year. Since then I've picked up 2 P+'s, a Noble 1 and two PAP's LUX's (and seriously considering a 3rd plus additional LUX tubes).
I blame David for this!!!
(edit... Thank's for reminding me Pete... consider the Nemesis Celeste too... Damn, what's wrong w/ me?
)
Last edited:
What the hell is this, I leave for a few minutes and I'm being talked about in the THIRD PERSON INVISIBLE?!
Also, I think I snagged a Paps v2.1 complete kit wif all da fun tubes and stuffz. Now I just have to decide to wait and see if this Friday promises anything nice for me.
Oh, and I have another Ba Gua on the way. I don't use the two I have. But they're quite beautiful. Where am I and what did you do with my top hat.
Also, I think I snagged a Paps v2.1 complete kit wif all da fun tubes and stuffz. Now I just have to decide to wait and see if this Friday promises anything nice for me.
Oh, and I have another Ba Gua on the way. I don't use the two I have. But they're quite beautiful. Where am I and what did you do with my top hat.
I lucked up. There was a local B&M in town (found it after I found the V2) that sold cartos and juice by the bottle. After my initial purchase, I never made another purchase from them again. The B&M even had a flavor that was pretty close the V2's Saraha, which I really liked.
As for the madness... Perfect word for it. The Super-T ELA was supposed to be my one and only mech that would round out my vaping gear and be the last "high end" pv id have to purchase... Blahahaha... Pre-ordered in February of this year. Since then I've picked up 2 P+'s, a Noble 1 and two PAP's LUX's (and seriously considering a 3rd plus additional LUX tubes).
I blame David for this!!!
(edit... Thank's for reminding me Pete... consider the Nemesis Celeste too... Damn, what's wrong w/ me?
I bought my 1st mech on 1/28/2013. There have been a lot coming and going since then.
That's my problem... Nothing of mine is "going"... I can't complain, I genuinely like everything I have and would have a tough time turning any of it loose... I suppose if David redesigns the P+ line to make them shorter (my only grip about the P+ line), I'd sell the two I currently have...
So far I've sent away a 69 Mod, EA Mod, Paps, and Gus. I liked them all for the most part...but I like what I have more. I'm sure in a month or two that will change as well if something different or better comes along. But I'll say I can't imagine anything better than a Roller, Nemesis, and Poldiac right now.
Speaking of Poldiacs if I was say... going to go ahead and order one... What do people like more Pete54 or MiriamWTH... Things in stock rule... So do Matte finishes.
U guys r gr8, especially BA and now I see that CB is also on a stockpile mode 
I don't have the dough to experiment... thus sticking with the Paps. So far I can't imagine myself without my Paps... the 1st one @ hand - Polished SS Paps v2.1, then the LUX happened and now awaiting the DHL tracked "Arrived at Ontario" Brushed SS Paps v2.5.
____________________________________________________________________
The Brass Ba Gua is paid for and to be shipped around end of this month. So is the Spheroid v2, paid and in USPS' forever transit. Next on target is the 22mm GP SnP with Diver and the Classic Piccolo Brushed SS with Polished end caps.
I don't have the dough to experiment... thus sticking with the Paps. So far I can't imagine myself without my Paps... the 1st one @ hand - Polished SS Paps v2.1, then the LUX happened and now awaiting the DHL tracked "Arrived at Ontario" Brushed SS Paps v2.5.
____________________________________________________________________
The Brass Ba Gua is paid for and to be shipped around end of this month. So is the Spheroid v2, paid and in USPS' forever transit. Next on target is the 22mm GP SnP with Diver and the Classic Piccolo Brushed SS with Polished end caps.
Last edited:
What size are you looking for? Some are available in different sizes.
Aww, thanks. One good thing about these high-end mods is that you won't lose much money if any at all when you are experimenting...they just hold their value. I almost lost money on the Gus Telescopic...but was able to trade it for a few things and then sell off those things to get my money back.
So that could mean that you want to use an 18500 with a Kick or you want to use a Kick and 18350 in an 18500 tube.
Cool - thanks! Direct link to post for people with uberscroll turned to 11:
http://www.e-cigarette-forum.com/fo...d-gp-paps-gp-piccolo-more-29.html#post9631878
Weird question: Do any of you have small hands?
I have several nice 14500 mods, but the only 18xxx mod I have is a Provari Mini that I picked up in the Classifieds for my roommate to use. One of the reasons I went towards mechanicals in the first place was that I wanted something small since I'm a small person with small hands, and I figured there wasn't reason for much extra space taken up on one by electronics. For those of you little people (or people with freakishly small hands; I don't discriminate), do you find a big appearance/feel difference in an 18xxx mech vs. a 14xxx mech?
I
my 14500 mods, but there's not quite the selection as you can find in 18xxx mods - where's the Piccolo Lux, ELA 14xxx, etc.?
18500 with a kick. I have not gotten great travel time out of an 18350 with a kick in the past. I think I'm gonna hold off on the Poldiac and see if this Paps deal goes through (I've already got my Rollers for side button mechs, right?). If it does, cheers, if it doesn't, I'll see what happens on Friday with any Nemesis...
I have high hopes for Friday... Better be my chance for a nemesis
Sent from my SGH-T999 using Tapatalk 4 Beta
Sent from my SGH-T999 using Tapatalk 4 Beta
Yeah, so the one you want is the 18650 size. That is what I have and I use all my mechs with an 18500 and Kick.
The Pete54 isn't available in 18650 but the MiriamWTH is. With what's available I would go with MiriamWTH or the Belial if you like brass. I consider the Belial my favorite mod right now.
- Status
Similar threads
