House of Hybrids featuring the Zenesis PV

[Zen~]

Well, It's official... I've become a registered supplier.

Ever since I started building the Zenesis Hybrid PV, I have received loads of requests to sell them, and as many of you know, I have not sold them due to ECF registered supplier rules. I've decided to make it legit, and offer my PVs directly to ECF members.

Currently, I have A VERY LIMITED SUPPLY WHICH WILL SHIP THIS MONTH (only a few units, actually) and after the first of the year, I will be ramping up to be able to supply more.

The two models I have available are the Standard Zenesis, and the Mini Zenesis... The Standard takes an 18650 AW IMR battery and the Mini uses an 18350 AW IMR. Both are hybrid PVs... These are all in one units that have the PV, juice tank and Rebuild-able atty all in one unit... there's a picture of a Standard in my signature line.

Once I sell out of my current inventory, I will start a pre-order list for additional units.

Also, I am able to supply Stainless Mesh Wicks for Hybrid PVs and rebuildable attys. The wicks are pre-rolled, pre-oxidized and Pre-Seasoned in your choice of 400x400 for PG, or 325x325 for VG. The VG wicks will be shipped in VG and PG will ship in PG... by arriving pre-soaked, they will immediately wick properly!

Have you had trouble making that U Bend with no kinks for your ScubaGen? I have wicks available that are pre-rolled, bent, and oxidized... ready to add your coil and install. Next week, I will have a solid supply of Kanthal wire available by the foot.

Early in 2012 we will have a website, but for now... building PVs is the focus. I'll add the site when the PV business slows down.

Any interest at all, or questions, post them here, or shoot me a PM.

 

[kiba]

btw i did something last night that really made my prozap work like brandy new, if anyone has a problem w/ theirs not hitting like it should you can try this;

~cut a q-tip in half, cannabalize a bic pen, put the half que tip in where the ink part would go, and grab some iso alcohol and now youve got a cheapo version of what provape sells as their "cleaning kit" on their website. then just soak both sides of the q-tip in iso alcohol and squeeze them/wring it out so that its just damp.

~take the zap, endcap and batt out, tilt it upside down and dab the chip/battery post inside the ProVari w/ the q-tip on the bic pen, then just rub it back and forth untill it shines, turn it upside down, (q-tip head should be pretty dirty) switch to the other side of the q-tip and do the same for the 510 connector on the device. of course give the device a little time for the alkyhol to evaporate but since it was only damp it shouldnt take long, I also used a dry tip on it to be sure.

~ grab the zap, take a paper towel and put it over your finger while pushing the floating pin in a few times, if theres any juice in there it should come out and go onto the paper towel, then take the pos screw off of the zap, take the positive extender out and spring, put paper towel over the part that is now open, turn it around, push in the floating peice and blow into it. any juice that is left in there should come out.

~ then just put it all back together and it should vape like a dream. this thing vapes like when I first got it. Honestly I should have been performing maintenance like this on it more often but i was having to much fun learning how to roll wicks/wrap coils to care lol, for the past couple days the vapor production hasnt been what it should be and now its right back to freight train status.

Hope this helps somebody.

 

[RippleInStillWater]

Congratulations on becoming a supplier -- I have seen the pics of these and they look sweet!!!

 

[Vchick]

Congrats Zen!

We met at Vapercon where I got to see these up close & personal and I can say they are absolutely beautiful!

Please o' please post a pic of the mini! Oh and prices..........please!

 

[snails1023]

Congrats and looking forward to owning some of your work!!

 

[Zen~]

Congrats Zen!

We met at Vapercon where I got to see these up close & personal and I can say they are absolutely beautiful!

Please o' please post a pic of the mini!

I'll have a pic of the Mini later this week... the first run of them isn't quite done!

 

[Drottwiler]

what are the prices on these mods.

 

[Zen~]

The Zenesis Standard 18650 is $225.00 and the Mini is $195.00. These include a nice case, and enough preoxidized wicks and kanthal to rebuild the atty monthly for a year. The kit also includes a filling syringe and replacement screws for the atty connections in case you lose a few along the way. You get everything but a battery and charger.

 

[Mudflap]

Wishing you much success, Zen. They look great!

 

[muddstar]

Which wick would I use for my 50vg/50pg juice mix?

 

[Zen~]

Which wick would I use for my 50vg/50pg juice mix?

Anything above 30% vg I recommend using the 325 mesh... But with a PV I now include both 325 and 400 so you can see what works best for your own juice.

 

[Drottwiler]

Will this be able to work with the kick when its released?

 

[CaminoDiablo]

A+ my friend!!!!! The beers on me Congrads on the Vendor status and hope to sneak one of those mini's away from ya

 

[Zen~]

Will this be able to work with the kick when its released?

The Kick presents an interesting scenario, as the dimensions are not yet set in stone.

The Standard 18650 version has enough room to use the kick with an 18500 battery based on the target size of the kick. The actual kicks that are in beta test are about 3mm too long, however.

If the kick releases in a size that wont work, I have room to change the configuration of the switch assembly of the Zenesis, and can provide a retrofit if needed. If somebody has a Zenesis and wishes to use the Kick under those circumstances the retrofit switch assemblies will be available quickly and at no charge to folks that have purchased a Zenesis 18650. Simply send back the original switch so I can recycle a few of the parts, after you've received the retro-fit.

 

[UA72Riddle]

Congrats on getting this going Zen!

The zenisis is going to make a great addition to any collection, and one I will have to add to my own soon!

 

[Zen~]

Congrats on getting this going Zen!

The zenisis is going to make a great addition to any collection, and one I will have to add to my own soon!

Thanks Riddle, I knew you would be happy to see this as it evolves...

Also, for anybody interested in seeing a big homely guy ramble on about his PV...

 

[Ruppy]

Gratz on the new venture Zen I imagine youll do well. I think your first few customers will sing the praises of your work.

 

[Zen~]

Gratz on the new venture Zen I imagine youll do well. I think your first few customers will sing the praises of your work.

Thanks Ruppy, so far, people have been happy with their PVs!

 

[Dougiestyle]

I love the PV! I'm eager to go forward with the "Kick" when it's available.

Any chance for a dual coil set-up (2 screw points)?

I love the form-factor of the 26500 model! I am visaully challenged and a larger wick/coil construction/installation area is ideal for someone like me. Will we see any more of these in the future? Please? Will buy after holidays are done with my limited finances lol.

 

[Zen~]

Any chance for a dual coil set-up (2 screw points)?

Probably never... dual coils create a completely hostile load to the battery, and they are not needed with this style of atomizer.