House of Hybrids featuring the Zenesis PV

[Katz123]

Is it 4 pm, damn Thats work time not sure i will get a chance at being in front of a pc :-(
But thank you for warning me, would be sad to be 12 hours late



Send by me

for those confused about what time it is where Event Time Announcer

 

[Landlord]

Something similar just happened to me.. I was sitting at the desk and when I went to get up the arm of the chair was stuck under the desk, when it came loose it lifted the desk and my standard headed for the floor... I pulled a Matrix and caught before it hit the floor.. started sweating instantly... now my chair is lowered... hahah that isn't happening again..

 

[Brewzz]

Something similar just happened to me.. I was sitting at the desk and when I went to get up the arm of the chair was stuck under the desk, when it came loose it lifted the desk and my standard headed for the floor... I pulled a Matrix and caught before it hit the floor.. started sweating instantly... now my chair is lowered... hahah that isn't happening again..

Mine was sitting on the counter top, and fell over on it's side. My bad luck that it hit at just the right angle to chip/crack.

 

[Striker911]

I have a question for "Z" aces here. I am starting to wonder if I have a diff issue besides break in. It took one full battery to vape a 1/4 of a tank on this, and the cap is set for vapor production, yet the production is only good like 1 of 50 pulls or so. The wrap is a true 4 (4 inside, 5 outside) coil. No shorts that I know of. Its just consistently not getting as hot as it should be IMO.

The juice is 50/50 VG/PG. It has the 400 mesh and has been untouched besides moving the coils around and moving the wick just a hair further from the post by unscrewing and moving at the center post and snugging it back up. It pulled better for about 4 pulls after that, then went back to sub par again. Everything looks good.

I put my PG on the wick before I filled the tank and when it burnt off, the coil was glowing evenly. I did the empty burn with PG 5 times before I filled the tank. Can anyone see whats going on? Oh and the wick is not touching the bottom of the tank or the post. I also have plenty of wicking acction. Just no enough heat IMO.

I am uploading a 2min clip but it says it wont be done for 80 more minutes. Yes I know. The net connection here in Mayberry sucks.

 

[Landlord]

Yep ill be rabbing a couple extras tubes as well... just in case

 

[vampiir]

I have to throw out a quick thank you to a bunch of you. You all know who you are. As a lot of you know, I've been somewhat obsessed with getting my hands on a Ti Mini. To the point that I put a wild WTB ad in the classes with a bunch of candy on the table. A bunch of you supported me with wishes of luck, and many bumps.

I have to give a special shout out to one very special Zenfidel who came to my rescue. I went on a buying binge acquiring an Orion V2, a Katana V3, multiples of the entire line of Genesis attys, a Provari mini, and a Bella tank. All with the intent to trade for a Tini since more than most on ECF value mods more than cash lol. This very special Zenfidel pretty much had the opportunity to feast on the buffet of trades I had, to literally rape me, and he simply wanted a SS Zen Mini, and one of the lessor items in my arsenal. He has a Ti Standard going his way, and he told me, that as much as it pained him to do so, that he knew I would derive more joy from the Ti mini than he would. He could have taken advantage of me and he didn't. What a true gentleman. I salute him, and I thank him from the bottom of my heart.

It is a true tribute to Zen, the Zenesis, and all the Zenfidels here. I salute you all.

PS....now we have to find a Ti Standard for Landlord!

HUGE grats! Trying not to turn green... no seriously, congrats!

Well, it appears that I have joined the ranks of the "Zenfidels with cracked tanks".
I was cooking breakfast for Wifey, and it fell over on the counter top. I didn't really think much of it, until I was looking to see how much juice was left. That's when I noticed a small chip on the top edge, and a crack running about halfway down.
I'm considering wrapping a piece of clear tape around it, to prevent it from cracking any further, but I sure don't like the idea.
I've been watching for the e-commerce issues to be resolved, so I could order a couple of back ups, but now I'm really chomping at the bit!

Sorry to hear that. =(

Happy Mothers Day to all of the moms. Gonna jump off here and go hang out with the moms in my life.

 

[Brewzz]

hi everybody,

Do you know if i would be able to buy Zens Eliquid i live in the UK? Or if i am lucky to buy his Zenesis Mini tomorrow could that be sent with the Mini?

wanted to get

Chocolate Milkshake
Granny Apple
Sugar cookies

Sorry if this is the wrong place to post this message,

All of Zens juices are now being sold through Bombay Vaping ZEN'S PRIVATE STASH
I believe you would have to order them separately.

 

[spw11]

Something completely un-Zen related....

I know from the pics that have been posted here that there are at least a few car guys (and perhaps gals) that may or may not be aware of this sad news.

Carroll Shelby passed away Thursday here at a local Dallas hospital at the age of 89. There aren't many that have had the kind of influence on the auto industry, racing and hot rodding as Mr. Shelby. What an amazing man and career.

Carroll Shelby dead at 89: Was legendary racer and designer of Shelby Cobra and the Mustang Shelby GT500 - NY Daily News

 

[Katz123]

Something completely un-Zen related....

I know from the pics that have been posted here that there are at least a few car guys (and perhaps gals) that may or may not be aware of this sad news.

Carroll Shelby passed away Thursday here at a local Dallas hospital at the age of 89. There aren't many that have had the kind of influence on the auto industry, racing and hot rodding as Mr. Shelby. What an amazing man and career.

Carroll Shelby dead at 89: Was legendary racer and designer of Shelby Cobra and the Mustang Shelby GT500 - NY Daily News

A moment of silence.......

 

[shaju23]

All of Zens juices are now being sold through Bombay Vaping ZEN'S PRIVATE STASH
I believe you would have to order them separately.

Thanks, i have been on the site but it only has delivery options for the US so i cant seem to order for delivery to the UK.

 

[Katz123]

I do not own these...they were my and my hubbies clients cars....we had to test drive them!!!!!

 

[wacko78]

i really wanna try black ice from bombay vaping but it's 18mg. i vape half of that or less

 

[vincentlim]

Nice I would like to test drive my one to

 

[Landlord]

i really wanna try black ice from bombay vaping but it's 18mg. i vape half of that or less

To be honest the flavor is so strong you may be able to cut it down with PG/VG.. I love this stuff dude.. Havnt stopped vaping it yet.. i think I got it Friday..

 

[quynhwil]

Strong is not the word. It almost choke me a couple of time. Not for the fainted heart.

 

[wacko78]

To be honest the flavor is so strong you may be able to cut it down with PG/VG.. I love this stuff dude.. Havnt stopped vaping it yet.. i think I got it Friday..

Any idea what pg/vg ration is in it. Maybe I can try cutting it.

 

[Landlord]

My guess is about 70/30 pg/vg

 

[tonymopar]

love the cuda!!!!!!!!!!!!

I do not own these...they were my and my hubbies clients cars....we had to test drive them!!!!!

View attachment 100110View attachment 100111View attachment 100112View attachment 100113

 

[Katz123]

love the cuda!!!!!!!!!!!!

Me too...I wanted to keep it for longer...more test driving...but the owner wanted it back It was all stock too except for the cam and msd ignition. She was a growler.. Would have been more fun if it was a standard transmission though.

The Pantera was a lot like working on a mustang...stock with a 351 cleveland

 

[Zen~]

Man so ... stoked.... Cant wait me and Karla are in the same boat... I am so tossed between a standard and a mini. I love the size of the mini. I already have 18650's a kick and looks. Like either way will need the 18350's....... .... it I am getting a mini. Just don't ask me an hour from now.

Just remember the Kick is a pain in the .... to use in the Zenesis... it's REALLY hard to get it out after you put it in, and it serves no real purpose besides giving you shorter battery life.

Negative ghost rider. Zen said he was releasing 200 of each when ecommerce came back. So there should be a bit of breathing room. With a 2 unit limit.

Gonna be about 40 minis and 30 standards out of the gate... more will follow in about a week.

Oh yeah, don't mistake what I am saying I have never been one to begrudge their fortune. If Zen and I were face to face and he said to me I can release 30 of them only on the condition that you can't have one I would still have encouraged him to do so.

Yeah... but I would never do that! Everybody has the same chance of getting one the way I'm doing it.

Can you elaborate on this Zen? How so? I'm coming from those Genisis myself and having never tried yours I'm curious.

I'm looking forward to getting my ZAP from you. One thing about some of the Genisis models over there I do not like is the use of silver wire vs screws for the connections. I like that yours are tightened w/ an allen wrench.

That's one very noticeable difference... but there's a lot of stuff going on in the way air flows that you can't see with the naked eye.

Last update on May 6th... "Z-atty Pro needs a metal finish which will take about a week." Does this mean that they will be on the site on Monday as well? If not do you have another update for us? Sorry to bug you, but I am just so sick and tired of using stuff that has a mind of it's own.

NO Z-ATTYS WILL BE ON THE SITE UNTIL THE PRE-ORDERS HAVE SHIPPED... I've said that a few times... right?

I need to figure out if I'm on the U or P but I'm not gonna PM Zen~! I've decided on the Z-Atty-P so most likely, I'm on the list for the U...

You're on the list for whichever one you want... just let me know.

ZENTANIUM WOOT WOOT!!! Yea buddy.

Sorry, but I had to get that off my chest.

LOL... And you wanted out, at one time!

Make sure it's at a clothing optional venue please.
I don't own any bathing suits and I'm not inclined to put my big ... in one!
However I am perfectly happy to let it hang out on it's own............ naked rofl!
C.B.

It will be...

I'm so loving hearing this!
I also wanted to thank you guys for coming into the show last night lot's of new faces too!
I so love this group of very smart wonderfully warm folks!
Also talked to rat last night for more than an hour what an awesome guy!
C.B.

Rat is an amazing man... an amazing sense of humor... brilliantly witty... if I was gay I would totally do him.

So if the Ti mini is ahead of schedule... Is it possible the BAMs will be too? I hope I hope....

Hehehe... you never know! But probably not.

Had a long weekend sponsoring the Make A Wish foundation and finally Caught up on my daily Zen forum news.. Like what im seeing... Zen have you ever thought of opening a face book group? (or is there one up and Im late?) At least I think it would be a good idea. OAN I ordered first charger and set of batteries!!!! now waiting on the sell to go live!!

I hate face book.

BAM question: I understand that the BAM is able to be modified to use a magnetic switch right? When will that be available? And, how do you do it?

It's available now... the Magnet set that's on the site will work.

Zen, how about a pic of the ZAG...

Next post will have some Zen-Porn

Ah ha, yea. I was so crushed when I saw the perfect coil go down. So now, I've made three and none of them perform like yesterday's. xD Oh well, just keep making them, I say. The crappy part is, the wick got a little bent so I don't know if it's creating any wicking issues. So.. I just put the kinked part into the tank had the unkinked part exposed to make my coil. >


And I'm just looking for only PG because I'm just gonna use it to check my coils. >.<;;

You can check your coils with anything... use some of your juice!

can i check my coils with vg? i don't use pg

See above.

I think my issue is that I am pulling too hard and not giving the coils the burn time they need to really kick my nuts. Im sure I will get it in time.
I know what you mean about having to sell something sooner then you should have. My Provari went in the mail box 4 days ago and I have been stuck with a MINI. Got that little sucker going pretty good though. Just the same old, vape and charge deal. I made this in a pinch but was only able to use it till the battery's died cause I didnt have a charger yet.
My SteelJan Elmo Mod - YouTube

Slow down... relax... don't suck the life out of it... you'll drive yourself crazy... nice easy draws will produce MASSIVE vapor.

striker911

till your wick gets good n broke indont fill the tank past 75% the air inside helps prevent vacuum locks. once its broke in doesnt matter after that. and as far as the draw, just experiment. everyones taste is subjective so a light or airy draw is somthing that over time you will find what u like n dislike. glad u got your zenisis. even with all mike has going on its nice to see even the smallest details like sentimental attachment to a number isnt overlooked.

I kinda didn't do the number thing on purpose... I don't even know what number he has!

thread is slow today....

I'm glad... it's taking forever to catch up after being away for over 24 hours.

I thought that was the case. I just nudged my coil until the leads weren't glowing anymore. And after three coils today, I finally got my coil back to a vapor and flavor level that I had yesterday. Woots!!

Why three coils? Do ONE and adjust it... EVERY COIL IS A GOOD COIL. EVERY COIL CAN BE ADJUSTED TO BE RIGHT. You'll learn that eventually.

congrats.. yea i popped a couple coils til i figured it out.. haha with a fresh batt them leads light up like a light bulb when theres a short..

HINT: Use a drained battery that's at 3.5 volts or lower. Makes it easier!

im perty close to that point as well.. i work in a machine shop so i wont take a Zenny to work, dont want nothing to happen, ya know? I do still use carto tanks.. Taste definetly isnt the same but it works..

I'm planing to make a WMZ (Workin' Mans Zen) one day... complete with a belt clip and made of steel with a rubberized finish.

trying to remember what time frame the Standards and Minis were to go live on Monday after eCommerce Gateway is open...little help?

You cannot remember what has not been posted...

ive got a Standard and AYS on the way.. but have been wanting a mini real bad.. ive blown my vape budget for this month and my wife will go ballistic if I take it out of the savings account so my dilemma is..

Do i risk unleashing a wrath the likes of a thousand hellbourne demons coming down upon me, or do I stay put and just watch as every single mini disappear before my very eyes..

decisions, decisions..

I'll make it easy... WAIT... Domestic bliss is more important than supernumerary Zenesis devices

Just hope I dont miss it whilst I'm on the train to work

Are the Z-attys going up tomorrow too?

If you're on the train to work when they go live, you work a REALLY odd shift...

And... NO Z-ATTYS will be on the site for AT LEAST TWO WEEKS.

I don't think that there will be any Z-Atty's for sale on Monday because Zen said that he has to fill the pre-orders from the lists first.

And that's why!

I got a package from Bombay yesterday and the Aussie licorice is soooo gooooood. Thanks Zen for supplying the recipe.

One question. Does anybody knows how much flovoring to use for for bombay diy flavor? I know.... one drop then test another then test. But what is the nornmal ratio. One drop per one mil or two drop per mil? Thanks

You can't DIY Aussie Licorice because you can't buy the flavoring...

The release may be around 4pm eastern time. So, 27 hours from now.

You have a crystal ball that needs a tune-up...

Hi all any idea when some z-atty-pro will be available? Thanks

See above... about two weeks...

I'm also on the list for a ZAP. Were we suppose to pay by now or will we get payment instructions when they're done? I'm guessing the latter?

You will get a payment notification and instructions this week.

guys it will go up when it goes up.....may be 4-8-midnight...who knows? doubt zen even knows when exactly. blindly hitting f5 at 4 is stupid. you will be doing it for hours most likely. leave your e-mail open and wait for the notification and keep reading the thread throughout the day

I know... or at list I think I know.... IF eCommerce is up and the gateway is tested... And no whining please if it doesn't happen. I will be putting them on the site AROUND midnight MONDAY NIGHT... That's not TONIGHT... it's TOMORROW NIGHT.

hi everybody,

Do you know if i would be able to buy Zens Eliquid i live in the UK? Or if i am lucky to buy his Zenesis Mini tomorrow could that be sent with the Mini?

wanted to get

Chocolate Milkshake
Granny Apple
Sugar cookies

Sorry if this is the wrong place to post this message,

Ummm... those are not even my flavors! They sound nice... but, not mine.

i really wanna try black ice from bombay vaping but it's 18mg. i vape half of that or less

Dilute it... the flavor will be fine up to about 50%

My guess is about 70/30 pg/vg

Good Guess!