House of Hybrids featuring the Zenesis PV

[Shaitaan]

actually it isnt, the dragon will be about the size of a standard......

He was giving hints about it until other modder(s) started stealing his ideas from the hints. He had to stop.

It will be large. The size of the 2011 Limited. It will have a 12ml tank. It will have a dragon on it.

The 2012 Limited will be the same size as the Standard.

 

[vicsan]

it's only a myth....... only kidding, it's a zenesis standard sized pv, Zen~'s not released it and has only given a few hints about what it is (a friends know about them), and at this time there's no release date yet..

You are just the guy I needed to see! Do you know the size of the Z-Atty-U? You had a prototype, right? Would you know if the tank is the same size as the mini or standard?

 

[Shaitaan]

I don't know. Do you have the newest switch? If so, there's magnets inside to adjust the resistance, but I would think changing it from the original resistance would make the switch play even less. Here's how to change the resistance if you want to play with one to see if it helps:

On the last page of the FAQ:
http://www.e-cigarette-forum.com/fo...esis-hybrid-personal-vaporizer-faq-page4.html

If he's a Febbie, then no he doesnt...

 

[Shaitaan]

You are just the guy I needed to see! Do you know the size of the Z-Atty-U? You had a prototype, right? Would you know if the tank is the same size as the mini or standard?

it is posted in here somewhere.....I had the prototype for the GG version....

 

[Shaitaan]

You are just the guy I needed to see! Do you know the size of the Z-Atty-U? You had a prototype, right? Would you know if the tank is the same size as the mini or standard?

the z-atty-pro, G and U should all be approximately around the same size resevoir...

 

[vicsan]

actually it isnt, the dragon will be about the size of a standard......

Really? I thought zen said the 2012 Limited was the same size as the Standard (a question I asked specifically) and the Dragon would be the size of the 2011 Limited with the large 12ml tank?

Well, you would know and we will find out in the near future.

 

[mergryphon]

By the way... when you tell the TSA that you have some DoD privileges, they remind you that they are NOT the DoD

Half the time they are so naive and focused on protocol my DHS HQ badge has no effect on them.

I missed snagging my mini. *sniff*

 

[Zen~]

Zen i know me and sl rat are waiting for your Zen update on the z-atty-pro if you are still on schedule or not and i think i answer for everybody when i say can't wait till i get it in my hands, sorry as far as what happened to you with the TSA i know how they can be sometimes my brother-inlaw works at LAX he says they have a habit of doing things like that i know yours was a little different because you use to works with bombs why you quite i don't know but here i am again rambling on again just would like a update on z-atty-pro ones you get settle in Thankssssss

The zen alerts are always up to date... And I'm considering removing impatient people from the lists for their own good!

 

[vicsan]

the z-atty-pro, G and U should all be approximately around the same size resevoir...

Same diameter as the Standard and Mini? Or a completely different size? I saved some of my polycarbonate tubing just in case the Z-Atty tanks are the same diameter as the Standard and Mini.

 

[bewsii]

I think Zen could use a 3d logo >

*incoming present, Zen!*

 

[sinnyc]

The zen alerts are always up to date... And I'm considering removing impatient people from the lists for their own good!

Who would be left?

- Tim

 

[pchela]

Okay, question here. Hopefully not a silly one! What can cause power interruption Here's what's happening. I press the button on my switch - nothing happens. I try several times... one in 10 times, I'll get a whispy line of vapor, one in 20 it will connect long enough for the coils to light up. This is with several different batteries. When the coil does light up, it looks even. I have no idea what a dying coil acts like... is this it or do I have something else going on?

 

[paulowafu]

some of of them won't push through till the end but everything fires well. some are just too short.

 

[Zen~]

i have another question. some of my mini's and standard have too little space from the button switch. not really much to press. any tips on how can i adjust it to give it a better feel or long space before it fires?

Yes... There are new switch buttons that I will be sending you soon... I told you about those, and asked if you wanted me to send the PVs after the new switches were in, or just get them to you as is.

 

[the ob]

The zen alerts are always up to date... And I'm considering removing impatient people from the lists for their own good!

I liked this comment, but then realized I would probably be the first one kicked off the list

kidding, I have been patient lately. mostly because I have at least one and I have no choice

 

[vicsan]

some of of them won't push through till the end but everything fires well. some are just too short.

Try a magnet spacer until you get the new switches...which are due VERY soon. You can try unscrewing the switch screw a little and adding Noalox to it for the ones that are too short, but then the switch tends to unscrew and become very loose. The best temporary solution is a magnet spacer.

 

[Zen~]

Half the time they are so naive and focused on protocol my DHS HQ badge has no effect on them.

I missed snagging my mini. *sniff*

Jen, I never got back to the bash... How is your standard behaving now?

 

[Murdock Ruml]

Same diameter as the Standard and Mini? Or a completely different size? I saved some of my polycarbonate tubing just in case the Z-Atty tanks are the same diameter as the Standard and Mini.

I am sure the z-atty-pro has a larger diameter then the zenesis. It is about the same diameter as the provari.

 

[vicsan]

I am sure the z-atty-pro has a larger dia then the zenesis.

What about the Z-Atty-U? That's what I have on order.

 

[paulowafu]

Yes... There are new switch buttons that I will be sending you soon... I told you about those, and asked if you wanted me to send the PVs after the new switches were in, or just get them to you as is.

oh... sorry about that. i thought it was only concerning the Zenesis standard regarding the 1600mah and 2000mah issue. so everything is solved! thanks Zen