How do I bring down my atomizer 's ohm lower?

[Ginopr82]

I have an AGA-t2. Im using a 32 gauge kanthal wire. 3/4 wrap. And I keep getting 1.9 ohm. The other day I unwound the last wrap and had a 2/3 and still had a 1.9 ohm reading on my Provari. What do I need to do? What's wrong?

 

[Elemental0619]

Well what resistance are you shooting for?

 

[birdieboogey]

You shud try 30awg, with same wrap. You will get lower ohm

 

[ukeman]

I have an AGA-t2. Im using a 32 gauge kanthal wire. 3/4 wrap. And I keep getting 1.9 ohm. The other day I unwound the last wrap and had a 2/3 and still had a 1.9 ohm reading on my Provari. What do I need to do? What's wrong?

You did the right thing to reduce resistance by shortening the wire (unwrap one)....
bear in mind the Provari will not allow under 1.0 Ohms if that... but thats not the problem here.
It also depends on the width of the wick; if yours is very narrow, one wrap won't reduce much.
You could try a 3/4 of 30g kanthal. Thicker wire is lower resistance.

 

[Ginopr82]

Well what resistance are you shooting for?

Around 1.3 or 1.5

 

[Elemental0619]

Around 1.3 or 1.5

Like Ukeman said try a thicker wire such as 30 AWG with 3 or 4 wraps, that should do it.