• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

How do I use the Ego Mega Tyoe B atomizer?

Status
Not open for further replies.

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
This is going to sound so Noob, no worries I am still Noob... I just got my Provape order (Yes I got a Provari!) and it included 3 Ego Type B Mega atomizers... I have never dripped before and there were on clearance for $3 each, figured good way to try it.

Never even thought of it before, but I will need a 510-ego adaptor for using on my provari but until then I will use my twist for it... this is the link for it : ProVape adapter - Ego Mega Atomizer Tytpe B Stainless

The picture of inside the atomizer doesn't look exactly like mine when I look in it... on the site it looks like it is just a flat surface with a textured porous surface, mine has a tip coming up from the center and a flat rectangular metal piece around the tip(looks like the metal piece some candle wicks have around them).... am I supposed to take that out before using it?

Do I dry burn off the primer liquid before use? I really don't know what to do with it, lol.

Edit: I also just realized that my drip tips don't fit the top of the atomizer? It is too large a diameter to fit a 510 drip tip ... hmmmm. On a positive note, the Provari is awesome!
 
Last edited:

tygertyger

Super Member
ECF Veteran
Verified Member
Oct 16, 2012
810
377
Fraser Valley, BC, Canada
This is going to sound so Noob, no worries I am still Noob... I just got my Provape order (Yes I got a Provari!) and it included 3 Ego Type B Mega atomizers... I have never dripped before and there were on clearance for $3 each, figured good way to try it.

Never even thought of it before, but I will need a 510-ego adaptor for using on my provari but until then I will use my twist for it... this is the link for it : ProVape adapter - Ego Mega Atomizer Tytpe B Stainless

The picture of inside the atomizer doesn't look exactly like mine when I look in it... on the site it looks like it is just a flat surface with a textured porous surface, mine has a tip coming up from the center and a flat rectangular metal piece around the tip(looks like the metal piece some candle wicks have around them).... am I supposed to take that out before using it?

Do I dry burn off the primer liquid before use? I really don't know what to do with it, lol.

Edit: I also just realized that my drip tips don't fit the top of the atomizer? It is too large a diameter to fit a 510 drip tip ... hmmmm. On a positive note, the Provari is awesome!

Congrats on the Provari :)

Re: the dripping, You might want to hold off until the veterans weigh in, as I've never used one of these..... but here's what I'd do if I didn't want to wait....

I wouldn't dry burn this..... too much chance of popping the coil I'm guessing.
Yes, pull the mouthpiece off first.... Blow out as much of the primer as you can, then drip maybe 4-6 drops (I'd usually say 3, but I think these hold more) of pure PG or VG there.... let sit 30 seconds or so, and blow out again. Prime with your juice and go hard. If you don't have pure PG or VG, use juice (I just hate to waste it blowing it out).

If you've never dripped before, pay attention after a few puffs..... watch for a hit that's less flavorful or almost has a faint hint of dry hit in it. That's your cue to drip again :)
 

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
Thanks, but what about the little metal piece in there? Mine doesn't look like the picture on provape, it has a little piece of metal like a one of those small round candles have on the bottom of the candle and a small circular tube coming up through it which I cannot see in the picture from the website. There is a joetech logo on the size of my tube that says it is ego-t, but the website says not to use the tanks with it but it is good for dripping.

Also, they never came with mouth pieces... and the 510 drip tips I have are not large enough around to fit tighter over the huge opening on the top of the atomizer... I think I must be missing something, I just threw them into the order cause they were cheap and the description said they were good for dripping. The provape picture shows a mouthpiece... but all i got was the tube (with atomizer inside).

Here is a pic: 100_0581[1].jpg
 

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
I don't know who sells them anymore or else I'd help you out. Sorry buddy

No problem, I guess should have researched it before I bought it... was in a rush on Black Friday to get the 5% discount and before all the blemished provaris were gone... going to pretty hard to drip right into that little spike! And without a mouth piece , LOL!:laugh:
 

RollandOfGilead

Super Member
ECF Veteran
Verified Member
Jul 1, 2012
430
122
45
Kingston, On, Canada
Thanks, but what about the little metal piece in there? Mine doesn't look like the picture on provape, it has a little piece of metal like a one of those small round candles have on the bottom of the candle and a small circular tube coming up through it which I cannot see in the picture from the website. There is a joetech logo on the size of my tube that says it is ego-t, but the website says not to use the tanks with it but it is good for dripping.

Also, they never came with mouth pieces... and the 510 drip tips I have are not large enough around to fit tighter over the huge opening on the top of the atomizer... I think I must be missing something, I just threw them into the order cause they were cheap and the description said they were good for dripping. The provape picture shows a mouthpiece... but all i got was the tube (with atomizer inside).

Here is a pic: View attachment 156885

It looks like there might have been a mix up... it probably is a Tank atty as those "spikes" are meant to go into the tanks thru the holes in them...http://a248.e.akamai.net/origin-cdn.volusion.com/mnpvr.tdujq/v/vspfiles/photos/EGOtcart-2.jpg

They may have accidentally sent you these...eGo Type B Atomizer

Sent you type "b" instead of "mega b"
 
Last edited:

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
Congrats on the Provari :)

Re: the dripping, You might want to hold off until the veterans weigh in, as I've never used one of these..... but here's what I'd do if I didn't want to wait....

I wouldn't dry burn this..... too much chance of popping the coil I'm guessing.
Yes, pull the mouthpiece off first.... Blow out as much of the primer as you can, then drip maybe 4-6 drops (I'd usually say 3, but I think these hold more) of pure PG or VG there.... let sit 30 seconds or so, and blow out again. Prime with your juice and go hard. If you don't have pure PG or VG, use juice (I just hate to waste it blowing it out).

If you've never dripped before, pay attention after a few puffs..... watch for a hit that's less flavorful or almost has a faint hint of dry hit in it. That's your cue to drip again :)

Good advice, now I need something to drip with!:)
 

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
Looks the same as my old ego t. Drip some drips is try it out? Congrats on the provari as well

It looks like there might have been a mix up... it probably is a Tank atty as those "spikes" are meant to go into the tanks thru the holes in them...http://a248.e.akamai.net/origin-cdn.volusion.com/mnpvr.tdujq/v/vspfiles/photos/EGOtcart-2.jpg

They may have accidentally sent you these...eGo Type B Atomizer

Sent you type "b" instead of "mega b"

Thanks for the info guys, and Rolland I think you are right... the description of the link you provided says "Type B. The Joye ego tank mega atomizer comes with a center spike." Also, on the outside of my tube it says "Ego-T Joyetech". Also, the description of what i thought I ordered said it was for dripping and not for tank use. Hmmm... contact provape I guess.
 
Last edited:

NickFit

Super Member
ECF Veteran
Verified Member
Aug 29, 2012
645
339
Newfoundland
heh... yes, I was just going off the picture, so I was confused -- especially when you said there was no mouthpiece! Hope they can either fix you up with cartridges for what they sent or send you what you ordered....

Sent Provape an email, then a few pictures, and in under 20 minutes from first email the issue has been resolved. They are going to send out the right atomizers tomorrow. Seeing how I ordered them on Black Friday in the afternoon and they still had it shipped out that same day, I can imagine they were pretty busy and well, mistakes happen.

Great customer service!
 
Status
Not open for further replies.

Users who are viewing this thread