How do you fill a Clearomizer without making a huge mess?

Status
Not open for further replies.

K24A3

Ultra Member
ECF Veteran
Jun 15, 2010
1,122
45
Aus
I was modding the CE2's to some extent as well, but I always ran into leaking issues. Hopefully the new CE3's will have a decent redesign, including an easy refilling method.

By the way, I've found that the G4's at 5volt perform very similar to the CE2's, none of them have leaked after two weeks, and they are easy to refill as they are without modding.
Some lower ohm G5's are on the way which should work well at 3.7v. In my honest opinion, the G series have very good potential to be a hassle free well performing carto.
If you haven't tried them, at least grab a 5-pack of G5's and see how they pan out for you. Or if you have a 5v device, the G4's will do nicely.
 

Rolondo

Senior Member
ECF Veteran
Jul 4, 2010
143
23
Seattle
I was modding the CE2's to some extent as well, but I always ran into leaking issues. Hopefully the new CE3's will have a decent redesign, including an easy refilling method.

By the way, I've found that the G4's at 5volt perform very similar to the CE2's, none of them have leaked after two weeks, and they are easy to refill as they are without modding.
Some lower ohm G5's are on the way which should work well at 3.7v. In my honest opinion, the G series have very good potential to be a hassle free well performing carto.
If you haven't tried them, at least grab a 5-pack of G5's and see how they pan out for you. Or if you have a 5v device, the G4's will do nicely.
I ordered the vortex cartos from got vapes awhile back and was very dissappointed (think these are the same as the G4s) - these were 2.7 ohm and your conclusion is the same one I reached - unfortunately my only PV options at this point are 6v (v3) and 3.7v - just don't want to spend $180 and up at this point for VV just to make these things work....maybe someday - I'll just wait for the lower ohm version - also agree I would love these if they performed like the ce2 - if you know of anyone that's close to stocking these, let me know - Thanks
 

K24A3

Ultra Member
ECF Veteran
Jun 15, 2010
1,122
45
Aus
I ordered the vortex cartos from got vapes awhile back and was very dissappointed (think these are the same as the G4s) - these were 2.7 ohm and your conclusion is the same one I reached - unfortunately my only PV options at this point are 6v (v3) and 3.7v - just don't want to spend $180 and up at this point for VV just to make these things work....maybe someday - I'll just wait for the lower ohm version - also agree I would love these if they performed like the ce2 - if you know of anyone that's close to stocking these, let me know - Thanks

The G4 and G5's are the new revision of the Vortex, many of the problems have been solved now.
I'm using the G4's on a 5v USB Passthrough and it's like a CE2 without the refilling hassles and leaking. But since you don't have a 5v device, I can't recommend the G4 unless you grab a USB Passthrough.
The G5's are almost 1ohm less than the G4 so they should perform well at 3.7v. If you are game, grab a pack and see how they pan out. They are only $9 for a 5 pack at the moment.
Link: G5 Cartomizers
I have some on the way, can't wait to try them :)
 
Status
Not open for further replies.

Users who are viewing this thread