How to un-flood your REO

[rc10mike]

I figured out a nice trick to un-flood an over squonked atty.

1. Quickly turn the REO almost all the way upside down..

2. Then, make a nice slow deep press on the bottle..and hold

3. Quickly turn right side up, and let go of the bottle..

In my experience thus far, this method draws the excess liquid back into the bottle. If your catch cup is full of liquid, this might be a bad idea. The best time to try this is before the liquid has a chance to fill the catch cup.

 

[TennDave]

I typically take the atty off and blow it out...put it back on and the drier wick seems to suck up the excess fluid in the catch cup, or if no fluid, a light squonk and I can vape pretty normally again.

 

[nerak]

This is great to read what others do!

I blow into the atty. Then hold the REO so the juice is on one side of the drip well and only two holes of the atty touch the juice. I take a slow and light draw and vape. Only a small amount of juice goes in the atty and I can get a good vape. After a couple of time doing this the atty is no longer flooded.

 

[Tracker1861]

I typically take the atty off and blow it out...put it back on and the drier wick seems to suck up the excess fluid in the catch cup, or if no fluid, a light squonk and I can vape pretty normally again.

+1

 

[jifjifjif]

I've done all of these tricks before, but now i am really getting the hang of blind squonking and i am rarely flooding the atty any more.