Just thought I would mention this as I recieved 3 packs of carts from Janty Euro,
1 pack had slightly different carts to the other 2 packs info about this I am explaining below.
janty Dura cart V Dura C cart.
There are 2 types of carts I have that fit the Dura C that
came with my Dura C Set from Europe.
The Cart that use too fit the Dura leaks liquid at the join
also into the mouth at times when you draw on it.
They Fixed this with a new Cart for the Dura C.
The Dura type leaks liquid a little at the join and to the
small draw hole that you draw the vapor through, thus getting liquid into your mouth,
The Dura C type does not leak in any way liquid at the join
or to the small draw hole.
How to see the Differents between the 2 different Carts.
The external difference between the 2 types is the flat
sections that inserts into the atomizer.
The longer flat section leaks,
The shorter flat section does not leak.
To check which type you have I have added these
measurements below of the flat section insert area.
Dura: Cart (Leaks)
Length of flat areas: 8mm
Gap/Width between the 2 flat area's: 7mm
Hole on each side of the flat area: 0.5mm (ish)
Dura C: Cart (Does not Leak)
Length of flat areas: 7mm (larger gap of full round area from the join giving a better seal)
Gap/Width between the 2 flat area's: 6.3mm
Hole on each side of the flat area: 0.7mm (ish)
Stylo (Aka Martyn)
1 pack had slightly different carts to the other 2 packs info about this I am explaining below.
janty Dura cart V Dura C cart.
There are 2 types of carts I have that fit the Dura C that
came with my Dura C Set from Europe.
The Cart that use too fit the Dura leaks liquid at the join
also into the mouth at times when you draw on it.
They Fixed this with a new Cart for the Dura C.
The Dura type leaks liquid a little at the join and to the
small draw hole that you draw the vapor through, thus getting liquid into your mouth,
The Dura C type does not leak in any way liquid at the join
or to the small draw hole.
How to see the Differents between the 2 different Carts.
The external difference between the 2 types is the flat
sections that inserts into the atomizer.
The longer flat section leaks,
The shorter flat section does not leak.
To check which type you have I have added these
measurements below of the flat section insert area.
Dura: Cart (Leaks)
Length of flat areas: 8mm
Gap/Width between the 2 flat area's: 7mm
Hole on each side of the flat area: 0.5mm (ish)
Dura C: Cart (Does not Leak)
Length of flat areas: 7mm (larger gap of full round area from the join giving a better seal)
Gap/Width between the 2 flat area's: 6.3mm
Hole on each side of the flat area: 0.7mm (ish)
Stylo (Aka Martyn)
Last edited: