Huge Giveaway! Innokin launch their DISRUPTER Device on ECF - 400 To Win
- Thread starter Oliver
- Start date
- th_trl_thread_readers 0
- Status
Yeah no kidding. If you can't muster even minimal optimism over this ... probably time to move on. If you win, great. If not, so what? It's a GIVEAWAY. People, stop acting like you're entitled to one.
(the above is a general statement, not directed at any individual poster)
(the above is a general statement, not directed at any individual poster)
Do not feel to bad...On the 15M contest I was close to one minute away from the GP according to the post records, I assume they are close to accurate anyway, yet all those around me at the time of the 15M post everyone around me won a prize but me. I look at it as being on a blacklist of some sort....well that is my own justification anyway.Look at the last drawing, how many of us was there that gave answers? Not a whole lot and I still lostNow I am going up against 1000s of people from around the world
I don't have a chance
I am the Charlie Brown of contest
Look at the last drawing, how many of us was there that gave answers? Not a whole lot and I still lost
You have a lot better chance of winning one in this contest than most. They have 380 more to giveaway, where as most contests you have thousands of entries and only one prize! They are also doing more quick draws, so that ups your odds considerably as not that many people enter the quick draws. I didn't think I'd be lucky enough to win one either, but I did. I've got my fingers crossed for you
As was said earlier. If I win one great. if not, that's OK too. I hope we are all having fun here and keeping this thread toward the front.
I'm certainly enjoying myself.
I'm certainly enjoying myself.
I'm never going to win one
I said something similar on the 15 million contest thread . And guess what? I was the third winner. So be positive!
That's priceless
Good morning !
If Innokin can verify that FedEx will be the carrier once in the USA, then the address provided will work. Same with DHL, UPS.
Please respond & we can work this out, it cant be too difficult.
Thank you Innokin.
JC
If Innokin can verify that FedEx will be the carrier once in the USA, then the address provided will work. Same with DHL, UPS.
Please respond & we can work this out, it cant be too difficult.
Thank you Innokin.
JC
Hello everyone,
Just a little request from us at Innokin.
We'd love it if the winners could post photos within this thread of themselves with the branded ECF Disrupter & InnoCell they've won, it would be awesome to see you guys with the devices. If you're camera shy, a simple handcheck would do!
We'll also post the pictures, on our social sites like Instagram and Pinterest.
Also for anyone wondering where you could pick up the Disrupter and InnoCell here's a link.
PVS & Mods | Innokin Disrupter Box Mod | VaporBeast
Thank you!
I would be more than happy to show and share my pleased self holding a shiny Disruptor and InnoCell if I'm lucky enough
Fingers crossed
Hey, @redrebel821, those two non-working ego twist batteries of mine are now WORKING! haha @hittman offered to give them a go in the 'fixing' department and he nicely reports they're both working now (after a charge)! Fixed the alignment of the board behind a non-working button in one and resoldered a wire or two in the other that never worked for me. I'm ever so grateful of his time and effort to fix these (in his busy schedule with kids going off to college soon and normal family financial issues as kids grow up). Thanks again, @hittman !!
NancyB
If only you were located in the U.K. and not KY....I would negotiate a trade for a couple cases of Tanqueray #10 but ya'll down there have only whiskey!....So the Disrupter remains here and I buy my Gin as well I guess!.....And this photo/post IS Priceless!My shameless begging hand check
I seen where some people including myself have missed some of the post in here
So I wanted to repeat something I already said to make sure the new owners of the Disrupter see it.
@dcfluegel @10x sugar @Bad Ninja @applata32 @Bovinia @amoret @Dareynolds @rbye05 @jcco @zelda @Uncle
@Utsuru @cooladdict @Ladybear @ChiBear85 @Panorama911 @-Redd- @bellastarr @CountBoredom @Oregon Linda
This is only my opinion and I don't work at Innokin.
No. 1 Never charge the Disrupter using the cigarette lighter outlet in a Automobile. (This comes straight from Innokin)
I personally ruined a few Droid Razr Max batteries (which are integrated) before Motorola told me that I should only charge my smartphone using my car cig lighter in a emergency only.
I was even using a Motorola car docking station designed just for the Razr My batteries in my Razr went from holding a 2 day charge down to holding a 6 hour charge.
Power Surges can screw up Mods with internal batteries, well they can screw any electrical device up
I seen where a MVP 2.0 that could hold a charge for 2 days, all the sudden could only hold a 4 hour charge, due to the person plugged it into the same outlet a refrigerator was plugged in at.
If your lights in your house randomly go dim this is a power surge. Large appliances like refrigerators, heaters, and air conditioners can cause surges.
I personally don't use my computer to charge anything.
I would strongly advise on getting a Innokin iTaste Wall to USB - 1000mA adapter and a surge protector power strip.
I gave that link so you could see what I was talking about. You can google search for a cheaper price, they normally around $5.
Be real careful using any smartphone adapter to charge any of your mods. Some smartphone adapters can put out 2000mA up to 4000mA.
The output should be marked on the adapter.
I have gotten 2 generic USB wall adapters, one burned up first time I used it and the other one only puts out 500mA even though it says output 1000mA.
I'm not saying you have to get a Innokin but try to get one with a name brand you know and trust on it.
Surge protectors power strip with USB ports on them, Make sure the USB ports can handle 1000mA output.
I got one of these but when I plug a mod in that pulls a 1000mA it shuts the USB port off.
Try never to leave any mod in a hot car. You can google this and see the pictures of what happens when someone does this
Congrats again to you all.
So I wanted to repeat something I already said to make sure the new owners of the Disrupter see it.
@dcfluegel @10x sugar @Bad Ninja @applata32 @Bovinia @amoret @Dareynolds @rbye05 @jcco @zelda @Uncle
@Utsuru @cooladdict @Ladybear @ChiBear85 @Panorama911 @-Redd- @bellastarr @CountBoredom @Oregon Linda
This is only my opinion and I don't work at Innokin.
No. 1 Never charge the Disrupter using the cigarette lighter outlet in a Automobile. (This comes straight from Innokin)
I personally ruined a few Droid Razr Max batteries (which are integrated) before Motorola told me that I should only charge my smartphone using my car cig lighter in a emergency only.
I was even using a Motorola car docking station designed just for the Razr
My batteries in my Razr went from holding a 2 day charge down to holding a 6 hour charge. Power Surges can screw up Mods with internal batteries, well they can screw any electrical device up
I seen where a MVP 2.0 that could hold a charge for 2 days, all the sudden could only hold a 4 hour charge, due to the person plugged it into the same outlet a refrigerator was plugged in at.
If your lights in your house randomly go dim this is a power surge. Large appliances like refrigerators, heaters, and air conditioners can cause surges.
I personally don't use my computer to charge anything.
I would strongly advise on getting a Innokin iTaste Wall to USB - 1000mA adapter and a surge protector power strip.
I gave that link so you could see what I was talking about. You can google search for a cheaper price, they normally around $5.
Be real careful using any smartphone adapter to charge any of your mods. Some smartphone adapters can put out 2000mA up to 4000mA.
The output should be marked on the adapter.
I have gotten 2 generic USB wall adapters, one burned up first time I used it and the other one only puts out 500mA even though it says output 1000mA.
I'm not saying you have to get a Innokin but try to get one with a name brand you know and trust on it.
Surge protectors power strip with USB ports on them, Make sure the USB ports can handle 1000mA output.
I got one of these but when I plug a mod in that pulls a 1000mA it shuts the USB port off.
Try never to leave any mod in a hot car.
You can google this and see the pictures of what happens when someone does this Congrats again to you all.
It doesn't seem to have a built in, plugged into the wall mod in it. I suggested a power supply that has all the newest stuff and stupid power that sits on a table for when you are working at a desk. I would love a desk top mod that didn't require batteries. A few places for atomizers, a couple spots for bottles of juice, and a cord to a hand held handle with a 510 connector.
Look at the last drawing, how many of us was there that gave answers? Not a whole lot and I still lost
I am the Charlie Brown of contest
Never say never, Fringe Chief. This is the first contest I've ever won, so you could be next!
The new dna200 board has a 12 volt power supply option instead of batteries... You could build a nice vape station with that
- Status
Similar threads
- Locked
- Locked
