I-Atty Clone (Glass tank)

[Heavyrocker]

I just did a .50 ohm wrap with SS cable rope and this tank is well worth 16 bucks.It looks pretty good too,resembles the RSST.Im vaping FA coconut DIY at 12 mg and it tastes better than the RSST,dont know why tho,i was conserned about the black gaskets in I atty cause it does contact the juice in the tank.Its a little top heavy,the top cap is really thick SS,im afraid to drop it on my hardwood floor,may dent the wood.My AGA is now collecting dust.Another thing i was concerned about is the wicks sits very close to the center top post but i dont think it will cause a short cause the wick and post are both positive.I didnt drill out the air hole either,i like a tight draw.PERFECT.

https://www.fasttech.com/products/1413900

Wick is close too post,but it works fine.



I got a decent even glow going,very easy too set up this bad girl.



The I-Atty clone on the Sent- V3.

 

[Busted knuckles]

I cant tell fron the pics, does the tank slide off the top like a zen or does the deck screw down to hold the tank on like an aga?

 

[Heavyrocker]

I cant tell fron the pics, does the tank slide off the top like a zen or does the deck screw down to hold the tank on like an aga?

Slide on,screw top caps are history.The seal is not the tightest,no leaks but the RSST seal is perfect.Im happy with this I-Atty,id buy again.I just fixed the ''loose'' seal at the top cap,2 strands of dental floss underneath the rubber gaskets,now tight as a drum.BTW...this tank is heavy as hell,at least its SOLID.The glass tank is also thick and the edges are smooth.

 

[JayTater]

The glass is incredibly thin on the I Atty. Its a great budget Genny, but it is VERY easy to break the glass.

 

[Heavyrocker]

Mine is thick as the AGA tank,almost,its not as thin as some are saying,maybe they made it thicker.

 

[Heavyrocker]

UPDATE: This tank is pain in the rear,it dont work to good with a SS cable wick and the center post is too close too the wick hole,after 2 days i dont like,would not buy again.Its built like a rock but i love the RSST,me thinks the insulator in t RSST wick hole makes all the diff.Also dont loke the way the rubber gaskets sit in the juice,piece of junk.

 

[tincbtrar]

I liked this Atty for a few days too...but my main concern is how the top cap started changing color underneath the cap (where vapor is produced).

I'm guessing that you used 3/32 ss rope in there (as I did...it had little room as well).

Maybe trying the smaller size would be a better idea.

Sent from my Xoom using Tapatalk 4

 

[Heavyrocker]

UPDATE:

I guess im impatient sometimes,i just re-wrapped this bad girl again and now seems all ok,best way too wrap is remove the top postive post chunky spacer and wrap the wick,i can get the wire away from the post better,now i think the closer post to the wick hole is for a reason,less hot spot issues,only thing i dont like is the 510 threading is a tad small but does grip the mods threads and goes down tight,for 15 bucks im not complaining,i give er a few more day but now im happy with it again.It looks beautiful and rock solid.