I'm sure that is true about the choice of material used in the manufacturing. Where did you find good wick at?
- Status
Pbdragon. I've never heard of this vendor before. I was reading a thread about good silica and this guy who was a member since 2009 said it was the best he tried so considering how long he's been at this I gave it a shot. It doesn't fray and easy to work with. It wicks well. When I separate it the separate pieces seem to be of great quality. I make 4.5mm coils with no flavor wicks. So it's great for my use. The German silica is supposed to be top notch I haven't tried it yet.
Ok I'm confused about a fasttech product
http://www.fasttech.com/products/0/10004696/1361500-mt3-electronic-cigarettes-atomizer-heating-core
As far as I can tell this looks like evod heads mt3 are not built like this would this be a evod head??
http://www.fasttech.com/products/0/10004696/1361500-mt3-electronic-cigarettes-atomizer-heating-core
As far as I can tell this looks like evod heads mt3 are not built like this would this be a evod head??
Thanks Eddardin, I shall resized it and insert. Oh, erm, you know what I mean. Right now is Monday morning however.
Must have coffee.
Yes, probably, although it's likely to be quite mild. No problem really, it's more of an observation. I haven't worked out exactly the how and why yet though. Do you own a multimeter?
Coffee's not made yet, and I have to go to work. Oh, the inhumanity!
I'm off in an hour or so to a graduation party I'm dreading. Sunday is usually my rest day before work. Thankfully I have my smart phone to mess around on here and plan my next fasttech order.
I'm not used to going to family functions all the time. My family is spread all over the country so the get togethers are far and few between. So seeing my wife's family often is odd. I'll have to go to the bathroom to vape so I'll be in there often. Maybe they'll think the food got me sick lol.
I'm not used to going to family functions all the time. My family is spread all over the country so the get togethers are far and few between. So seeing my wife's family often is odd. I'll have to go to the bathroom to vape so I'll be in there often. Maybe they'll think the food got me sick lol.
Last edited:
Probably. They would work in the Protank as well, I think. Some people are using the evod head in the Protank to tighten up the draw a little bit.
Any of the knock-off devices with coils seem to have a high failure rate. Maybe one in five DOA or close to useless. Figure that into your costing as well. Sounds like you've got a better supplier anyway.
Yup, when fasttech first added the evods they called them mt3. Like a day later they changed the name to Evod.
Good morning Caterpillars! Time for me to get caught up.
All hail Sir Ferrell! As of late I have become less averse to the bounties of your land. Last eve I summoned a blue Protank to my court.
Whilst I am appreciative of your desire to learn our tongue, and commend your efforts thus far, she is in fact Duchess DYI (Do Yourself It).
A grievous error on my part. I hope Her Grace Duchess DIY shall forgive me this trespass.
My Lord, might I so humbly suggest you consider an account with photobucket or imageshack so that your wisdom and wit would be more visible to the aged eyes of those who appreciate it most.
And so it goes. Like a circle in a spiral, like a wheel within a wheel
Never ending or beginning on an ever spinning reel
Like a snowball down a mountain, or a carnival balloon
Like a carousel that's turning running rings around the moon...
Alas, the poor OP probably should have been given a less complicated device, but her brother sent her an entire ProVari set up. He obviously loves her very much, but appears to have sent her the equivalent of a Ferrari when she doesn't know how to drive. I'm perplexed she didn't ask her brother for assistance. I wonder if he is a vaper? It's possible he isn't and just ordered for her what he heard was the "best" device.
Perhaps there should be a warning notice: If you have a Prothingy through no fault of you own, please refrain from mentioning it. Once you have 5 posts you can ask questions in the ProThingy sub-forum where you will not cause a flame war.
I don't. I don't like them. If you want to address the same issue, we could take turns starting a new thread. When the thread gets closed, the next person can start it again, with a slight variation so it will appear to be new. We can take side bets on how long it will take before the flaming begins.
I haven't bought from them, but I almost did (I don't remember what it was now). I did some background checking on them and they have a good reputation. Pretty good prices I seem to recall, they were just out of whatever it was I wanted.
I shall go make coffee now.
I tried to help that thread I put in my two cents about the bounty of kangerland. Easy to set up and easy to vape and easy to keep running. God I might be a fanboy :;
All hail Sir Ferrell! As of late I have become less averse to the bounties of your land. Last eve I summoned a blue Protank to my court.
A grievous error on my part. I hope Her Grace Duchess DIY shall forgive me this trespass.
My Lord, might I so humbly suggest you consider an account with photobucket or imageshack so that your wisdom and wit would be more visible to the aged eyes of those who appreciate it most.
And so it goes. Like a circle in a spiral, like a wheel within a wheel
Never ending or beginning on an ever spinning reel
Like a snowball down a mountain, or a carnival balloon
Like a carousel that's turning running rings around the moon...
Alas, the poor OP probably should have been given a less complicated device, but her brother sent her an entire ProVari set up. He obviously loves her very much, but appears to have sent her the equivalent of a Ferrari when she doesn't know how to drive. I'm perplexed she didn't ask her brother for assistance. I wonder if he is a vaper? It's possible he isn't and just ordered for her what he heard was the "best" device.
Perhaps there should be a warning notice: If you have a Prothingy through no fault of you own, please refrain from mentioning it. Once you have 5 posts you can ask questions in the ProThingy sub-forum where you will not cause a flame war.
I don't. I don't like them. If you want to address the same issue, we could take turns starting a new thread. When the thread gets closed, the next person can start it again, with a slight variation so it will appear to be new. We can take side bets on how long it will take before the flaming begins.
I haven't bought from them, but I almost did (I don't remember what it was now). I did some background checking on them and they have a good reputation. Pretty good prices I seem to recall, they were just out of whatever it was I wanted.
I shall go make coffee now.
Last edited:
No I don't wait I do somewhere I took one from the slumlord.
Your Highness:
I wholeheartedly support your continued insistence on this typo remaining the formal title of said Duchess.
This humble Lord fails to see how photobucket will help. Can you help this Lord see the light of your wisdom?
I agree. My luck in the standard forums is not good of late. I could aptly be called a "thread killer". Not that it will keep me from prowling them and roaring when I feel the need.
Just ask it, she loves how smart she looks in the face of such questions. (This does not in any way imply she is not just as smart as she looks, cause she is. She just likes looking that way)
Hey pancake showed up at post #27. I started reading the thread from the start. Gee haters hated on chelle so hardcore. I don't like most of my brothers and sisters in provari land.
Ok on any topper be it atty carto or clearo there is a bottom hole that sometimes leaks juice. I don't know why it's there. On different devices there are side air holes so I don't think it's there for air flow.
i really need to spend more time surfing FT....i am yet a mere grasshopper to chelle's FT Fu.....
- Status
Similar threads
- Locked
- Locked
