So I just ordered a provari and was looking for a tank to go along with it and I saw that a large amount of people use these IBTanks. I went on their website to kind of build my tank. How should I know what size to get, and what o rings to buy. But what is most confusing was there was not an atty anywhere I could see so I dont know what I would do with one of these tanks. So maybe if one of my fellow e cig members could help me out I can make sense of it and place an order with them tonight. Thanks everyone...... By the way, I would be lost in my vaping world if it wasnt for this forum. The help that the veterans give me and the time they take to do it is really nice. You only hear about bad news when you read the paper or watch the news, I know it isnt easy giving up your free time just to help a stranger you dont even know and if I could give out tips I would. Money tips not knowledge tips, it just goes to show that there really are still good people in the world. I am from New Jersey by the way. People are real a holes here, so its nice to see some kindness for a change.
IBTanked help
- Thread starter chicio
- Start date
- th_trl_thread_readers 0
-
- Tags
- litecigusa provari
- Status
Hi
I use the 19mm on my ProVari. I have both the standard and extra long. IBTanked sells a complete set with everything you need or you can buy the tube, caps and carto separately. When you buy the tube and caps (even if not the whole kit) they will come assembled.
When using carto tanks, you really need to get a tank tool. It's called different things by different vendors and may vary in design a bit (some are drip tip combos), but they make changing cartos and refilling very easy.
I use the 19mm on my ProVari. I have both the standard and extra long. IBTanked sells a complete set with everything you need or you can buy the tube, caps and carto separately. When you buy the tube and caps (even if not the whole kit) they will come assembled.
When using carto tanks, you really need to get a tank tool. It's called different things by different vendors and may vary in design a bit (some are drip tip combos), but they make changing cartos and refilling very easy.
You can order a complete IBTanked starter kit here: https://www.ibtanked.com/complete-tanks/stainless-steel-setup/19mm-xl-tank-detail
You will receive the pyrex tube, stainless steel endcaps, the proper fitting cartomizer (pre-punched), extra o-rings, and a combination drip tip/tank accessory tool.
Order additional pre-punched cartomizers here: https://www.ibtanked.com/accessories/cartomizers/smok-3-2-ohm-single-coil-2-hole-standard-detail
You'll need a drip tip (mouth piece) for each tank you order: https://www.ibtanked.com/accessories/drip-tips/ibtipsy
I did a review of the IBTanks in this link. I go over the ordering process in deciding what length and diameter tank to choose: http://www.e-cigarette-forum.com/forum/blogs/baditude/3318-3-ibtanked-pyrex-glass-tanks-review.html
If this will be your first cartotank, I also did a cartotank setup guide here: (5) Cartomizer Tank Setup - Blogs - E-Cigarette Forum
These are great tanks for a Provari. I have twelve.
You will receive the pyrex tube, stainless steel endcaps, the proper fitting cartomizer (pre-punched), extra o-rings, and a combination drip tip/tank accessory tool.
Order additional pre-punched cartomizers here: https://www.ibtanked.com/accessories/cartomizers/smok-3-2-ohm-single-coil-2-hole-standard-detail
You'll need a drip tip (mouth piece) for each tank you order: https://www.ibtanked.com/accessories/drip-tips/ibtipsy
I did a review of the IBTanks in this link. I go over the ordering process in deciding what length and diameter tank to choose: http://www.e-cigarette-forum.com/forum/blogs/baditude/3318-3-ibtanked-pyrex-glass-tanks-review.html
If this will be your first cartotank, I also did a cartotank setup guide here: (5) Cartomizer Tank Setup - Blogs - E-Cigarette Forum
These are great tanks for a Provari. I have twelve.
Last edited:
That is perfect. Thank you. Your number one on my help list. That is twice in a week. Lol
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Just got my first IBtanked for my Provari..........absolutely bliss! Finally a good Glass tank.....will order more! 
If you go to the caps on the website, you can use the drop down on any of the caps to get the complete package, which even comes with the filler drip tip, which works awesome!
Loooove my ibtank, 22mm standard length and use boge lr laser drilled from litecigusa
Loooove my ibtank, 22mm standard length and use boge lr laser drilled from litecigusa
I prefer the 22mm tank on my provari. A couple of pics to help you decide.
The first is a 22mm XL tank followed by a 19mm and a 22mm standard tank.
The 19mm tank is not from IBTanked. It is just a cheapo Smoktech tank.
The first is a 22mm XL tank followed by a 19mm and a 22mm standard tank.
The 19mm tank is not from IBTanked. It is just a cheapo Smoktech tank.
IBTanks should copy this and send it to anyone inquiring...
I sent them a note a week or two back asking pretty much the same question and was told just to purchase a complete tank. Which didn't really answer my question. YOU Sir (I assume) handled this magnificently...thank you!
I sent them a note a week or two back asking pretty much the same question and was told just to purchase a complete tank. Which didn't really answer my question. YOU Sir (I assume) handled this magnificently...thank you!
- Status
Similar threads
