Iclear 30 and Gorilla Juice
- Thread starter smoking-tater
- Start date
- th_trl_thread_readers 0
- Status
I love my iClear 30. I may get a little gurgle here and there but never had it so bad that I got juice in my mouth. I have heard of someone getting a faulty head that leaked. Do you have a replacement for the iClear head? They are pretty cheap if you do some searching.
Most importantly what is the PG/VG blend you are using?
Most importantly what is the PG/VG blend you are using?
I may be wrong but I don't think AVE gives the option to choose pg/vg levels. I just looked at my order and it doesn't specify the mix. With the I clear 30 and the pro tank what mix works best (the two tanks I have) going to try the GJ in my pro tank and see if it works better. Just an fyi I tried three different replacement heads in the iclear and all worked great at first then I start getting the juice under the cap and in my mouth you can see the juice in the top of the mouthpiece. I have checked all the o rings and everything is tight and secure. I'm not having any leaking issues it's just keeping the juice out of the mouthpiece is the problem. Thanks for all the advice and help.
Sent from my SM-T310 using Tapatalk 2
Sent from my SM-T310 using Tapatalk 2
My Iclear 30, was junk. I used it for a week and then it started leaking out of every imaginable orifice.
AVEjuice is 100% VG, meaning that it is pretty think. Most people have the opposite problem. The juice just sits there rather than coming out.
AVEjuice is 100% VG, meaning that it is pretty think. Most people have the opposite problem. The juice just sits there rather than coming out.
Are you tilting it? Don't fill all the way to the 3.0ml mark either. I use 100% VG exclusively and have never had many issues with the iclear 30. Tilt to get the wicks wet then vape without tilting. Check that your base connection is straight also. I had one that was offset so the coil was slanted slightly which caused juice to enter the mouth piece. That might be your problem.
DaleC
DaleC
The whole idea for me when i bought 2 -30's was because I got tired of having to refill the 16's which I love.
The 30's suck balls and leak like crazy from the bottom if you fill it to the top line (3ml)..it will leak and drain to halfway then stop leaking..Then you have to take it off and drain the catch well and wipe down the vamo from it overflowing from the well....it's crap. What good is the bigger 30 if you can't fill it up to where it's advertized.
Plus the plastic container turned all frosty white after first washing and I used the same juice I used with 16's.
Plus it taste horrible from the low grade metal they used.
The 30's suck balls and leak like crazy from the bottom if you fill it to the top line (3ml)..it will leak and drain to halfway then stop leaking..Then you have to take it off and drain the catch well and wipe down the vamo from it overflowing from the well....it's crap. What good is the bigger 30 if you can't fill it up to where it's advertized.
Plus the plastic container turned all frosty white after first washing and I used the same juice I used with 16's.
Plus it taste horrible from the low grade metal they used.
Made me laugh lol
I have problems with Protanks too. Removing a flavor wick, as a lot of people do, gives me gurgling, leakage from the bottom, and juice coming up the tip, once the protank is halfway empty.
Sticking with my Carto tanks instead. Have never had an issue with the boge cartos and tank set up.
Like others posted there may be an issue with your head not making a good seal. Give carto tanks a try and see how you like it, the Artemas tank from Madvapes is a really nice cheap one.
I really like the Artemas, probably a little better than the protank to be honest. Better flavor....
It's wacky...they only leak when filled to the 3ml mark then drain halfway and then they stop leaking.
I tried to make a tight seal and it leaked even worst.
Plus from tightening it to try to get a seal my other tanks wouldn't make contact with vamo anymore and had to adjust the screws on them to work again.
I don't think the vamo V2 has a floating pin head so I got worried it was damaged ,but thankfully adjusting my screw on bottom of my other tanks worked. Never had to adjust them before until this crappy iclear 30 messed my vamo head up.
Also..I don't see an adjusting screw on the botton of the iclear 30's like i have on other tanks.
I been reading other reviews and seems many people are having problems with them.
I tried to make a tight seal and it leaked even worst.
Plus from tightening it to try to get a seal my other tanks wouldn't make contact with vamo anymore and had to adjust the screws on them to work again.
I don't think the vamo V2 has a floating pin head so I got worried it was damaged ,but thankfully adjusting my screw on bottom of my other tanks worked. Never had to adjust them before until this crappy iclear 30 messed my vamo head up.
Also..I don't see an adjusting screw on the botton of the iclear 30's like i have on other tanks.
I been reading other reviews and seems many people are having problems with them.
I had issues with 2 of the heads that came on my iclear 30's, but the replacement ones have worked great. Anyone know where to find replacement heads cheap?
- Status
Similar threads
