Ive been looking to grab a iclear 30 due to the great reviews ive read. But it seems that every vendor I check are "out of stock" can somebody point me in the right direction on where to find one?
Thanks a million!
Thanks a million!
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
Gotvapes said yesterday on their Facebook page when I asked. That the iclear should be here in a week or so, the kanger pro is not shipping to the USA until second week of march.
As I'm in Europe I got it from a webshop in Spain, called pink-mule.com , looks like they got them early.
I will totally by me a few more of these, they are really good so far. Good weight with the SS parts, amazing flavor and can really take som power due to the dual coils.
Sweet. Thanks!As I'm in Europe I got it from a webshop in Spain, called pink-mule.com , looks like they got them early.
I will totally by me a few more of these, they are really good so far. Good weight with the SS parts, amazing flavor and can really take som power due to the dual coils.
I was cruising Vapor Joe's blog and he linked to them here: iClear30 Dual Coil Clearomizer « uniquecigs.com uniquecigs.com
I put an order in a few minutes ago. This thing is getting great reviews from many people.
I put an order in a few minutes ago. This thing is getting great reviews from many people.
Good find!
Here is a 10% off Coupon for Uniquecigs: vapeking10
$26.91 is pretty nice for two shipped!
Last edited:
Got mine today.
I'm really liking it. Flavor, vapor and TH does seem to be a little better than Vivi Novas, as I was able to go up some in wattage since it's a dual-coil.
If the price comes down (all new things seems to start out high and then level out after time), I can see myself sticking with this tank, over VN's and similar tanks. As it stands now, I only have the tank (came with 1 head) and 1 replacement head, and it came to $18.90 (and free shipping). I ordered before the discount code was posted above. That's pretty pricey, in comparison to VN's and their replacement heads. But again, once price comes down, I think this will be replacing VN's in my stash for good.
Thumbs up from me.
My only real gripe is how you can't use any other drip tip, but that's not a dealbreaker for me. Just an annoyance.
I'm really liking it. Flavor, vapor and TH does seem to be a little better than Vivi Novas, as I was able to go up some in wattage since it's a dual-coil.
If the price comes down (all new things seems to start out high and then level out after time), I can see myself sticking with this tank, over VN's and similar tanks. As it stands now, I only have the tank (came with 1 head) and 1 replacement head, and it came to $18.90 (and free shipping). I ordered before the discount code was posted above. That's pretty pricey, in comparison to VN's and their replacement heads. But again, once price comes down, I think this will be replacing VN's in my stash for good.
Thumbs up from me.
My only real gripe is how you can't use any other drip tip, but that's not a dealbreaker for me. Just an annoyance.
If I remember right, PBusardo used some BB in his iClear30 review, with success. It's a combined review of the iTaste SVD and the iClear30.
Ah, that's why I couldn't find it right away, it was mixed in with the iTaste review, thanks. Btw, I emailed phil about what he likes to use with BB and he responded, "A "well punched or slotted" carto tank, an iClear 30, one of these, a genny, or the ody. Take your pic. All good, all slightly different in behavior."
Either way, Bobas bounty is going to require you to keep an eye on your coil for carbon build up, there is something in this liquid (vendor is not clear on the ingredients)that does not vaporize completely and causes build up very fast.
I've had one for almost a week. When it works it's impressive. But I've had problems and I'm not sure if it's me if the iClear30 is just not meant for an eGo Twist or Vision Spinner. I believe the heads are 2.2 ohms. When I first juiced up, I got a very nasty metallic taste. So I washed and boiled the metal parts plus head. After that it kept flooding and gurgling. Called the vendor and he said Innokin acknowledge some of their bases were bad so vendor sends me another base plus two more heads. Got is yesterday and at first at 3.3w not much of a hit. Turned it up to about 3.8-4.0w and I got burned dry hits. Finally I realized that it was my draw. I'm used to vivi novas on a twist/spinner and i usually suck softly (hehe.) But with the iClear I have to take a more powerful draw. That's when I started getting great flavor and vapor. When I take softer hits, I get a dryer sometimes burnt taste and can sometimes see the coils heading up thru the tube and silicon atomizer cap. So I figured either there's not enough airflow to keep the coils wet with juice or it's just not wicking right.
This morning I wanted to change juices, so I washed it out (under cold water), dried the wicks and the rest of the clearo and filled it up. Complete disaster. Flooded and splashed my lips. Then I unscrewed it off my Spinner and juice had leaked on to the battery contact. ....ing hell.
I have no idea what i'm doing wrong. So, so far for me, the jury is out on this one. It could be that I'm a complete ....., as I've only been vaping for a month. I'm willing to give it more time as I really want it to work the way it should. If anyone has any suggestions or tips that would be most helpful.
This morning I wanted to change juices, so I washed it out (under cold water), dried the wicks and the rest of the clearo and filled it up. Complete disaster. Flooded and splashed my lips. Then I unscrewed it off my Spinner and juice had leaked on to the battery contact. ....ing hell.
I have no idea what i'm doing wrong. So, so far for me, the jury is out on this one. It could be that I'm a complete ....., as I've only been vaping for a month. I'm willing to give it more time as I really want it to work the way it should. If anyone has any suggestions or tips that would be most helpful.
I think but am not positive that the iclear 30 is supposed to be used at higher voltage because it is dual coil?
I haven't had problems with it on my vamo
but I haven't tried it on my twists because I read that somewhere...
I haven't had problems with it on my vamo
but I haven't tried it on my twists because I read that somewhere...
You seem to be connected with this company. Unless you register as a supplier, you risk being banned.
I got the same results as "aka.robo" using the iclear 30 on my twists... nasty burnt metallic taste and gurgling.
You must be right about not having enough power to fire the dual coils. I was ready to throw it away but now I'll wait. I have an Evic on the way and will give it another try.
Don't throw it away. I had read somewhere people getting better results at 10 watts. So I decided to revisit the iClear30 last week with a new atomizer head. 10 watts, on both an eVic and a Vamo. Two tanks later and it's working fairly consistently now. That's about 4.5 - 4.6v. I don't think I even went that high when I was using just the spinner. So wait for your eVic and give it another whirl.
- Status
Similar threads
- Locked
- Locked
