IJOY EXO SERIES TANKS (EXO S, EXO X, EXO XL, EXO RTA)

[TrollDragon]

OT, but too hyped not to post!

My signed Gun Metal Plus arrived, sorry for the poor webcam picture...

 

[janne303]

Am I in the Supreme thread?

Skickat från min SM-G935F via Tapatalk

 

[TrollDragon]

Nope, we were just talking about another EXCELENT atomizer.

 

[nicnac]

What material is the coil that comes with exo?

 

[TrollDragon]

What material is the coil that comes with exo?

I didn't even know it came with coils, didn't look.

 

[Herrick]

I've been getting a really nice vape out of this tank over the past couple days with rayon in a 24 gauge SS316 3.5mm ID coil. With the restrictor in & the airflow slightly open, I'm getting a Merlinesque tight draw, a nice warm vape, and a slightly sharp throat hit. Temperature is set to 450F and wattage is at 34.5.

 

[TrollDragon]

I've been getting a really nice vape out of this tank over the past couple days with rayon in a 24 gauge SS316 3.5mm ID coil. With the restrictor in & the airflow slightly open, I'm getting a Merlinesque tight draw, a nice warm vape, and a slightly sharp throat hit. Temperature is set to 450F and wattage is at 34.5.

Great to hear!

 

[Heartsdelight]

OT, but too hyped not to post!

My signed Gun Metal Plus arrived, sorry for the poor webcam picture... View attachment 646389

Congratulations on the win!

 

[Heartsdelight]

I've been getting a really nice vape out of this tank over the past couple days with rayon in a 24 gauge SS316 3.5mm ID coil. With the restrictor in & the airflow slightly open, I'm getting a Merlinesque tight draw, a nice warm vape, and a slightly sharp throat hit. Temperature is set to 450F and wattage is at 34.5.

Yay!!!

 

[TrollDragon]

Congratulations on the win!

I thank you!
The upgraded top cap is excellent! Running it in 5ml mode at the moment, but I can see it going to 10 rather quickly.

 

[Heartsdelight]

I thank you!
The upgraded top cap is excellent! Running it in 5ml mode at the moment, but I can see it going to 10 rather quickly.

Enjoy it!

 

[ShowerHead]

I've been getting a really nice vape out of this tank over the past couple days with rayon in a 24 gauge SS316 3.5mm ID coil. With the restrictor in & the airflow slightly open, I'm getting a Merlinesque tight draw, a nice warm vape, and a slightly sharp throat hit. Temperature is set to 450F and wattage is at 34.5.

Excellent! Glad to hear it.

 

[Herrick]

I've gotten a little bit of leaking after refilling the tank. But it's so minimal that it's not even coming out through the air flow. I could see the liquid through the air flow. So I just closed the juice flow and vaped that thing till the airflow looked dry.

I guess my wicking isn't quite right but hell, it's been vaping so good lately. I don't want to mess with it. And after dealing with two Merlin RTAs that always seep, this is nothing.

 

[Vaperx]

Still running great after all these weeks. Not a single leak still and using the single deck. Have the Pharaoh coming very soon and will compare. Been excellent though

 

[tac_driver]

What do you think about the Phillips head screws?
have any of you stripped them yet?

 

[Heartsdelight]

What do you think about the Phillips head screws?
have any of you stripped them yet?

Not yet but I've only built it once

 

[ShowerHead]

What do you think about the Phillips head screws?
have any of you stripped them yet?

I did, but replaced all with the right hex screws.

 

[TrollDragon]

iJoy and other companies need to get away from the Phillips heads screws and go back to hex, or at least make the Phillips heads hardened.

I would like to see hardened Torx T6 heads on all post screws.

 

[Herrick]

What do you think about the Phillips head screws?
have any of you stripped them yet?

I've done a few builds and haven't stripped them but I do not like them at all.

Anyone know which one of these are the right hex screws?

Metric - M3 - Screws - Fasteners -  The Home Depot

 

[tac_driver]

what size grub screw (hex) does it take?
I already have 2.5x3mm and 3.0x3mm