IJOY Releases Two New Tanks - Goodger and Tornado
- Thread starter 100%VG
- Start date
- th_trl_thread_readers 0
-
- Tags
- ijoy tornado rdta
- Status
Doesn't the Tornado look like a Beast?!
From what I was told, the Hex Deck is an optional component.I have a Goodger on the way. May have a Tornado coming soon.
.
BEAST OF THE NATION BRODoesn't the Tornado look like a Beast?!
I have a Goodger on the way. May have a Tornado coming soon.
.
Goodger Tank
Means that the airflow comes into the Head, flows down, up, and through the coil. It is not meant to imply a spiral airflow.
Description:
Stainless Steel Construction (don't know type of SS yet)
Black Finish or SS Finish
Side Filling Top Port
SS316L Heads: 0.6Ω 20W-40W and 0.4Ω 40W-60W
Capacity: 4.5ml
Dimensions: 22.6mm x 63.8mm
Pyrex Glass Tube
Spare Pyrex Glass Tube (?)
Wide Bore Tip included
O-Ring Colors: Red, Black, and maybe Clear
Disassembles for Easy Cleaning
Tornado RDTA
Description:
Stainless Steel Construction (don't know type of SS yet)
Black Finish or SS Finish
Side Filling Top Port with Lock Function:
Capacity: 5ml
Dimensions: 24mm with 17.8mm Deck
Pyrex Glass Tube
Spare Pyrex Glass Tube (?)
Chuff Drip Tip included
O-Ring Colors: Red, Black, and maybe Clear
Disassembles for Easy Cleaning
.
Means that the airflow comes into the Head, flows down, up, and through the coil. It is not meant to imply a spiral airflow.
Description:
Stainless Steel Construction (don't know type of SS yet)
Black Finish or SS Finish
Side Filling Top Port
SS316L Heads: 0.6Ω 20W-40W and 0.4Ω 40W-60W
Capacity: 4.5ml
Dimensions: 22.6mm x 63.8mm
Pyrex Glass Tube
Spare Pyrex Glass Tube (?)
Wide Bore Tip included
O-Ring Colors: Red, Black, and maybe Clear
Disassembles for Easy Cleaning
Tornado RDTA
Description:
Stainless Steel Construction (don't know type of SS yet)
Black Finish or SS Finish
Side Filling Top Port with Lock Function:
Twist right and pull up to fill on top side
Push down and twist left to lock closed
Two Velocity-style Post Holes:Push down and twist left to lock closed
Two Posts with 4 Holes for Quad Coils (Standard - Included)
Two Posts with 6 Holes for Six Coils (Optional Build Deck - Sold Separately)
Four Large Juice Flow HolesTwo Posts with 6 Holes for Six Coils (Optional Build Deck - Sold Separately)
Capacity: 5ml
Dimensions: 24mm with 17.8mm Deck
Pyrex Glass Tube
Spare Pyrex Glass Tube (?)
Chuff Drip Tip included
O-Ring Colors: Red, Black, and maybe Clear
Disassembles for Easy Cleaning
.
IJOY Tornado 300W Capable Two Post RDTA
Tornado --- “RDA” without dripping
IJOY Tornado 300W capable Two Post RDTA aims directly at a recreating a high powered RDA experience with the benefits of a tank reservoir. The Tornado T4 build deck features a two post design with two 2mm diameter terminal per post, allowing for easy mounting of dual coil builds. With optional Tornado T6 two post 6 holes optional deck, high power builds driven up to 300W can be achieved with steady wicking rates.
Combining a wide surface area 15mm by 2mm dual adjustable airflow with dual 5mm diameter inner air holes, a two post build deck, and quad 5mm diameter wick ports that result in staggering overall capability.
Using the convenient Slide & Lock gasket-sealed side top fill design, users can easily fill the 5ml tank capacity, and it is leak free.
For maximum conductivity, a 24K Gold Plated Center Pin features a direct to contact design resulting in minimal voltage drop due to the lack of redirection of electrical current.
To feed the potential of the system, dual 15mm by 2mm air slots direct airflow into two 5mm diameter air holes located in the build deck, allowing for absolutely massive vapor production. The wide area airflow also delivers cooling to a wider surface area in the subdeck, effectively cooling the entire system.
The chassis of the Tornado RDTA is manufactured utilizing 304 Stainless Steel, providing a heft and durability to be expected from a flagship tank.
Combining the form factor and capability of a RDA with the reservoir of a tank, the Tornado 300W Two Post RDTA by IJOY is a high performance platform designed for extreme vapor chasing.
Product Features:
24mm Diameter
5ml Capacity
17.8mm Two Post Build Deck
PEEK Insulator
Direct to Contact 24K Gold Plated 510
Wide Surface Area Cools Entire Subdeck and Deck of RDTA
Convenient sliding & Lock gasket sealed top side filling
Delrin Wide Drip Tip
High Quality Stainless Steel and Glass Construction
Capable Accessories:
Product Includes:
One IJOY Tornado T4 Deck Two Post RDTA
Additional Hex Keys, Screws, and O-Rings
510 Drip Tip Adapter
Tornado --- “RDA” without dripping
IJOY Tornado 300W capable Two Post RDTA aims directly at a recreating a high powered RDA experience with the benefits of a tank reservoir. The Tornado T4 build deck features a two post design with two 2mm diameter terminal per post, allowing for easy mounting of dual coil builds. With optional Tornado T6 two post 6 holes optional deck, high power builds driven up to 300W can be achieved with steady wicking rates.
Combining a wide surface area 15mm by 2mm dual adjustable airflow with dual 5mm diameter inner air holes, a two post build deck, and quad 5mm diameter wick ports that result in staggering overall capability.
Using the convenient Slide & Lock gasket-sealed side top fill design, users can easily fill the 5ml tank capacity, and it is leak free.
For maximum conductivity, a 24K Gold Plated Center Pin features a direct to contact design resulting in minimal voltage drop due to the lack of redirection of electrical current.
To feed the potential of the system, dual 15mm by 2mm air slots direct airflow into two 5mm diameter air holes located in the build deck, allowing for absolutely massive vapor production. The wide area airflow also delivers cooling to a wider surface area in the subdeck, effectively cooling the entire system.
The chassis of the Tornado RDTA is manufactured utilizing 304 Stainless Steel, providing a heft and durability to be expected from a flagship tank.
Combining the form factor and capability of a RDA with the reservoir of a tank, the Tornado 300W Two Post RDTA by IJOY is a high performance platform designed for extreme vapor chasing.
Product Features:
24mm Diameter
5ml Capacity
17.8mm Two Post Build Deck
PEEK Insulator
Direct to Contact 24K Gold Plated 510
Wide Surface Area Cools Entire Subdeck and Deck of RDTA
Convenient sliding & Lock gasket sealed top side filling
Delrin Wide Drip Tip
High Quality Stainless Steel and Glass Construction
Capable Accessories:
- Tornado Top Airflow Section. Airflow traveling down to hit the coils directly. More airflow, more vapor! Which is a definitive must buy for build enthusiasts and advanced users.
- Tornado T6 Deck. Two post deck with three 2mm diameter terminal per post. A potential for various building.
Product Includes:
One IJOY Tornado T4 Deck Two Post RDTA
Additional Hex Keys, Screws, and O-Rings
510 Drip Tip Adapter
They look pretty nice. I'm still wanting to get a Griffin, though. lol
6 coils in one tank? What's next, hooking it up to a car battery
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
That 300W could easily be done by a triple series 18650 stack Box Mod with 3 Sony VTC4.
(12V)² / 300W = 0.48Ω
0.48Ω = 6 x 2.88Ω coils in parallel
12V / 0.48Ω = 25 Amps
300W into 6 coils is only 50W per coil.
It's just amazing how things have changed, and I'm actually glad. I used to get reamed years back using 28g wire and using a .8 ohm single coil. People always said it was too low and dangerous.
Sent from my SCH-I545 using Tapatalk
Well things have certainly changed a lot. If I had a MOSFET Box Mod, like in the example, I would try it. Again, it's only 50W per coil. Tons and tons of vapor, but not hot.
The ejuice companies are loving it too. I know if I vaped that set up, I would have to diy for sure.
Sent from my SCH-I545 using Tapatalk
Nice! thanks for sharing 
its funny cus back in july 8months a go i made a thread asking are there any tanks that will work at around 0.1ohms and now we have a few, even funnier is the juice they can get through, not that it bothers us diy'ers
its funny cus back in july 8months a go i made a thread asking are there any tanks that will work at around 0.1ohms and now we have a few, even funnier is the juice they can get through, not that it bothers us diy'ers
0.1? Very close to a dead short and no room for error.Nice! thanks for sharing
Sent from my SCH-I545 using Tapatalk
But 0.1Ω is where Temp Control works. It depends on the wire type as to how hard it is to accurately get that low. TC can work down to 0.05Ω.
Absolutely and I agree. My bad, I just was talking and thinking of those 6 Clapton ' s when the other post came in.
Sent from my SCH-I545 using Tapatalk
They do look massive, but if they are Kanthal, they are for something like competition vaping. And they could also be TC wires in Clapton Coils, like SS 316L or Titanium. I think it would be hard to get a workable TC build with Ni200, unless it had a Kanthal or Ni80 core. I probably wouldn't try Claptons for more than a dual coil myself. But the mental image is astounding.
.
Yes it would be on a single 18650 but i use dual & triple parallel mod's and my 200w snowwolf will fire coil's as low as 0.05ohms, lol maybe i should have said
Crazy!Yes it would be on a single 18650 but i use dual & triple parallel mod's and my 200w snowwolf will fire coil's as low as 0.05ohms, lol maybe i should have said
Sent from my SCH-I545 using Tapatalk
- Status
Similar threads
- Locked
