iJust S 2 not hitting.

[Denise Powell]

Hello,
I'm new here and I ran across an issue with my iJust S 2. I replaced the tank due to leaking and now it will not hit. I even put old tank back on. When I replaced the coil it hit once and then stopped again. Has this happened to anyone else and do you have any advice as to what may be wrong.

Thanks in advance!

 

[Topwater Elvis]

Is it charged & turned on?
Is both side of the 510 connection clean dry & shiny?
Q tip saturated with rubbing alcohol, scrub the 510 connectors & all threaded areas, dry thoroughly.
The center pin in the 510 connection may have become depressed from over tightening the delivery device 'tank' or if the other tank you tried had a longer/extended center pin that could've pushed it out of contact range.
You can try gently prying up the center pin in the power device, just a little.

 

[BrotherBob]

Hello,
I'm new here and I ran across an issue with my iJust S 2. I replaced the tank due to leaking and now it will not hit. I even put old tank back on. When I replaced the coil it hit once and then stopped again. Has this happened to anyone else and do you have any advice as to what may be wrong.
Thanks in advance!

Welcome and glad you joined. Recommend start all over again after reading below. Might have to contact vendor if persists.
Might like to read:
Tank Flooding Explained | Learning Center | VaVaVape
Tank type atomizers... For new vapists - how they work | E-Cigarette Forum