iJust S battery

[VapeonLivelong]

Hey guys,
I'm using iJust S with an ecr coil reading. 6 ohms.
Yesterday I had kept the battery for charging, I may I have over charged it.
When I tried to fire it, the light on the fire button starts to flash continuously.
What could be the reason?
Please note that the battery is fully charged.

 

[Ben85]

Hey guys,
I'm using iJust S with an ecr coil reading. 6 ohms.
Yesterday I had kept the battery for charging, I may I have over charged it.
When I tried to fire it, the light on the fire button starts to flash continuously.
What could be the reason?
Please note that the battery is fully charged.

I would move this post to a different forum as this section is for mechanical mods.

 

[lamensterms]

Yep, posted in the wrong section.

Could be a shorting or improperly installed coil. Or maybe juice in your mod.

Try taking the tank apart, cleaning it (including the outside of the 510 connection). Install a new coil, clean the 510 connection on the mod,and try again.

 

[VapeonLivelong]

My apologies!
Not quite aware which section do I move this query to and how do I move it.
I have changed the coil and it works fine on the Ego one 2200mah.
The issue seems to be with the iJust S battery and there's no way of opening it.

 

[lamensterms]

A forum admin would have to move it, I believe. No big deal.

Unfortunately those iJust mods are not easily dismantled. I wouldn't recommend opening it without the proper know-how. How long have you had your iJust for? Did you buy it brand new? Your could try reach out to eLeaf, or the vape shop you bought it from. Try get a replacement.

 

[VapeonLivelong]

A forum admin would have to move it, I believe. No big deal.

Unfortunately those iJust mods are not easily dismantled. I wouldn't recommend opening it without the proper know-how. How long have you had your iJust for? Did you buy it brand new? Your could try reach out to eLeaf, or the vape shop you bought it from. Try get a replacement.

Bought it in Nov 2016.
Yes it brand new.
I am not keen on opening it as i am not well versed and i dont want my mood blasting on my face

 

[SupplyDaddy]

Hey guys,
I'm using iJust S with an ecr coil reading. 6 ohms.
Yesterday I had kept the battery for charging, I may I have over charged it.
When I tried to fire it, the light on the fire button starts to flash continuously.
What could be the reason?
Please note that the battery is fully charged.

I think you need to learn about the devices you use. Depending on exactly how your device is flashing tells you what is wrong with it.

"Atomizer Protection: When vaping time exceeds 15 seconds, the device shuts off
automatically with the white button light flashing 10 times.
Short-circuit Protection: When the resistance is less than 0.15ohm, short-circuit
occurs with the white button light flashing 3 times.
No Atomizer Protection: The white button light will flash slowly when the button is
pressed down without atomizer connected.
Low-voltage Protection: When the voltage of the device is below 3.3V, the white
button light will flash 40 times. At the same time, the device won’t turn on."

eleafworld.com - eleaf,ismoka,istick,ijust,lemo,melo,help,lemo2