I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

[supertrunker]

15A fuse works fine for me. Paperclip was one of those "fix it quick" things. But good to know! In my Dibi - if it autofires, i notice it when i do. It's not a build that exceeds the rating of a 30A battery.

[today it's a 24g duals at 0.3] i don't see the Dublin as an ADV, pocket carry device like a Dibi, because i already know what i'd wrap on it, and i'd keep my beady eyes on it all the time. A bit like HRH with the TV remote - take the batteries out when i leave!

T

 

[Vapeaholic]

15A fuse works fine for me. Paperclip was one of those "fix it quick" things. But good to know! In my Dibi - if it autofires, i notice it when i do. It's not a build that exceeds the rating of a 30A battery.

[today it's a 24g duals at 0.3] i don't see the Dublin as an ADV, pocket carry device like a Dibi, because i already know what i'd wrap on it, and i'd keep my beady eyes on it all the time. A bit like HRH with the TV remote - take the batteries out when i leave!

T

I work at home most days and the Dublin will stay on my desk. The wife wouldn't appreciate the clouds since she doesn't vape. So far I'm using the soft o-ring to keep the rod from making accidental contact while I'm getting used to it. Still takes a pretty light pull but keeps the rod centered.
Ordered some 24 and 22ga wire. Biggest I have now is 26 so I'm running twisted 26ga at the moment.

 

[pdib]

Peter, the only thing bad about the Dublin' so far...
It makes my BFers seem a bit anemic. I'm gonna have to go all ST on em and crank up the heat. Prolly have to install the BYFO strip on the Sumpin'.

what kind of a build do you have in the Plumber's V atty?

oh .. . . nevermind.

 

[pdib]

I just rebuilt one of my Nuppin's with another 26 g dual. My fancy new ohmmeter said .33Ω. Steamkitchen says .31Ω (there's that .02+)

What have you got on your bf mod there, Mr. H.?

 

[Vapeaholic]

what kind of a build do you have in the Plumber's V atty?

oh .. . . nevermind.

Dual twisted 26ga 6 wraps. A pretty conservative .28ohms.

 

[Kentastic]

NO WAAAAAAAYYYYYYYY!!!!!

Way....

 

[pdib]

15A fuse works fine for me. Paperclip was one of those "fix it quick" things. But good to know! In my Dibi - if it autofires, i notice it when i do. It's not a build that exceeds the rating of a 30A battery.

[today it's a 24g duals at 0.3] i don't see the Dublin as an ADV, pocket carry device like a Dibi, because i already know what i'd wrap on it, and i'd keep my beady eyes on it all the time. A bit like HRH with the TV remote - take the batteries out when i leave!

T

Yeah, basically the difference in v-drop between the BeCu strip and the fuse would be noticeable by someone who does a tune-up and v-drop test daily. Just the slightest bit of neglect (read as ordinary use) will negate that difference. The only reason I run the strip is because I'm hoping to blow my face off someday.

 

[Vapeaholic]

I just rebuilt one of my Nuppin's with another 26 g dual. My fancy new ohmmeter said .33Ω. Steamkitchen says .31Ω (there's that .02+)

What have you got on your bf mod there, Mr. H.?

That crappy modified MM I posted a few days ago. Single @ .52 ohms. Not happy with it so it's coming out tomorrow. Probably go with something similar to what's on the Dublin.

 

[supertrunker]

I work at home most days and the Dublin will stay on my desk. The wife wouldn't appreciate the clouds since she doesn't vape. So far I'm using the soft o-ring to keep the rod from making accidental contact while I'm getting used to it. Still takes a pretty light pull but keeps the rod centered.
Ordered some 24 and 22ga wire. Biggest I have now is 26 so I'm running twisted 26ga at the moment.

It's the flu season - tell her PG kills germs! It's for their own protection, since you care so much about them....

24g is pretty good, i find it takes a day to really break in and then it rocks.

T

 

[Vapeaholic]

I'm hoping to blow my face off someday.

Not happy with the current version?

 

[pdib]

Way....

THAT'S CRAIYZY!!!

 

[Vapeaholic]

I just rebuilt one of my Nuppin's with another 26 g dual.

What ID and how many wraps? You liking it?

 

[supertrunker]

i run the fuse because i use the Dibi all day at work. I can blame a faulty fuse for the entire place burning down a lot easier than i can passing off using a BYFO strip!

A fuse shows some consideration (lol maybe!)

After the Thanksgiving lunch i endured today, i'm thinking C4 and screw them all!

T

 

[Vapeaholic]

i run the fuse because i use the Dibi all day at work. I can blame a faulty fuse for the entire place burning down a lot easier than i can passing off using a BYFO strip!

A fuse shows some consideration (lol maybe!)

After the Thanksgiving lunch i endured today, i'm thinking C4 and screw them all!

T

I can imagine you're a pleasure to work with T
My pocket mod is still my Reo for now. My Sumpin is still too new. Don't want to risk scratches.

 

[Kentastic]

THAT'S CRAIYZY!!!

Told you I was excitable and impatient/impulsive). Hopefully you'll find it's a cloud blower like it's supposed to be.

 

[supertrunker]

i'm a delight!

and it's 'for' - not 'with'.

T

 

[Vapeaholic]

Told you I was excitable and impatient/impulsive). Hopefully you'll find it's a cloud blower like it's supposed to be.

Damn! Is he serious?

 

[Vapeaholic]

i'm a delight!

and it's 'for' - not 'with'.

T

The 'for' is why they tell you you're a delight.

 

[supertrunker]

you gave him a chunk of wood and you have one.

I'm not seeing the difference!

0.28Ω on a Dublin - skeered??

T

 

[pdib]

Told you I was excitable and impatient/impulsive). Hopefully you'll find it's a cloud blower like it's supposed to be.

Well, now I'm excitable and impatient! I had made a mental list of the things I would expect/demand of a 22mm dripper, and then I started scouring reviews and such. I didn't even see this one at first (Sedge told me about it). Anyway, I found 2 atties, two, that met all my criteria and the Jam was one of those two. So, yeah! I'm excited!