is the waiting list up to 2 years yet?
be kinda like celebrating a vapersary....
kinda
be kinda like celebrating a vapersary....
kinda
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
So, a certain somebody, claiming birthday rights, has asked for a snippet. The mods aren't in snippet condition (no finish on them yet); however, I was meaning to submit a progress report this afternoon. So, it all works out. I wanted to thank you all for your patience and understanding on my slow-down in mod production. Things seem to be getting mostly back to normal now, and I'm hard at it on the mods. (i.e. full time) I'm doing topcap assembly glue-ups today. Next will be final shaping/flushing (tomorrow). Proper snippets should be later this week as I get into finishing.
So, secret person's birthday "snippets" are basically representative of the status of all mods (by midnight tonight, anyway).
Happy Birthday, Secret Person!!!!!!!
BTW: if it's not your birthday, don't ask. Anyway, I'll be out in the shop working, and any personal snippet requests will fall on deaf/absent ears.
So, secret person's birthday "snippets" are basically representative of the status of all mods (by midnight tonight, anyway).
Happy Birthday, Secret Person!!!!!!!
BTW: if it's not your birthday, don't ask. Anyway, I'll be out in the shop working, and any personal snippet requests will fall on deaf/absent ears.
Last edited:
especially you, VH! 
(these are from a while back . . .. pre-510 and topcap assembly prep . . .. maybe even pre- bodymags)
(these are from a while back . . .. pre-510 and topcap assembly prep . . .. maybe even pre- bodymags)
So, a certain somebody, claiming birthday rights, has asked for a snippet. The mods aren't in snippet condition (no finish on them yet); however, I was meaning to submit a progress report this afternoon. So, it all works out. I wanted to thank you all for your patience and understanding on my slow-down in mod production. Things seem to be getting mostly back to normal now, and I'm hard at it on the mods. (i.e. full time) I'm doing topcap assembly glue-ups today and don't intend to go to bed until they're all done. Next will be final shaping/flushing (tomorrow). Proper snippets should be later this week as I get into finishing.
So, secret person's birthday "snippets" are basically representative of the status of all mods (by midnight tonight, anyway).
Happy Birthday, Secret Person!!!!!!!
BTW: if it's not your birthday, don't ask. Anyway, I'll be out in the shop working, and any personal snippet requests will fall on deaf/absent ears.
Thanks, now the wife knows what she got me!
. . . . . . . . . . . . . ADDIT: OH! I thought you meant,
"Thanks, now the wife knows what she got me!"
but you really just meant,
"Thanks, now the wife knows what she got me!"
Last edited:
No I meant that in a good way, Now I can show the wife what's she's getting me. I yelled for her to come looks as soon as saw it !!!
Thanks again
No I meant that in a good way, Now I can show the wife what's she's getting me. I yelled for her to come looks as soon as saw it !!!
Thanks again
Happy Birthday!
So, a certain somebody, claiming birthday rights, has asked for a snippet. The mods aren't in snippet condition (no finish on them yet); however, I was meaning to submit a progress report this afternoon. So, it all works out. I wanted to thank you all for your patience and understanding on my slow-down in mod production. Things seem to be getting mostly back to normal now, and I'm hard at it on the mods. (i.e. full time) I'm doing topcap assembly glue-ups today. Next will be final shaping/flushing (tomorrow). Proper snippets should be later this week as I get into finishing.
So, secret person's birthday "snippets" are basically representative of the status of all mods (by midnight tonight, anyway).
Happy Birthday, Secret Person!!!!!!!
BTW: if it's not your birthday, don't ask. Anyway, I'll be out in the shop working, and any personal snippet requests will fall on deaf/absent ears.
so are the square 2001 monolith caps standard or an option? i thought Monkey might go for that...
(cough) it was my birthday Saturday.... just sayin.... not...
Go head and make fun me. 
Btw what size o-ring are in the bottle caps you use? I know they are way beefier and last longer than the REOs.
Btw what size o-ring are in the bottle caps you use? I know they are way beefier and last longer than the REOs.
Been playin' again.
Had a spare Triangle cap, SS tubing, and some misc silicone grommets laying around.
Thought, "Hey I'm an oversquonker because I like to get my MM really wet and that is messy cause sometimes juice leaks out so what can I come up with to prevent that?"
SS tube angles down.
Silicone inside is to prevent shorting out against positive post.
Silicone outside is to seal hole I drilled at an angle and down just missing the drip tip.
Looks really dorky.
Has to be assembled after the cap is on which is a PITA.
Air flow is a little constricted for me due to the thick SS tube.
Flavor and vapor are really good.
Can squonk the heck out of it without leaking.
(Yea I know it is on a VW mod, but I had to have a control subject which is OliveR with an identical RM2 with normal airhole placement)
Had a spare Triangle cap, SS tubing, and some misc silicone grommets laying around.
Thought, "Hey I'm an oversquonker because I like to get my MM really wet and that is messy cause sometimes juice leaks out so what can I come up with to prevent that?"
SS tube angles down.
Silicone inside is to prevent shorting out against positive post.
Silicone outside is to seal hole I drilled at an angle and down just missing the drip tip.
Looks really dorky.
Has to be assembled after the cap is on which is a PITA.
Air flow is a little constricted for me due to the thick SS tube.
Flavor and vapor are really good.
Can squonk the heck out of it without leaking.
(Yea I know it is on a VW mod, but I had to have a control subject which is OliveR with an identical RM2 with normal airhole placement)
Happy birthday Filthy-Beast! That mod is looking good. Congratulations in advance for your birthday gift!
Go head and make fun me.
Btw what size o-ring are in the bottle caps you use? I know they are way beefier and last longer than the REOs.
I thought they were the same size (1/16" CS, 1/2" OD). The only difference might be that they're N70, or 70 Duro, although that's the most common hardness*. (They are Buna-N Nitrile . . .. which I thought was typical as well.)
*I'm not sure if the hardness is established by the Nitrile content. However, I do know that the Nitrile content affects hardness (greater N = harder), and I know that:
"A higher Nitrile content enhances resistance to fuel and oil but elasticity and resistance to compression set is adversely affected"
Noticed "SECRET PERSON' opted for the modified bottle opening.Looks stronger and I like the PACMAN appearance.
Its a noticeable difference in thickness as you can see even with my crappy photo skills...
- Status
Similar threads
- Locked
