Infinity pro down!

[ihartmy510]

My other infinity pro gave up on me today... It was having intermittent firing issues the last couple of days... And now I get blue light but no power to the atty... Back to using the trusty blue one! Any trouble shooting tips?

Sent from my HTC Thunderclap using Tapatalk

 

[FreeFire]

Hmmmm...I was having some probs with mine to start........I figured it to be user error (me banging my forehead like a V-8 moment )

Clean the bottom cap edge and the bottom edge of the tube with a microfiber cloth. Make certain the little spring screw is tight as well as the top screw (the part that the atty/carto engage). You may also use a Q-tip with some rubbing alcohol and swab the threading as well. Also, tap the Ipro against your other hand a couple times. Give that a shot and report back.........over and out!

 

[ihartmy510]

Actually tried most of that... I should try cleaning the top cap though. Will report back after I clean up the top cap!

Sent from my HTC Thunderclap using Tapatalk

 

[ihartmy510]

Still no fire

Sent from my HTC Thunderclap using Tapatalk

 

[5cardstud]

If you have access to a meter check the Ipro to see if it's indeed no power.

 

[ihartmy510]

Indeed no power... Unless I'm using the meter wrong.

Sent from my HTC Thunderclap using Tapatalk

 

[908Tracy]

Indeed no power... Unless I'm using the meter wrong.

Sent from my HTC Thunderclap using Tapatalk

Poop! ...........

 

[BuzzKill]

Pull off the top cap and check the wire inside , it might be loose , use a round tool and stick it in the hole in the side, read the replacing tyhe top cap on the buzz thread first please /.

 

[5cardstud]

Pull off the top cap and check the wire inside , it might be loose , use a round tool and stick it in the hole in the side, read the replacing tyhe top cap on the buzz thread first please /.

That was my next advice too. Glad to see you Patrón.

Indeed no power... Unless I'm using the meter wrong.

Sent from my HTC Thunderclap using Tapatalk

Red to the center post and black to the top cap threads.

 

[BuzzKill]

Buzz Pro ,. I Pro , VvproV
troubleshooting check list

batteries charged ?? ( use a voltmeter if you have one , they should read 4.2 volts each )
Take off the atty /carto first
Do you have a RED LED light ?
DO you have a Blue Led light when the button is pushed.
DO you have a Blue led with the ATTY/CARTO ON the unit ?
Do you have BOTH red and Blue led lights ?
Do you get a blue led with the atty/carto ON but no vapor ?

 

[ihartmy510]

Buzz Pro ,. I Pro , VvproV
troubleshooting check list

batteries charged ?? ( use a voltmeter if you have one , they should read 4.2 volts each )
Take off the atty /carto first
Do you have a RED LED light ?
DO you have a Blue Led light when the button is pushed.
DO you have a Blue led with the ATTY/CARTO ON the unit ?
Do you have BOTH red and Blue led lights ?
Do you get a blue led with the atty/carto ON but no vapor ?

Well after a terrible day... I went to take off the top cap and the wire fell out of the little ring terminal. I guess that is a snapped wire. Before anyone says anything I did loosen the top screw prior to loosening the to cap... Fail on my part still.

Sent from my HTC Thunderclap using Tapatalk

 

[5cardstud]

Well after a terrible day... I went to take off the top cap and the wire fell out of the little ring terminal. I guess that is a snapped wire. Before anyone says anything I did loosen the top screw prior to loosening the to cap... Fail on my part still.

Sent from my HTC Thunderclap using Tapatalk

I'm thinking that was probably your problem and don't feel bad, I've done that same thing as have others. At least it's still connected to the pcb.

 

[ihartmy510]

Now how to fix this. .haha

Sent from my HTC Thunderclap using Tapatalk

 

[tsbman]

I'm thinking that was probably your problem and don't feel bad, I've done that same thing as have others. At least it's still connected to the pcb.

Can be fixed. I wondered about this when I took my top cap off and saw how it went together. The weak link is the wire from the board to the terminal at the cap. The wire will fail if you mess with it much, very likey wher the wire meets the terminal which is what sounds like happened.

If it were me, I might try and fix it. I know how to solder and all that. But considering that I do have the tools that would work ie; soldering iron, solder. Rounding up the right size heat shrink, right size terminal..... and Waking sure I didn't heat the board up too much while soldering and maybe damagin it.... uh, I think I would send it in to get fixed. That way I would know it would be done right. Chasing down the right parts is probably gonna be more aggravating than waiting for the shipping and repair to be done..... if you can wait!

 

[5cardstud]

Send it in. or go to Radio Shack and get a new end but be careful not to pull that wire of the PCB. They are machine soldered so it don't take much. I'd send it and have Teri fix it that girl is a wiz at fixing these. Mines better than it was new.

 

[5cardstud]

Can be fixed. I wondered about this when I took my top cap off and saw how it went together. The weak link is the wire from the board to the terminal at the cap. The wire will fail if you mess with it much, very likey wher the wire meets the terminal which is what sounds like happened.

If it were me, I might try and fix it. I know how to solder and all that. But considering that I do have the tools that would work ie; soldering iron, solder. Rounding up the right size heat shrink, right size terminal..... and Waking sure I didn't heat the board up too much while soldering and maybe damagin it.... uh, I think I would send it in to get fixed. That way I would know it would be done right. Chasing down the right parts is probably gonna be more aggravating than waiting for the shipping and repair to be done..... if you can wait!

They are fast. Mine was gone exactly 7 days almost to the hr. From when it left my hands until it was back in my hands.

 

[tsbman]

They are fast. Mine was gone exactly 7 days almost to the hr. From when it left my hands until it was back in my hands.

Customer Service again! 7 days is lightning quick!

 

[BuzzKill]

Best to send it in really ! you have a backup so you are covered

 

[5cardstud]

I think so and I'm a happy guy because it works perfect.

 

[ihartmy510]

I'll be sending it out on Monday!

Sent from my HTC Thunderclap using Tapatalk