INNOKIN COOLFIRE P60 KIT REVIEWED BY BIGBOB2322

Bigbob2322

Vaping Master
ECF Veteran
Verified Member
  • Jul 27, 2014
    8,513
    23,485
    Schiller PK IL USA
    Hello and welcome to today's review of the P60 Pod Mod Kit from Innokin. The P60 houses a 3200mAh internal battery and has a maximum wattage of 60 watts, this is a wattage only device. Having a 3200mAh battery the device has some weight to it but it's not heavy, there is adjustable airflow and it's suited for RDL or MTL vaping. The device has a lock switch that locks all buttons from functioning but in auto draw mode the device can be vaped . The pod has a true top fill feature with a capacity of 2/4mls.


    1754751022268.jpeg



    COLOR CHOICES


    1754751151713.jpeg



    IN THE BOX



    * 1pc Coolfire P60 Device

    * 1pc Coolfire P60 Pod Cartridge (4ml)

    * 1pc 0.6ohm Coil (Pre-installed)

    * 1pc 0.8ohm Coil

    * 1pc USB-C Cable

    * 1pc User Manual

    * 1pc Warranty Card


    20250803_071659.jpg



    SPECIFICATIONS AND PARAMETERS


    1754221512900blob.png



    FEATURES


    1754758385265.jpeg



    * Built-in 3200mAh battery with long-lasting endurance

    * Adjustable output power from 6W to 60W

    * 4ml refillable pod compatible with 0.4ohm, 0.6ohm, and 0.8ohm coils

    * Manual locking switch for safety during travel

    * Side airflow adjustment for precise control

    * 0.69" OLED screen with real-time vape info

    * Compact and stylish design with leather grip texture

    * USB Type-C fast charging (5V/2A)

    1754758428433.jpeg

    1754758662894.jpeg



    MTL AND RDL VAPING AND ALSO HAS A LOCK SWITCH


    1754758505239.jpeg


    1754758563778.jpeg



    FIRST IMPRESSIONS


    The Coolfire P60 lays in a slide out inner box from a outer case box that makes a nice initial impression, the 2nd pod , charge cord and paper info all lay underneath. Picking the device up I expected it to be heavier than it is which is a nice surprise, it has some weight and feels solid but it's not heavy. I started charging the device and found it was almost fully charged, bringing it to full capacity didn't take but a couple minutes.


    20250803_065520.jpg
     

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,513
    23,485
    Schiller PK IL USA
    20250803_065520.jpg

    20250803_065939.jpg

    20250803_070708.jpg

    20250803_071659.jpg




    I like the fact that Innokin ships the device wrapped in a stickem plastic wrap for protection, a short quick intro on the menu is printed on the sticker as well.


    20250809_065216.jpg

    20250803_072920.jpg



    Looking the device over the leather look that's on the sides and spine look good, I think think it's a sticker but the outer stitching really bring the look together. Having the charge port on the bottom of the device makes you lay it down during charging. Innokin thought to put a rubber surround around the charge port to protect your furniture from scratches, this does make the device easy to tip over though. All corners are rounded for a very comfortable hand feel.



    20250803_072707.jpg



    20250803_083654(1).jpg


    20250803_075446.jpg



    The pod connects to the device with 4 very strong magnets and because the airflow control is on the pod itself the pod can only be connected one way. The Ohm's of the coil inside the pod as well as the wattage range for that coil are printed on the lower portion of the pod.


    20250803_080910.jpg
     

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,513
    23,485
    Schiller PK IL USA
    20250803_075927.jpg

    20250803_074254.jpg

    20250809_070357.jpg



    These pods use a great top fill method with the rubber plug and refill's are done mess free, I also like that the pods are clear. Because of the design there is no sure way of checking pod capacity levels with a quick glance so I suggest pulling the pod and checking juice levels often.

    I personally think the Coolfire P60 works better as a RDL device rather than a MTL device because the mouthpiece for me has too large of a diameter that makes precise airflow adjustments harder than they should be. For MTL you either get a very airy loose vape or a very tight vape. I really like the lock switch and it's position on the device, remember to activate the auto draw before locking buttons.




    20250803_082003.jpg

    20250803_082038.jpg

    20250809_062515.jpg



    FINAL IMPRESSIONS


    I really like the design of the Coolfire P60 and the features it has, the top fill works fine but I wish I could see the entire pod for viewing juice levels.

    I also wish the draw tube had a more narrow bore to it or used replaceable drip tips, I think that would solve the airy airflow issue when using it in MTL.

    The display screen is fine but on the darker side, once it's set battery level is really all you look at anyway and it shows alright.

    This device is really very simple to operate and that's another plus for it. It really works very well in RDL mode and puts out good flavor.

    I would like to thank Alisa and Innokin for sending the Coolfire P60 for review, and thank you to all of you that read my reviews.


    THANK YOU
    BIGBOB2322
     

    Users who are viewing this thread