The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.
Innokin_Paul
iSub-B.jpg
Innokin_Paul
iSub-B.jpg
iSub-B- 1.jpg
iSub-B- 2.jpg
iSub-B- 3.jpg
iSub-B- 4.jpg
iSub-B - 5.jpg
iSub-B Tank.png
iSub-B.jpg

Innokin iSub-B with Plex3D 'Next Generation 3D Mesh' Coils

Vape Bigger Flavors at lower Watts and enjoy the iSub-B and Plex3D 'Next Generation 3D Mesh Coils'
iSub-B.jpg iSub-B- 1.jpg iSub-B- 2.jpg iSub-B- 3.jpg iSub-B- 4.jpg iSub-B - 5.jpg iSub-B Tank.png iSub-B.jpg
Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Innokin_Paul

    Innokin_Paul Brand Manager ECF Veteran

    Nov 21, 2013
    Shenzhen
  2. Jingles

    Jingles Ultra Member Verified Member ECF Veteran

    Supporting member
    Jul 18, 2011
    Ohio
    I just received this today. The instructions say to fill the tank, you unscrew the top cap. I can't get mine unscrewed. I have tried pliers, but it's hard to get a grip on it due to the bevel and I don't want to break the glass. Any tricks to getting the top cap unscrewed??
     
    • Like Like x 1
    • Useful Useful x 1
  3. Innokin_Joseph

    Innokin_Joseph Brand Rep

    Jul 9, 2015
    Hey Jingles,

    I actually had a similar problem with my own iSub-B. The first run had a number of tanks tightened too much from the factory, and fortunately has been rectified. However, many will encounter the situation you're in from the first batch. Here are my personal tips that worked for me to get that top cap to budge!

    1. Let the tank sit in the freezer for about 30 minutes. This allows the o-rings to shrink slightly. Heat can do the same, but can damage your o-rings permanently if you aren't careful.

    2. Use rubber latex gloves while turning the top of the tank to improve your grip.

    3. Wrap the Innokin vape band or a rubber band around the top section of the tank for more grip, or for protection if you are using pliers or a similar tool.

    4. Run the tank under hot water for a minute or two. It can have a similar affect to step 1 if the freezer drink didn't help much.

    You will likely need to use a combination of these to get it to move, but I promise it'll get there. I spent a good hour and a half getting my first one open, and then the later revised batch unscrewed immediately without issue. I do apologize for the trouble! Out of curiosity, what color iSub-B is giving you trouble?
     
    • Like Like x 1
    • Useful Useful x 1
  4. Jingles

    Jingles Ultra Member Verified Member ECF Veteran

    Supporting member
    Jul 18, 2011
    Ohio
    It's a blue tank. Trying the freezer trick this morning. Still not having much luck. Thanks for trying to help...
     
    • Love Love x 1
    • Optimistic Optimistic x 1
  5. Jingles

    Jingles Ultra Member Verified Member ECF Veteran

    Supporting member
    Jul 18, 2011
    Ohio
    Update: I finally got it open tonight! I used the Innokin vape band around the top cap and that finally did the trick Earlier this morning while trying pliers once again I broke the drip tip. I have another drip tip that fits, so all is well. I filled it with some Root Beer juice and it's vaping great. ( I was real close to giving up on it and asking for a refund from my vendor. Childproof really means grandma proof)!
     
    • Like Like x 1
    • Winner Winner x 1
    • Love Love x 1
  6. Innokin_Joseph

    Innokin_Joseph Brand Rep

    Jul 9, 2015
    Hey Jingles,

    That's great to hear! I do apologize again for the issue of getting it open. It was a pain for me as a young guy! The vape band around the top threaded section is what helped me get mine open as well. Sorry to hear about your drip tip :( We offer spares on our webstore if you are interested in getting a replacement.

    Glad to hear it's working well for you now. What kind of root beer ejuice are you vaping? I find root beer to be a great flavor for vaping as the flavor profile is extremely similar to actual root beer.
     
  7. jdy

    jdy Vaping Master Verified Member ECF Veteran

    Hi @Innokin_Joseph
    The Innokin iSub-B with Plex3D with 'Next Generation 3D Mesh' Coils looks like everything I'm looking for.

    My question here is on the coils. Have they been tested with Nic Salts. Can I use a low nic level Nic Salts with the 3D Mesh without diminishing the quality?
    Thank you in advance for any insight you can offer
     
  8. Innokin_Joseph

    Innokin_Joseph Brand Rep

    Jul 9, 2015
    Hey @jdy! Thanks for taking a look at the iSub-B!

    Starting with the Plexus coil structure, we found that utilizing mesh with lower wattage settings allowed for a great experience with nic salts. The combination of even heat distribution of the mesh with the lower output required provides great flavor with smooth hits. This is exactly why the Plexus coil found its way to our Zenith (MTL) tank, and the EQ Pod kit. It's only improved upon with the Plex3D coils, as the overall power consumption of the coils stays low but offers you the option of turning the heat up a bit. 30-50w is the standard operating range of the Plex3D iSub coil and it does indeed do a great job with nic salts. Be aware that the vapor output is quite high despite the lower wattage range and if you want to up the intensity of your flavor, low airflow settings should do the trick.

    Thanks again and hope this helps!
     
  9. jdy

    jdy Vaping Master Verified Member ECF Veteran

    As long as it's not one from the first run and has no problems opening as Jingles had! That makes it PERFECT!! Exactly what I was looking for, I've just ordered a silver one and I'm so excited for delivery.
    Thank you @Innokin_Joseph
     
  10. jdy

    jdy Vaping Master Verified Member ECF Veteran

    HI @Innokin_Joseph
    My order just came in today, I got vape mail YEA.

    First off, the top opened easily no problems. Then I love the look the lightly colored reflections in the glass that is very nice upgrade. Topper is the flavor with the Plex3D Mesh it is double the flavor compared to the tank it is replacing. I will not name names, but hands down at least double the flavor. Now as long as this coil continues with such great performance for a fair amount of time I will be ecstatic!
    Right now it is a perfect vape. Thank you
     
    • Like Like x 2
  11. Innokin_Joseph

    Innokin_Joseph Brand Rep

    Jul 9, 2015
    Great to hear @jdy! The rainbow tinted glass is certainly a head turner. Awesome to hear the flavor has impressed you! How has your coil life been so far? Thanks again for picking up the iSub-B!
     
  12. jdy

    jdy Vaping Master Verified Member ECF Veteran

    HI @Innokin_Joseph , I'm still impressed but.....Sorry to report I've just had to change the coil that's only two weeks and I do not chain vape. But I do use a high VG mix normally I run 80 VG/20 PG, the 20 includes flavor and a dash of DW.
    I'll chock it up to that since with the new coil in there today is back to a great vape, but yesterday with the two week old coil not so much.
    Thank you for asking!
    jdy
     
  13. Innokin_Joseph

    Innokin_Joseph Brand Rep

    Jul 9, 2015
    Hm, two weeks doesn't seem too bad, especially with a high VG percentage. General average seems to be about one week with heavy use, and two with moderate use. Let me know how the new coil works out! You might be able to squeeze a little more life out of coils with thinner juice or sweetener free juice.
     
    • Like Like x 1
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice