All the best things about the iTaste MVP, SVD and 134 come together in Innokin's VTR. This device is built like a tank and hits the same way. The
VTR can be adjusted from 3.0 to 6.0 volts in .1-volt increments, or from 3.0 to 15.0 watts in .5-watt increments. It features a recessed 510
connection, which gives the innokin VTR a unique look when appropriate tanks are attached. This kit comes included with an adapter to allow the use of eGo-
threaded atomizers or any device that simply won't fit into the recessed area, while maintaining a uniform look. The VTR uses an IMR 18650 battery,
which will last most users all day. It also features a built-in ohm-meter to check the resistance of your attached coil. There is no other mod quite
like this one! No clearomizer come with this kit.
Features in Brief:
* Variable Voltage: 3.0 6.0 volts
* Variable Wattage: 3.0 15.0 W
* Short Circuit Protection;
* RMS (root mean square);
* Reverse Battery Protection Circuit;
* Resistive Load Detection (Ohms meter);
* ON/OFF battery switch;
* LED Battery Power Display;
* Low Voltage Warning;
* Overtime Vaping Warning (10 second switch cutoff);
* Battery safety protection (Vent holes);
* High compatibility 510/eGo connector:
* Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output)
* Replaceable Battery: iTaste VTR supports 18650 batteries (unprotected)
* Maximum Current Output: 5.0 Amperage
* The iTaste VTR fits perfectly with iTaste Leather Carrying Case for MVP!
Innokin iTaste VTR Mod doesnt come with any battery or charger .We recommend you use the Panasonic NCR18650B 3400mAh rechargeable Li-Ion Battery (without protection), Other types of batteries
may damage your iTaste VTR.
Brand:Innokin
Material:Zinc alloy
Unit:1 Set
Color:Chrome/Jungle Camo
VTR Body Size:Length .87" (22.2mm);Width 2.14" (54.4mm); Height 4.17" (106 mm)
Each set contains:
1pc iTaste VTR
1pc Adapter cone
1pc Beauty ring
1pc Manual
1pc Luxury box
Warranty:30 Days for VTR body. Only accept DOA for other parts.
VTR can be adjusted from 3.0 to 6.0 volts in .1-volt increments, or from 3.0 to 15.0 watts in .5-watt increments. It features a recessed 510
connection, which gives the innokin VTR a unique look when appropriate tanks are attached. This kit comes included with an adapter to allow the use of eGo-
threaded atomizers or any device that simply won't fit into the recessed area, while maintaining a uniform look. The VTR uses an IMR 18650 battery,
which will last most users all day. It also features a built-in ohm-meter to check the resistance of your attached coil. There is no other mod quite
like this one! No clearomizer come with this kit.
Features in Brief:
* Variable Voltage: 3.0 6.0 volts
* Variable Wattage: 3.0 15.0 W
* Short Circuit Protection;
* RMS (root mean square);
* Reverse Battery Protection Circuit;
* Resistive Load Detection (Ohms meter);
* ON/OFF battery switch;
* LED Battery Power Display;
* Low Voltage Warning;
* Overtime Vaping Warning (10 second switch cutoff);
* Battery safety protection (Vent holes);
* High compatibility 510/eGo connector:
* Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output)
* Replaceable Battery: iTaste VTR supports 18650 batteries (unprotected)
* Maximum Current Output: 5.0 Amperage
* The iTaste VTR fits perfectly with iTaste Leather Carrying Case for MVP!
Innokin iTaste VTR Mod doesnt come with any battery or charger .We recommend you use the Panasonic NCR18650B 3400mAh rechargeable Li-Ion Battery (without protection), Other types of batteries
may damage your iTaste VTR.
Brand:Innokin
Material:Zinc alloy
Unit:1 Set
Color:Chrome/Jungle Camo
VTR Body Size:Length .87" (22.2mm);Width 2.14" (54.4mm); Height 4.17" (106 mm)
Each set contains:
1pc iTaste VTR
1pc Adapter cone
1pc Beauty ring
1pc Manual
1pc Luxury box
Warranty:30 Days for VTR body. Only accept DOA for other parts.
