Innokin Itaste vv v3.0 burning up all my coils

[DeathTheKid]

I recently got an itaste v3 from a local vape shop about a week ago and i have gone through 3 atomizers. I originally bought an Aspire Mini Nova BDC with the itaste and within the same day my vape started loosing taste, so i turned down my voltage to 4.5 figuring that i started at too high of a voltage, but the next day i was getting a strong burning taste. I cleaned out my atomizer and tank but there was still a burning taste. So i went in the next day and asked, they just recommended i get replacement coil and turn down my voltage to about 3.8 because the Aspire coils are picky on resistance. So i turned down my itaste to 3.7 and withint a day it had lost its taste and began tasting burnt. That same day the bottom of the tank was pulled off and my tank was ruined. So finally today i decided to get a new tank with a higher ohms coil and went with the iSmoka BCC Mega hearing good things about it. The draw is tight, but i was getting good clouds and flavor at 3.9 volts on the 2.2 ohm coil. But after the whole day, my vape is starting to lose its taste all over again. At this point the only other thing i can think of causing the problem is the Itaste. Its also a 50/50 juice too so its kind of strange to get that burn. Im thinking of just trying to refund my Itaste for a replacement at this point.

 

[WarHawk-AVG]

Why don't you run it in wattage mode?

what does it say the resistance is on the coils?

 

[Jimi D.]

Sounds like a coil gunking problem to me. It's probably the juice.

 

[erikbal]

I have an ismoka bcc mega and use 50/50 juice and was getting a lot of dry hits with it so I ended up having to remove a few wicks and that took care of it. I also have a 2.2ohm head in it right now and don't run it any higher than 3.8-4v usually.

Sent from my DROID4 using Tapatalk

 

[roosterado]

I have had the Itaste VV VW 3.0 for about 1 month. I have been using IClear 16 and 16D, 2 carto tanks 1.5 and 3 ohm,EVod 2 ohm

I use SmokeTek prepunched 3 hole cartos for the tanks as I use thick e-liquid. So Far running 7 to 10 watts they are lasting well. I also use these on my Vision Spinner 2 1600mah between 3.7 and 4.2 volts Oh I'm use about 3 mils of juice a day

 

[mgaruccio]

That resistance/voltage is only about 7 watts so the coils shouldn't be burning unless your getting dry hits. Do you chain vape?

Sent from my HTC6500LVW using Tapatalk

 

[Orrhexis]

I've had my itaste vv3.0 for about 2 days now w/ a aspire et-s bdc glassomizer and I'm kicking myself for not upgrading to vw a long time ago. To me it sounds like you are running your itaste in vv mode manually picking a voltage that could be way off for resistance of your coils. Just hold down your + then power button for 2 seconds. Find a comfortable wattage and let it pick the best voltage settings automatically. If you change into vv mode to play remember to switch back to vw. I'm brand new to vv/vw but this could be your problem.