Innokin MVP revised... wow!

[Shel]

What do you guys think of the upcoming revision to the Innokin MVP? I love that it makes for a smaller package, by recessing the tank into the device. Also seems to have a dial on top, perhaps to dial in voltage? I'm sure that the recessed tank will reduce battery life, but seeing as I'm currently getting 3 days on my MVP, I'll gladly exchange some battery life, for a more compact design! I generally keep my MVP or Spinner in my shirt pocket, and the tip sticking out looks rather funny... this should eliminate that issue! Now, add an Ohm reading function, lose the 999 burn function, and they'll have one amazing device on their hands!!!

 

[DuffTime]

Is that a battery door I see? MVP quality with a battery I can replace? Sign me up!

Not sure how well the recessed tank area will accept certain larger delivery systems. Maybe offer it with an extender/recessed area filler?

 

[Shel]

Is that a battery door I see? MVP quality with a battery I can replace? Sign me up!

Not sure how well the recessed tank area will accept certain larger delivery systems. Maybe offer it with an extender/recessed area filler?

I would guess it's designed to work with the iClear 30, and would therefore assume that it would work with the Kanger ProTank.

I just got my first ProTank, and so far, really like it! (I'm kind of late to the party)

I'd actually prefer the built in battery, similar to the MVP. I don't have any issue with a built in battery, and prefer the option to charge it in my car, using a micro USB charger that's in my car anyways to service my cell phone.

 

[deanbob]

That's not the revision for the MVP, it's an as yet unnamed device; Innokin are currently holding a competition to name it on Facebook
MVP v.3 should be out by the end of the month and will likely look the same with the addition of VW and Ω meter.
Personally can't wait for the '134'

 

[Zillabird]

I can't wait to get my hands on one of these bad boys.

 

[peraspera]

That's not the revision for the MVP, it's an as yet unnamed device; Innokin are currently holding a competition to name it on Facebook
MVP v.3 should be out by the end of the month and will likely look the same with the addition of VW and Ω meter.
Personally can't wait for the '134'

Not saying he is correct but Vapor Joe commented on his blog that it is to be an upgrade to the MVP. He also said he couldn't get a release date.

 

[BostonVape]

I just wish it wasn't made for the iclear30.. since I've really started to hate mine lately

 

[DavidOck]

I, too, had read that Innokin was putting out a V3 MVP, with ohm checker and so on, and this new replaceable battery mod. We'll see...

And while I like the idea of the new one, if it only takes the Iclear, it could be a deal breaker for me, as well.

 

[QuikWgn]

It should take anything similar in height/diameter to an iClear30. So that would include the Kanger protank and most of the carto tanks.

 

[candimccann]

Is the fire button in the middle of the dial? Looks like it might be inconvenient.

 

[QuikWgn]

Thats what we are quessing the brass bit is...but if you look at the first pic there is also what might be a rectangular button on the side which could be the fire switch.

 

[zipflint]

I really dig the look of that, but I'm not a big fan of the iClear30, or top coils in general.
But I like EVERYTHING else about it. Even in its unfinished(?) state with all the exposed
screw heads.

 

[deanbob]

Not saying he is correct but Vapor Joe commented on his blog that it is to be an upgrade to the MVP. He also said he couldn't get a release date.

And I'm not saying he is wrong... But all he has done is taken the readily available photos [of the un-named device] from Innokins Facebook [linked earlier] and watermarked them!

With his involvement in the *Fasttech / Innokin / is it fake / is it real* scandal [if we can call it that] I doubt that he'd get more than a fart to chew on from Innokin; let alone inside information or a release date...

I will stick to my guns and put my money on the fact that it's not going to be the new MVP, different box mod entirely.

Anyway I'm banging on and you only asked for an opinion on the device, sorry. I'll be interested to see it with any other tank other than the iclear30, so will wait for you to post some pictures when and if you do place an order

 

[puchox]

Idk, i have a MVP and SVD, this doesn't look that good for me. But you know, to each their own

I wish they made an MVP mini of sorts, where the clearo could be inside the device. Kinda like this one but with a lipo battery like the mvp

 

[Kevin H]

That's not the revision for the MVP, it's an as yet unnamed device; Innokin are currently holding a competition to name it on Facebook
MVP v.3 should be out by the end of the month and will likely look the same with the addition of VW and Ω meter.
Personally can't wait for the '134'

That's what I had read in a couple of different places too. The 134 looks really cool!

 

[tA71ana]

I think it is really sharp, but if it only works/looks good with just the iClear that would be kind of a drag

 

[jefsview]

It was already stated that this is NOT the V3 MVP (from the article at Tasteyourjuice.com -- Meet George from Innokin), This is a brand new Box mod with replaceable battery, hence why they're doing a naming contest on facebook.

Also forthcoming are glass iclears... and Innokin likes to place their new clearomizers onto new mods, like the iclear30s were rolled out with the SVD. So the new Box mod might have those new glass iclear tanks.

The new Mod does look nifty, and will surely make everyone forget about Segelei's T-Max.

 

[BostonVape]

if I can't put an evod on that thing.. i sadly will not be getting it

 

[MamaTried]

i just now ripped open my MVP order from FT. whatever that new one is, it looks fantastic. i see more Innokin on my horizon

 

[zipflint]

I dig that wacky gatling-gun-style thing as well. The 143 or whatever.