Innokin Owners Group Thread

[awsum140]

The weight is fine with me. Then again I think a 134 isn't too heavy either, LOL.

 

[ian91]

The problem is I always seem to find something "better". Loved the iClear30, had a stable of them, then somebody, who like llamas, talked me into a Fogger. Now I have a stable of them. Now I am fooling with a Flash E-Vapor which works as a dripper or a tank and it is outstanding, so far. Add to that temperature control, titanium wire and rayon wick.

I have the leather case for the VTR, too, and don't use it. It really doesn't work very well, at least for me. It forever comes un-snapped if it brushes against anything and flops around like a fish. I use a phone case for emergency response people, holds my phone and my mod along with a flashlight and pen.

We must have a different case. Mine slides on and has a bottom flap that you tuck in. Impossible for it to come un-done.

 

[ian91]

The weight is fine with me. Then again I think a 134 isn't too heavy either, LOL.

I don't care about the weight either but it seems that most people do.

 

[awsum140]

We must have a different case. Mine slides on and has a bottom flap that you tuck in. Impossible for it to come un-done.

Mine is the original from innokin and has a snap strap over the top of the VTR and two snaps that hold the case closed over the spare battery or liquid being carried. Velcro would have been a better solution. It does look nice though.

 

[ian91]

The problem is I always seem to find something "better". Loved the iClear30, had a stable of them, then somebody, who like llamas, talked me into a Fogger. Now I have a stable of them. Now I am fooling with a Flash E-Vapor which works as a dripper or a tank and it is outstanding, so far. Add to that temperature control, titanium wire and rayon wick.

I have the leather case for the VTR, too, and don't use it. It really doesn't work very well, at least for me. It forever comes un-snapped if it brushes against anything and flops around like a fish. I use a phone case for emergency response people, holds my phone and my mod along with a flashlight and pen.

I used to have a ton of rbas as well. I finally decided that I was a kayfun person. Got rid of everything else and stopped buying any more. I am sure there are better ones out there but as long as I don't know about them, I am happy!!! I only vape at 1.2ohm and I have no desire to get into sub-ohming.

 

[ian91]

Mine is the original from Innokin and has a snap strap over the top of the VTR and two snaps that hold the case closed over the spare battery or liquid being carried. Velcro would have been a better solution. It does look nice though.

Bought mine from Etsy about a year and a half ago when I got the first VTR. They just stopped selling them a few months ago. I guess no more demand.

 

[awsum140]

If you get into temperature control you'll be sub ohming out of necessity. It doe extend the life of coils by a big margin by the way, at least from my experience anyway.

 

[AndriaD]

The problem is I always seem to find something "better". Loved the iClear30, had a stable of them, then somebody, who like llamas, talked me into a Fogger. Now I have a stable of them. Now I am fooling with a Flash E-Vapor which works as a dripper or a tank and it is outstanding, so far. Add to that temperature control, titanium wire and rayon wick.

I have the leather case for the VTR, too, and don't use it. It really doesn't work very well, at least for me. It forever comes un-snapped if it brushes against anything and flops around like a fish. I use a phone case for emergency response people, holds my phone and my mod along with a flashlight and pen.

The first part of that sounds eerily familiar, except for me it was T3S's, then Kayfuns, now Achilles. And the Achilles has led me to the idea of TC, which leads naturally to titanium. I still don't like rayon though.

I gave up on the VTR as a possible when I discovered Kayfuns. I broached the idea to my husband about cutting off the ring, but he's disinclined to buy something for $80 and then perform "amateur surgery" on it. There *is* the Kato, which now has been cloned, but it's a mech, not everyone's first choice.

Andria

 

[ian91]

If you get into temperature control you'll be sub ohming out of necessity. It doe extend the life of coils by a big margin by the way, at least from my experience anyway.

I decided that I will stick with mods in the 30 watt range with my Kayfuns. Don't see the need for temperature control unless you are sub-ohming. Problem right now is that you can go crazy buying all the new toys we have. I was doing that and kept going back to my VTR and MVPs. I got rid of the MVP2s and bought a couple of MVP20s. Works for me. What I have right now got me off smoking which is what it was supposed to do. Intent was not to suck my wallet dry. Now I stick to the basics, make my own coils and make my own juice. Keeping it low cost!!

 

[Eric Auer]

Thing im looking most forward to with Innokins TC solution is that they claim it will work with various type of coil materials.

I never tried a nickel coil as I get a rash from nickel against my skin.

Dont see the point for me to risk it in my lungs.

Eric

 

[Katdarling]

I used to have a ton of rbas as well. I finally decided that I was a kayfun person. Got rid of everything else and stopped buying any more. I am sure there are better ones out there but as long as I don't know about them, I am happy!!! I only vape at 1.2ohm and I have no desire to get into sub-ohming.

Hello Tootle Puffer

 

[awsum140]

TC does reduce/eliminate burning of liquids which, in turn extends coil and wick life significantly in my experience. Throw in the FDA and what they may "deem" as acceptable and TC is a good choice in reality. TC does require sub ohm coils as it is implemented now. Other than that exception, my stuff is all 1 ohm or greater. I still tootle puff my cig-a-likes that are so convenient when my hands are busy, but lung hits with a decent set up are great!

 

[ian91]

Hello Tootle Puffer

Yes, I am a Tootle Puffer. I have been monitoring your other thread!!!!

 

[bobwho77]

I am a big fan of the VTR. I just bought another one as it seemed that less and less stores are carrying it. With the 15 watt limit, I guess there is not much demand for this other than for the form factor. Would be nice if they made a newer version. I have had my eye on the XVOstick but I can't justify the cost. Waiting for a clone.

Love the look of the VTR it would be great to upgrade it, maybe with a CFIV, or even the 3.0 pro chip. (ARE YOU LISTENING INNOKIN)

 

[bobwho77]

If it works well and is durable like Innokin usually is I'll go for it.

My vaping habits support a one tank system just fine.

All I use is a MVP20W and a Nautilus anyhow on a daily basis so no big deal.

Eric

HEY! that's MY rig!!!

 

[DPLongo22]

OOOOPS!

Wrong thread.

 

[mastiffhound]

I've been thinking, have they not come out with different coils for the iSub tank because they'll be releasing them with a new TC mod?

 

[PaulBHC]

SVD 2.0 sale $19.99


Innokin iTaste SVD 2.0 - Black - Mister-E-Liquid.com


Innokin iTaste SVD 2.0 - Silver - Mister-E-Liquid.com

 

[ThunderDan]

Wow.

 

[VapieDan]

SVD 2.0 sale $19.99


Innokin iTaste SVD 2.0 - Black - Mister-E-Liquid.com


Innokin iTaste SVD 2.0 - Silver - Mister-E-Liquid.com

Great find! I never really bothered with Mister-E-Liquid for hardware. Always thought they were primarily a liquid source. What is really odd is that they are not listed in the clearance section. I would have never found it. The SVD is also on sale for $9.99 also not listed in clearance.

Innokin iTaste SVD from Mister-E-Liquid